VJ X8R
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for High Temperature Applications Up to 150 °C
FEATURES
• Specialty: high temperature applications
• High operating temperature dielectric: 150 °C
• Maintains capacitance at high temperature for
frequency stability
• Wet build process
• Reliable Noble Metal Electrode (NME) system
Available
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
APPLICATIONS
• High temperature modules
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at +25 °C unless otherwise specified.
Operating Temperature: -55 °C to +150 °C
Aging Rate: 1 % maximum per decade
Capacitance Range: 330 pF to 220 nF
Insulation Resistance (IR):
at +25 °C and rated voltage 100 000 MΩ minimum or
1000 ΩF, whichever is less
at +125 °C and rated voltage 10 000 MΩ minimum or
100 ΩF, whichever is less
Voltage Range: 25 VDC to 100 VDC
Temperature Coefficient of Capacitance (TCC):
± 15 % from -55 °C to +150 °C
Dissipation Factor (DF):
25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz
> 25 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz
Dielectric Strength Test:
performed per method 103 of EIA-198-2-E
Applied test voltage:
≤ 100 VDC-rated: 250 % of rated voltage
Document Number: 45006
1
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 02-Mar-2021
VJ X8R
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CAPACITANCE
CASE
MAXIMUM VOLTAGE
(V)
MINIMUM
MAXIMUM
0402
100
330 pF
6.8 nF
0603
100
470 pF
33 nF
0805
100
470 pF
100 nF
1206
50
1.0 nF
220 nF
1210
50
10 nF
220 nF
X8R
Note
• Detail ratings see “Selection Chart”
ORDERING INFORMATION
VJ0805
H
102
K
X
A
CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC VOLTAGE
CODE
NOMINAL
TOLERANCE
RATING (1)
CODE
0402
0603
0805
1206
1210
H = X8R
J=±5%
K = ± 10 %
M = ± 20 %
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier.
Examples:
102 = 1000 pF
X = Ni barrier
100 % tin plated
F, E = AgPd (3)(5)
X = 25 V
A = 50 V
B = 100 V
A
MARKING
(4)
C
### (2)
PACKAGING
PROCESS
CODE
A = unmarked
M = marked
Note
Marking is only
available for
0805 and 1206
with termination
code “X”
T = 7" reel / plastic tape
C = 7" reel / paper tape
R = 11 1/4" / 13" reel / plastic tape
P = 11 1/4" / 13" reel / paper tape
O = 7" reel / flamed paper tape
I = 11 1/4" / 13" reel / flamed paper tape
Note
“I” and “O” are used for
“F” termination size 0603 / 0805 and
“E” termination size 0402 / 0603 / 0805
Notes
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: mlcc@vishay.com
(2) Process code may be added with up to three digits, used to control non-standard products and requirements
(3) Termination code “E” for conductive epoxy assembly
(4) Marking in reference to EIA198, see www.vishay.com/doc?45028
(5) Termination code “F” not available for 0402, 0603 - 100 V, 0805 - 100 V
ENVIRONMENTAL STATUS
TERMINATION CODE
TERMINATION DESCRIPTION
RoHS COMPLIANT
VISHAY GREEN
X
Ni barrier 100 % tin plated matte finish
Yes
Yes
E
AgPd
Yes
Yes
F
AgPd
Yes
No
Document Number: 45006
2
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 02-Mar-2021
VJ X8R
www.vishay.com
Vishay Vitramon
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
LENGTH
(L)
WIDTH
(W)
MAXIMUM THICKNESS
(T)
VJ0402
0.040 + 0.004/- 0.002
(1.00 + 0.10/- 0.05)
0.020 + 0.004/- 0.002
(0.50 + 0.10/- 0.05)
0603
VJ0603
0.063 ± 0.006
(1.60 ± 0.15)
0805
VJ0805
1206
1210
CASE
CODE
STYLE
0402
TERMINATION
(P)
MINIMUM
MAXIMUM
0.024
(0.60)
0.004
(0.10)
0.016
(0.41)
0.031 ± 0.006
(0.80 ± 0.15)
0.036
(0.92)
0.012
(0.30)
0.022
(0.55)
0.079 ± 0.008
(2.00 ± 0.20)
0.049 ± 0.008
(1.25 ± 0.20)
0.057
(1.45)
0.010
(0.25)
0.030
(0.76)
VJ1206
0.126 ± 0.010
(3.20 ± 0.25)
0.063 ± 0.010
(1.60 ± 0.25)
0.067
(1.70)
0.010
(0.25)
0.030
(0.76)
VJ1210
0.126 ± 0.010
(3.20 ± 0.25)
0.098 ± 0.010
(2.50 ± 0.25)
0.067
(1.70)
0.010
(0.25)
0.030
(0.76)
Document Number: 45006
3
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 02-Mar-2021
VJ X8R
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
X8R
25
X
CAP.
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1.0 nF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
12 nF
15 nF
18 nF
22 nF
27 nF
33 nF
39 nF
47 nF
56 nF
68 nF
82 nF
100 nF
120 nF
150 nF
180 nF
220 nF
270 nF
330 nF
390 nF
VJ0402
0402
50
A
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
100
B
••
••
••
••
••
••
••
••
25
X
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
VJ0603
0603
50
A
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
100
B
25
X
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
VJ0805
0805
50
A
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
100
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
VJ1206 (1)
1206
25
50
X
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1210 (1)
1210
25
50
X
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
• Plastic tape, •• Paper tape
RoHS-compliant
X8R PACKAGING QUANTITIES
CASE CODE
TAPE SIZE
0402
0603
0805 (2)
1206 (2)
1210 (2)
8 mm
8 mm
8 mm
8 mm
8 mm
(1)
7" REEL QUANTITIES
PACKAGING CODE
“C” / “O”
“T”
5000
n/a
4000
n/a
3000
3000
n/a
2500 / 3000
n/a
2000 / 2500 / 3000
11 1/4" AND 13" REEL QUANTITIES
PACKAGING CODE
“P” / “I”
“R”
10 000
n/a
10 000
n/a
10 000
10 000
10 000
9000 / 10 000
10 000
9000 / 10 000
Notes
(1) Reference: EIA standard RS481 - “Taping of Surface Mount Components for Automatic Placement”
(2) Packaging “C” / “P” / “O” / “I” and “T” / “R” or lower quantities can depend from product thickness
Document Number: 45006
4
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 02-Mar-2021
VJ X8R
www.vishay.com
Vishay Vitramon
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to 40 °C ambient temperature and ≤ 70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
X8R DIELECTRIC - TYPICAL PARAMETERS
TEMPERATURE COEFFICIENT OF CAPACITANCE
10
5
0
-5
- 10
- 15
AGING RATE
1.0
% CAPACITANCE CHANGE
% CAPACITANCE CHANGE
15
0.0
- 1.0
- 2.0
- 3.0
- 4.0
- 20
- 75 - 50 - 25
0
25
50
75 100 125 150 175
1
10
100
HOURS
TEMPERATURE °C
5.0
4.5
0.023
4.0
% DISSIPATION FACTOR
DISSIPATION FACTOR
10 000
DISSIPATION FACTOR VS. TEMPERATURE
DISSIPATION FACTOR VS. VOLTAGE
0.025
0.021
0.019
0.017
0.015
3.5
3.0
2.5
X8R
2.0
1.5
1.0
0.5
0.0
0.013
0
10
20
30
DC VOLTS APPLIED
40
- 75 - 50 - 25
50
0
25
50 75 100 125 150 175
TEMPERATURE °C
VOLTAGE COEFFICIENT OF CAPACITANCE
0.0
10 000
- 5.0
INSULATION RESISTANCE
(ΩF)
CAPACITANCE CHANGE IN %
1000
INSULATION RESISTANCE VS. TEMPERATURE
1000
- 10.0
- 15.0
- 20.0
100
10
- 25.0
0
10
20
30
DC VOLTS APPLIED
40
50
10
25
100
TEMPERATURE °C
150
Document Number: 45006
5
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 02-Mar-2021
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023
1
Document Number: 91000