VJ1210Y224MXXAT

Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications FEATURES • AEC-Q200 qualified with PPAP available • Available in 0402 to 1812 body size • High operating temperature • Wet build process • Reliable Noble Metal Electrode (NME) system • Parts compliant with ELV directive • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 For more than 30 years Vishay Vitramon has supported the automotive industry with robust, highly reliable MLCCs that have made it a leader in this segment. All Vishay Vitramon MLCCs are manufactured in “Precious Metal Technology” (PMT / NME) and a wet build process. They are qualified according to AEC-Q200 with PPAP available on request. Applications for these devices include automotive “under the hood”, safety and comfort electronics. Their termination finish is 100 % matte tin plate finish. A polymer (flexible) termination with 100 % matte tin plate finish is offered for boardflex sensitive applications. C0G (NP0) DIELECTRIC X7R, X8R DIELECTRIC GENERAL SPECIFICATION GENERAL SPECIFICATION Note Electrical characteristics at +25 °C unless otherwise specified Note Electrical characteristics at +25 °C unless otherwise specified Operating Temperature: -55 °C to +150 °C (above +125 °C changed characteristics, see 2.2) Operating Temperature: -55 °C to +150 °C (X7R above +125 °C changed characteristics, see 2.2) Capacitance Range: 22 pF to 22 nF Capacitance Range: 120 pF to 1.0 μF Voltage Range: 25 VDC to 3000 VDC Voltage Range: 16 VDC to 1000 VDC Temperature Coefficient of Capacitance (TCC): 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C Temperature Coefficient of Capacitance (TCC): X7R: ± 15 % from -55 °C to +125 °C, with 0 VDC applied X8R: ± 15 % from -55 °C to +150 °C, with 0 VDC applied Dissipation Factor (DF): 0.1 % maximum at 1.0 VRMS and 1 MHz for values ≤ 1000 pF 0.1 % maximum at 1.0 VRMS and 1 kHz for values > 1000 pF Dissipation Factor (DF): 16 V, 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz > 25 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz Insulating Resistance: at +25 °C 100 000 MΩ min. or 1000 ΩF whichever is less at +125 °C 10 000 MΩ min. or 100 ΩF whichever is less Insulating Resistance: at +25 °C 100 000 MΩ min. or 1000 ΩF whichever is less at +125 °C 10 000 MΩ min. or 100 ΩF whichever is less X8R: at +150 °C 10 000 MΩ min. or 100 ΩF whichever is less Aging: 0 % maximum per decade Aging Rate: 1 % maximum per decade Dielectric Strength Test: performed per method 103 of EIA 198-2-E. Applied test voltages ≤ 250 VDC-rated: 250 % of rated voltage 500 VDC-rated: 200 % of rated voltage 630 VDC, 1000 VDC-rated: 150 % of rated voltage 3000 VDC-rated: 120 % of rated voltage Dielectric Strength Test: performed per method 103 of EIA 198-2-E. Applied test voltages ≤ 250 VDC-rated: 250 % of rated voltage 500 VDC-rated: min. 150 % of rated voltage 630 VDC, 1000 VDC-rated: min. 120 % of rated voltage Revision: 03-Jul-2023 Document Number: 45226 1 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon QUICK REFERENCE DATA DIELECTRIC CASE CODE MAXIMUM VOLTAGE (V) CAPACITANCE MINIMUM MAXIMUM 0402 100 22 pF 220 pF 0603 200 56 pF 1.0 nF 0805 500 100 pF 3.9 nF 1206 630 100 pF 8.2 nF 1210 630 100 pF 12 nF 1812 3000 33 pF 22 nF 0402 100 120 pF 33 nF 0603 200 330 pF 150 nF 0805 250 330 pF 470 nF 1206 1000 220 pF 1.0 μF 1210 630 390 pF 1.0 μF 1812 630 10 nF 1.0 μF 0402 100 330 pF 6.8 nF 0603 100 470 pF 33 nF 0805 100 470 pF 100 nF 1206 50 1.0 nF 220 nF 1210 50 10 nF 220 nF C0G (NP0) X7R X8R Note • Detail ratings see “Selection Chart” Revision: 03-Jul-2023 Document Number: 45226 2 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon ORDERING INFORMATION - TIN TERMINATION VJ0805 CASE CODE 0402 0603 0805 1206 1210 1812 Y 102 K DIELECTRIC CAPACITANCE NOMINAL CODE A = C0G (NP0) Y = X7R H = X8R X CAPACITANCE TOLERANCE A TERMINATION DC VOLTAGE RATING (1) X = Ni barrier B = ± 0.10 pF Expressed in 100 % matte tin C = ± 0.25 pF picofarads (pF). plate finish D = ± 0.5 pF The first two B = polymer F=±1% digits are 100 % matte tin G=±2% significant, the plate finish (2) J=±5% third is a K = ± 10 % multiplier. An M = ± 20 % “R” indicates a Note decimal point. C0G (NP0): Examples B, C, D < 10 pF 4R7 = 4.7 pF 102 = 1000 pF F, G, J, K ≥ 10 pF X7R / X8R: J, K, M J = 16 V X = 25 V A = 50 V B = 100 V C = 200 V P = 250 V E = 500 V L = 630 V G = 1000 V H = 3000 V B C 31X MARKING (3) PACKAGING PROCESS CODE A = unmarked B = marked Note Marking for 0805 and 1206 vendor ID and date code 31X = Automotive MLCC RoHS conform T = 7" reel / plastic tape C = 7" reel / paper tape R = 11 1/4" / 13" reel / plastic tape P = 11 1/4" / 13" reel / paper tape Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: mlcc@vishay.com (2) Polymer termination contact mlcc@vishay.com for availability of ratings. Packaging only in plastic tape “T” / “R” (3) No marking on 1206 size - 1000 V DIMENSIONS in inches (millimeters) W L T MAX. P TERMINATIONS PAD (P) STYLE LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) MINIMUM MAXIMUM 0402 VJ0402 0.040 + 0.004 / - 0.002 (1.00 + 0.10 / - 0.05) 0.020 + 0.004 / - 0.002 (0.50 + 0.10 / - 0.05) 0.024 (0.60) 0.004 (0.10) 0.016 (0.41) 0603 VJ0603 0.063 ± 0.006 (1.60 ± 0.15) 0.031 ± 0.006 (0.80 ± 0.15) 0.038 (0.97) 0.012 (0.30) 0.018 (0.46) 0805 VJ0805 0.079 ± 0.008 (2.00 ± 0.20) 0.049 ± 0.008 (1.25 ± 0.20) 0.057 (1.45) 0.010 (0.25) 0.028 (0.71) 1206 VJ1206 0.126 ± 0.010 (3.20 ± 0.25) 0.063 ± 0.010 (1.60 ± 0.25) 0.067 (1.70) 0.010 (0.25) 0.028 (0.71) 1210 VJ1210 0.126 ± 0.010 (3.20 ± 0.25) 0.098 ± 0.010 (2.50 ± 0.25) 0.076 (1.94) 0.010 (0.25) 0.028 (0.71) 1812 VJ1812 0.177 ± 0.010 (4.50 ± 0.25) 0.126 ± 0.010 (3.20 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) CASE CODE Note • Polymer (B-termination) part length increased by 0.006" (0.15 mm) Revision: 03-Jul-2023 have increased dimensions: Document Number: 45226 3 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC STYLE CASE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE CAP. 1R0 1.0 pF 1R2 1.2 pF 1R5 1.5 pF 1R8 1.8 pF 2R2 2.2 pF 2R7 2.7 pF 3R3 3.3 pF 3R9 3.9 pF 4R7 4.7 pF 5R6 5.6 pF 6R8 6.8 pF 8R2 8.2 pF 100 10 pF 120 12 pF 150 15 pF 180 18 pF 220 22 pF 270 27 pF 330 33 pF 390 39 pF 470 47 pF 560 56 pF 680 68 pF 820 82 pF 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1.0 nF 122 1.2 nF 152 1.5 nF 182 1.8 nF 222 2.2 nF 272 2.7 nF 332 3.3 nF 392 3.9 nF 472 4.7 nF 562 5.6 nF 682 6.8 nF 822 8.2 nF 103 10 nF 123 12 nF 153 15 nF 183 18 nF 223 22 nF 273 27 nF 333 33 nF 393 39 nF 473 47 nF 563 56 nF 25 X VJ0402 0402 50 A 100 B 50 A C0G (NP0) VJ0603 0603 100 200 B C 50 A VJ0805 0805 100 200 B C 500 E (1) (1) (1) •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • •• •• •• •• •• •• •• •• •• •• •• •• •• • • • •• •• •• •• •• •• •• •• • • • • • •• •• •• •• • • • • • Notes •• Paper tape, • Plastic tape - For soldering conditions see Vishay Soldering Recommendations www.vishay.com/doc?45034 (1) Alternative product see GA…31M, GA...34G Automotive HIFREQ Series www.vishay.com/doc?45248 Revision: 03-Jul-2023 Document Number: 45226 4 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ1206 VJ1210 CASE CODE 1206 1210 50 100 200 250 500 630 50 100 200 500 630 50 100 VOLTAGE (VDC) VOLTAGE CODE A B C P E L A B C E L A B CAP. CODE CAP. 1R0 1.0 pF 1R2 1.2 pF 1R5 1.5 pF 1R8 1.8 pF 2R2 2.2 pF 2R7 2.7 pF 3R3 3.3 pF 3R9 3.9 pF 4R7 4.7 pF 5R6 5.6 pF 6R8 6.8 pF 8R2 8.2 pF (1) 100 10 pF 120 12 pF 150 15 pF 180 18 pF 220 22 pF 270 27 pF 330 33 pF 390 39 pF • • 470 47 pF • • 560 56 pF • • 680 68 pF • • 820 82 pF • • 101 100 pF • • • • • • • • • • • • 121 120 pF • • • • • • • • • • • • 151 150 pF • • • • • • • • • • • • 181 180 pF • • • • • • • • • • • • 221 220 pF • • • • • • • • • • • • 271 270 pF • • • • • • • • • • • • 331 330 pF • • • • • • • • • • • • 391 390 pF • • • • • • • • • • • • 471 470 pF • • • • • • • • • • • • 561 560 pF • • • • • • • • • • • • 681 680 pF • • • • • • • • • • • • 821 820 pF • • • • • • • • • • • • 102 1.0 nF • • • • • • • • • • • • 122 1.2 nF • • • • • • • • • • 152 1.5 nF • • • • • • • • • • 182 1.8 nF • • • • • • • • • • 222 2.2 nF • • • • • • • • • 272 2.7 nF • • • • • • • • 332 3.3 nF • • • • • • • • 392 3.9 nF • • • • • • • 472 4.7 nF • • • • • • • 562 5.6 nF • • • • • • • 682 6.8 nF • • • • • • • 822 8.2 nF • • • • • • • 103 10 nF • • • • 123 12 nF • • • • 153 15 nF • • 183 18 nF • 223 22 nF • 273 27 nF 333 33 nF 393 39 nF 473 47 nF 563 56 nF Notes •• Paper tape, • Plastic tape - For soldering conditions see Vishay Soldering Recommendations www.vishay.com/doc?45034 (1) Alternative product see GA…31M, GA...34G Automotive HIFREQ Series www.vishay.com/doc?45248 Revision: 03-Jul-2023 200 C • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • VJ1812 1812 500 630 E L • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 1000 G 3000 H • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Document Number: 45226 5 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE VJ0402 VJ0603 CASE CODE 0402 0603 VOLTAGE (VDC) 16 25 50 100 16 25 50 100 200 VOLTAGE CODE J X A B J X A B C CAP. CODE CAP. 121 120 pF •• •• •• •• 151 150 pF •• •• •• •• 181 180 pF •• •• •• •• 221 220 pF •• •• •• •• 271 270 pF •• •• •• •• 331 330 pF •• •• •• •• •• •• •• 391 390 pF •• •• •• •• •• •• •• •• •• 471 470 pF •• •• •• •• •• •• •• •• •• 561 560 pF •• •• •• •• •• •• •• •• •• 681 680 pF •• •• •• •• •• •• •• •• •• 821 820 pF •• •• •• •• •• •• •• •• •• 102 1.0 nF •• •• •• •• •• •• •• •• •• 122 1.2 nF •• •• •• •• •• •• •• •• •• 152 1.5 nF •• •• •• •• •• •• •• •• •• 182 1.8 nF •• •• •• •• •• •• •• •• •• 222 2.2 nF •• •• •• •• •• •• •• •• •• 272 2.7 nF •• •• •• •• •• •• •• •• •• 332 3.3 nF •• •• •• •• •• •• •• •• •• 392 3.9 nF •• •• •• •• •• •• •• •• •• 472 4.7 nF •• •• •• •• •• •• •• •• •• 562 5.6 nF •• •• •• •• •• •• •• 682 6.8 nF •• •• •• •• •• •• •• 822 8.2 nF •• •• •• •• •• •• •• 103 10 nF •• •• •• •• •• •• •• 123 12 nF •• •• •• •• •• •• 153 15 nF •• •• •• •• •• •• 183 18 nF •• •• •• •• •• •• 223 22 nF •• •• •• •• •• 273 27 nF •• •• •• •• •• 333 33 nF •• •• •• •• •• 393 39 nF •• •• •• •• 473 47 nF •• •• •• 563 56 nF •• •• •• 683 68 nF •• •• •• 823 82 nF •• •• •• 104 100 nF •• •• •• 124 120 nF •• 154 150 nF •• 184 180 nF 224 220 nF 274 270 nF 334 330 nF 394 390 nF 474 470 nF 564 560 nF 684 680 nF 824 820 nF 105 1.0 μF 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF 275 2.7 μF 335 3.3 μF 395 3.9 μF 475 4.7 μF 565 5.6 μF 685 6.8 μF Notes •• Paper tape, • Plastic tape - For soldering conditions see Vishay Soldering Recommendations www.vishay.com/doc?45034 Revision: 03-Jul-2023 16 J 25 X •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • • • • • • • •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • • • • • VJ0805 0805 50 100 A B •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • • • 200 C •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • 250 P •• Document Number: 45226 6 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE VJ1206 VJ1210 CASE CODE 1206 1210 VOLTAGE (VDC) 16 25 50 100 200 500 630 1000 16 25 50 100 200 VOLTAGE CODE J X A B C E L G J X A B C CAP. CODE CAP. 121 120 pF 151 150 pF 181 180 pF 221 220 pF • • 271 270 pF • • 331 330 pF • • 391 390 pF • • 471 470 pF • • 561 560 pF • • 681 680 pF • • 821 820 pF • • • • • 102 1.0 nF • • • • • • • • 122 1.2 nF • • • • • • • 152 1.5 nF • • • • • • • 182 1.8 nF • • • • • • • 222 2.2 nF • • • • • • • • 272 2.7 nF • • • • • • • • 332 3.3 nF • • • • • • • • 392 3.9 nF • • • • • • • • 472 4.7 nF • • • • • • • • 562 5.6 nF • • • • • • • • 682 6.8 nF • • • • • • • • 822 8.2 nF • • • • • • • • 103 10 nF • • • • • • • • • • • • 123 12 nF • • • • • • • • • • • • 153 15 nF • • • • • • • • • • • • 183 18 nF • • • • • • • • • • • • 223 22 nF • • • • • • • • • • 273 27 nF • • • • • • • • • • 333 33 nF • • • • • • • • • • 393 39 nF • • • • • • • • • • 473 47 nF • • • • • • • • • • 563 56 nF • • • • • • • • • • 683 68 nF • • • • • • • • • • 823 82 nF • • • • • • • • • • 104 100 nF • • • • • • • • • • 124 120 nF • • • • • • • • • • 154 150 nF • • • • • • • • • 184 180 nF • • • • • • • • • 224 220 nF • • • • • • • • 274 270 nF • • • • • • • • 334 330 nF • • • • • • • 394 390 nF • • • • • • • 474 470 nF • • • • • • • 564 560 nF • • • • • 684 680 nF • • • • • 824 820 nF • • • • • 105 1.0 μF • • • • • 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF 275 2.7 μF 335 3.3 μF 395 3.9 μF 475 4.7 μF 565 5.6 μF 685 6.8 μF Notes • Plastic tape - For soldering conditions see Vishay Soldering Recommendations www.vishay.com/doc?45034 Revision: 03-Jul-2023 500 E 630 L • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 50 A • • • • • • • • • • • • • • • • • • • • • VJ1812 1812 100 200 500 B C E • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 630 L • • • • • • • • • • • • Document Number: 45226 7 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X8R STYLE VJ0402 VJ0603 VJ0805 CASE CODE 0402 0603 0805 25 50 100 25 50 100 25 50 VOLTAGE (VDC) VOLTAGE CODE X A B X A B X A CAP. CODE CAP. 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF •• •• •• 391 390 pF •• •• •• 471 470 pF •• •• •• •• •• •• •• 561 560 pF •• •• •• •• •• •• •• 681 680 pF •• •• •• •• •• •• •• •• 821 820 pF •• •• •• •• •• •• •• •• 102 1.0 nF •• •• •• •• •• •• •• •• 122 1.2 nF •• •• •• •• •• •• •• •• 152 1.5 nF •• •• •• •• •• •• •• 182 1.8 nF •• •• •• •• •• •• •• 222 2.2 nF •• •• •• •• •• •• •• 272 2.7 nF •• •• •• •• •• •• 332 3.3 nF •• •• •• •• •• •• 392 3.9 nF •• •• •• •• •• •• 472 4.7 nF •• •• •• •• •• •• 562 5.6 nF •• •• •• •• •• 682 6.8 nF •• •• •• •• •• 822 8.2 nF •• •• •• •• 103 10 nF •• •• •• •• 123 12 nF •• •• •• •• 153 15 nF •• •• •• •• 183 18 nF •• •• •• •• 223 22 nF •• •• •• 273 27 nF •• •• • 333 33 nF •• •• • 393 39 nF •• • 473 47 nF • • 563 56 nF • • 683 68 nF • 823 82 nF • 104 100 nF • 124 120 nF 154 150 nF 184 180 nF 224 220 nF 274 270 nF 334 330 nF 394 390 nF 474 470 nF 564 560 nF 684 680 nF 824 820 nF 105 1.0 μF 125 1.2 μF Notes •• Paper tape, • Plastic tape - For soldering conditions see Vishay Soldering Recommendations www.vishay.com/doc?45034 Revision: 03-Jul-2023 100 B •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • VJ1206 1206 25 50 X A • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • VJ1210 1210 25 50 X A • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Document Number: 45226 8 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon STANDARD PACKAGING QUANTITIES (1)(2) 7" REEL QUANTITIES 11 1/4" AND 13" REEL QUANTITIES CASE CODE TAPE SIZE PAPER TAPE PACKAGING CODE “C” PLASTIC TAPE PACKAGING CODE “T” PAPER TAPE PACKAGING CODE “P” PLASTIC TAPE PACKAGING CODE “R” 0402 8 mm 5000 / 10 000 (3) n/a 10 000 / 30 000 (3) n/a 0603 (5) 8 mm 4000 4000 10 000 10 000 0805 (4)(5) 8 mm 3000 3000 10 000 10 000 1206 (4)(5) 8 mm 3000 2500 / 3000 10 000 10 000 1210 (4) 8 mm n/a 2000 / 2500 / 3000 n/a 9000 / 10 000 1812 12 mm n/a 1000 n/a 4000 Notes (1) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” (2) n/a = not available (3) Quantity can vary with customer request (4) Packaging “C” / “P” or “T” / “R” and quantity can depend from product thickness (5) Polymer termination, code “B”, only available in plastic tape “T” / “R” Revision: 03-Jul-2023 Document Number: 45226 9 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon 1 - GENERAL CERTIFICATES # Quality management system according to ISO/IATF 16949: 2016 Yes # Quality management system according to ISO 9001: 2015 Yes # Environmental certification according to ISO 14001: 2015 Yes # Health and safety system according to ISO 45001 Yes 2 - TECHNICAL REQUIREMENTS Unless specified in component specification, these parameters are the minimum requirements for the components. 2.1 OPERATING TEMPERATURE RANGE For standard applications TA: -55 °C to +125 °C See characteristics 2.2 For high temperature applications TA: -55 °C to +150 °C See characteristics 2.2 For ultra high temperature applications TA: -55 °C to +175 °C See characteristics 2.2 2.2 CHARACTERISTICS PARAMETER Rated voltage in temperature range -55 °C to +125 °C CERAMIC TYPE C0G (NP0) X7R Rated voltage in temperature range -55 °C to +150 °C RATINGS TEST CONDITIONS / REMARKS 25 V to 3000 V UR 16 V to 1000 V X8R 25 V to 100 V C0G (NP0) 25 V to 100 V X7R 16 V to 100 V C0G (NP0) 25 V to 100 V UDC ≤ 1/4 UR X7R 16 V to 100 V UDC ≤ 1/4 UR X8R 25 V to 100 V UDC ≤ 1/4 UR if CR < 10 pF: αC ≤ ± 120 ppm/°C UDC ≤ 1/2 UR UDC ≤ 1/2 UR Derating at higher temperature up to +150 °C Derating at higher temperature up to +175 °C Temperature coefficient in temperature range -55 °C to +125 °C SYMBOL C0G (NP0) αC ≤ ± 30 ppm/°C X7R ΔC ≤ ± 15 % C0G (NP0) αC Temperature coefficient in temperature range -55 °C to +150 °C X7R X8R Temperature coefficient in temperature range -55 °C to +175 °C X7R ΔC ΔC X7R X8R UR for VJ0603Y104*A (100 nF / 50 V) if CR < 10 pF: αC ≤ ± 120 ppm/°C + 15 % / - 30 % ≤ ± 15 % + 15 % / - 50 % ≤ 0.0015 C0G (NP0) Dissipation factor in temperature range -55 °C to +175 °C ≤ ± 30 ppm/°C UDC ≤ 1/ 4 tan δ ≤ 0.06 ≤ 0.06 2.3 STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to 40 °C ambient temperature and ≤ 70 % relative humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 03-Jul-2023 Document Number: 45226 10 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS Temperature Dependence of Capacitance Insulation Resistance vs. Temperature 10000 10 000 10000 0.6 100 -0.2 -0.4 -50 0 50 100 1000 100 100 10 10 10 -0.6 1000 1st line 2nd line 0 2nd line Insulation Resistance (ΩF) 1000 0.2 1st line 2nd line 2nd line Capacitance Change (%) 0.4 10 150 25 Aging Rate 0.2 1000 0 100 -0.1 -0.2 100 1000 10 10 000 10000 0.1 1000 1st line 2nd line 0.1 2nd line Capacitance Change (%) 10000 1st line 2nd line 2nd line Capacitance Change (%) 150 Voltage Coefficient of Capacitance 0.2 10 100 Temperature (°C) Temperature (°C) 1 50 0 100 -0.1 10 -0.2 0 Hours 10 20 30 40 50 60 70 80 90 100 Applied DC Voltage (VDC) Change of Capacitance with Frequency 10000 1 1000 1st line 2nd line 2nd line Capacitance Change (%) 2 0 100 -1 -2 1 10 100 10 1000 Frequency (kHz) Revision: 03-Jul-2023 Document Number: 45226 11 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon X7R DIELECTRIC - TYPICAL PARAMETERS Temperature Coefficient of Capacitance Minimum Insulation Resistance vs. Temperature 10000 10 000 10000 15 -5 -10 100 -15 -20 1000 1000 100 100 1st line 2nd line 1000 0 2nd line Insulation Resistance (ΩF) 5 1st line 2nd line 2nd line Capacitance Change (%) 10 -25 -75 -50 -25 0 10 10 10 -30 20 25 50 75 100 125 150 175 40 60 100 120 140 160 180 Temperature (°C) Temperature (°C) Dissipation Factor vs. Temperature 6.0 80 Aging Rate 10000 1 10000 5.5 1000 3.5 3.0 2.5 2.0 100 1.5 1.0 0 1000 -1 1st line 2nd line 4.0 2nd line Capacitance Change (%) 4.5 1st line 2nd line 2nd line Dissipation Factor (%) 5.0 -2 100 -3 0.5 -75 -50 -25 0 25 50 75 100 125 150 175 1 10 100 1000 Hours Temperature (°C) Rated Voltage vs. Temperature (1) Voltage Coefficient of Capacitance 10000 5 10000 200 100 100 50 -5 1000 1st line 2nd line 1000 150 2nd line Capacitance Change (%) 0 1st line 2nd line 2nd line Rated Voltage (%) 10 10 000 -4 10 0 -10 25 V rated -15 50 V rated -25 10 0 -75 -50 -25 0 25 50 75 100 125 150 175 Temperature (°C) 100 -20 100 V rated 10 -30 0 10 20 30 40 50 60 70 80 90 100 Applied DC Voltage (VDC) Note (1) Except for VJ0603Y104*A (100 nF / 50 V), see section “2.2 Characteristics” Revision: 03-Jul-2023 Document Number: 45226 12 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon X7R DIELECTRIC - TYPICAL PARAMETERS Dissipation Factor vs. Voltage Dissipation Factor vs. Voltage 0.020 0.020 10000 100 V 100 50 V 0.008 1000 1st line 2nd line 0.012 2nd line Dissipation Factor 0.016 1000 1st line 2nd line 2nd line Dissipation Factor 0.016 10000 0.012 100 0.008 500 V / 630 V 200 V 10 0.004 0 10 20 30 40 50 60 70 80 10 0.004 90 100 0 Applied DC Voltage (VDC) 100 100 Frequency (kHz) Revision: 03-Jul-2023 10 1000 500 600 700 10000 15 1000 1st line 2nd line 2nd line Dissipation Factor (%) 1st line 2nd line 2nd line Capacitance Change (%) -10 10 400 Change of Dissipation Factor with Frequency 1000 1 300 20 10000 -20 200 Applied DC Voltage (VDC) Change of Capacitance with Frequency 0 100 10 100 5 0 1 10 100 10 1000 Frequency (kHz) Document Number: 45226 13 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon X8R DIELECTRIC - TYPICAL PARAMETERS Temperature Coefficient of Capacitance Minimum Insulation Resistance vs. Temperature 10000 10 000 10000 15 -5 100 -10 1000 1000 100 100 1st line 2nd line 1000 0 2nd line Insulation Resistance (ΩF) 5 1st line 2nd line 2nd line Capacitance Change (%) 10 -15 -20 -100 0 50 100 150 10 10 10 -50 10 200 25 100 150 Temperature (°C) Temperature (°C) Aging Rate Dissipation Factor vs. Temperature 5.0 10000 1 10000 1000 3.0 2.5 2.0 100 1.5 1.0 0 1000 -1 1st line 2nd line 3.5 1st line 2nd line 2nd line Dissipation Factor (%) 4.0 2nd line Capacitance Change (%) 4.5 -2 100 -3 0.5 0 -100 10 -50 0 50 100 Temperature (°C) Revision: 03-Jul-2023 150 200 -4 1 10 100 1000 10 10 000 Hours Document Number: 45226 14 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon 3 - LOT ACCEPTANCE TESTS Process tests available in classes (on request) GROUP ACTION A Components are tested within the monitoring program of the supplier. The supplier shall submit the part numbers of the selected component to the customer during the component specification discussions. B Components (customer P/N) shall be tested quarterly. Records available only on special request by the customer. C Test with each shipment. Records are provided on a monthly basis. Customer special requirement; requirement should be determined in a specific component specification. Upon request the records can be submitted in electronic format on monthly basis. 3.1 THERMAL STRENGTH, THERMAL SHOCK SENSIBILITY Sample size 200 Handling Mounted on PCB Thermal shock 1 x 280 °C, no pre-heat, 5 s to 10 s IR - test (IRATS) U = UR, T = room temperature, verified Burn in (BIATS) Equivalent to 12 h burn-in, 2 x UR/125 °C, verification time to failure Acceptance criteria: zero defects (IRATS and BIATS). 3.2 BOARD FLEX TEST Sample size 20 pcs/lot Frequency At least three different part numbers of one component family matrix per quarter Max. deflection 8 mm (data to be reported, available on request) 3.3 SOLDERABILITY / RESISTANCE TO SOLDERING HEAT Temperature profile for reflow soldering of SMD parts IPC/JEDEC-J-STD-020C. Test is done on a regular basis for samples taken randomly out of the line. Acceptance criteria: at least 95 % new solder and no detachment or leaching of terminations. 4 - ENVIRONMENTAL REQUIREMENTS A list of the chemical substances content, which must not be used or whose use shall be limited by international law, is available on request. Vishay confirms that the components specified in this specification do not contain asbestos nor cadmium, not even in the smallest volumes. The manufacturer / supplier confirms that the component during normal handling, storage and assembly, as well as during operation in the automobile, is non toxic. Revision: 03-Jul-2023 Document Number: 45226 15 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon 5 - INSPECTION CRITERIA The supplier shall carry out visual examination with suitable equipment with approximately 10 x magnification and lighting appropriate to the specimen under test and the required quality level. Chipping The components shall be free of cracks or fissures. Small damages which do not deteriorate the performance of the component shall be less than 50 % of the surface of the MLCC as defined in EIA 595. Delamination or Exposed Electrodes No visible separation or delamination between layers of the capacitor and no exposed electrodes between the two terminals of the capacitor must be seen. Metallization For the metallization, no visible detachment of the metallized terminals and no exposed electrodes must be seen. Defects and gaps in the metallization on each sides of the terminal must not exceed 10 % of the total area (e.g. A, B, C, …). Leaching shall not exceed 25 %. A B C Electrode Distance The ceramic body shall be free of any conducting material between the terminals which reduces the distance of the electrodes. The minimum distance “D” is 400 μm for all package sizes, except 0402. For the component package 0402 the minimum distance is 200 μm. D Revision: 03-Jul-2023 Document Number: 45226 16 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon 6 - BOARD FLEX TEST CONDITIONS 6.1 BOARD FLEX DEFINITIONS OF TEST PCB thickness = (1.6 ± 0.1) mm Copper thickness = 35 μm Material FR4 (EP-GC 02 according to DIN 40 802) LAYOUT / PAD DESIGN (Dimensions in mm) CASE CODE PAD SIZE LB 1.00 1.30 1.80 2.80 3.60 LL 2.20 3.40 4.50 4.50 4.75 0603 0805 1206 1210 1812 LEL 0.75 1.20 1.20 1.30 1.50 LB Note • LL = total length; LB = width of the pad; LEL = single pad length LEL LL 6.2 SOLDERING INSTRUCTIONS THICKNESS, RECOMMENDED FOR SOLDER PASTE (Reflow soldering) CASE CODE THICKNESS in μm 0402 75 to 90 0603 150 to 200 0805 150 to 200 1206 150 to 200 1210 150 to 200 1812 150 to 200 6.3 TYPICAL TEMPERATURE PROFILE FOR REFLOW SOLDERING (Boardflex test) LEAD (Pb)-FREE SOLDERING PROFILE 300 MIN. 300 s MIN. 255 °C MAX. 260 °C TEMPERATURE (°C) 250 T (SOLID) MIN. 217 °C MIN. 190 °C 200 MIN. 40 s MIN. 90 s 150 100 RAMP DOWN FROM T (SOLID) MAX. 6 K/s RAMP UP TO 150 °C MAX. 3 K/s 50 MIN. 110 s 0 0 Revision: 03-Jul-2023 50 100 150 200 250 300 350 400 TIME (s) Document Number: 45226 17 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon 6.4 MOUNTING, DIMENSIONS, AND TESTING Mounting SMD under test Printed board before test 1.6 ± 0.1 + R=3 + 45 ± 2 Support Solder 90 ± 1 Testing Width 20 Material: Aluminum Width = actual width of substrate + 5 mm on both sides Radius 1 to 2 10 ± 0.1 Printed board during test + + Displacement D = min. 2 mm All dimensions in mm 6.5 PERFORMANCE OF THE TEST(S) A) Electrical test according to component specification (Cap, DF, IR) B) Mounting to PCB C) Storage at room temperature (min. 10 h) D) Board flex test 6.6 DETAILS X7R, X8R PCB to be deflected continuously, speed 1 mm/s (± 0.5 mm/s) C0G PCB to be deflected in steps until cracks or other damages are visible or can be measured. Dwell time between steps: (5 ± 1) s 6.7 FAILURE CRITERIA X7R, X8R Piezoelectric sensor, no failure up to min. 2 mm C0G ΔC/C < 1 % or < 1 pF, no failure up to min. 2 mm Both Electrical test according to component specification Revision: 03-Jul-2023 Document Number: 45226 18 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: GA....31G Automotive MLCC VJ....31X RoHS Automotive MLCC www.vishay.com Vishay Vitramon 7 - AEC-Q200 QUALIFICATION TESTING NO. AEC-Q200 TEST ITEM REFERENCE 1 Pre- and post stress electrical test User spec 3 High temp exposure (storage) MIL-STD-202, method 108 4 Temperature cycling JESD22, method JA-104 5 Destructive physical analysis EIA-469 6 Moisture resistance MIL-STD-202, method 106 7 Biased humidity MIL-STD-202, method 103 8 Operation life MIL-STD-202 method 108 9 External Visual MIL-STD-883 method 2009 10 Physical dimension JESD22, method JB-100 13 Mechanical shock MIL-STD-202, method 213 14 Vibration MIL-STD-202, method 204 15 Resistance to solder heat MIL-STD-202, method 210 17 ESD AEC-Q200-002 18 Solderability J-STD-002 19 Electrical characterization User spec 21 Board flex AEC-Q200-005 22 Terminal strength AEC-Q200-006 23 Beam load AEC-Q200-003 Revision: 03-Jul-2023 Document Number: 45226 19 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000