VJ2008Y272KXUSTX2

Use This Link to Check Out the New Combined C0G (NP0) and X7R Datasheet VJ Safety Certified Capacitors X7R www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES • Approved IEC 60384-14 Available • Specialty: safety certified capacitors • AEC-Q200 qualified available with PPAP • Wet build process • Reliable Noble Metal Electrode (NME) system • Flexible termination “W” for improved bending capability performance (1) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note (1) “W” flexible termination under qualification APPLICATIONS • Power supplies • EMI and AC line filtering • EV charging systems • AC equipment and appliances • Lighting strike and voltage surge protection • Isolators • Facsimile and telephone ELECTRICAL SPECIFICATIONS Note • Electrical characteristics at +25 °C unless otherwise specified Operating Temperature: -55 °C to +125 °C Capacitance Range X1 / Y2 (1): 100 pF to 4.7 nF Capacitance Range X2 (1): 100 pF to 12 nF Voltage Range: 250 VAC Temperature Coefficient of Capacitance (TCC): ± 15 % from -55 °C to +125 °C, with 0 VDC applied Dissipation Factor (DF) (1): 2.5 % maximum Note (1) Test conditions per IEC 60384-14: 1.0 VRMS at 1 kHz Insulating Resistance: at +25 °C 100 000 MΩ min. or 1000 ΩF whichever is less at +125 °C 10 000 MΩ min. or 100 ΩF whichever is less Aging Rate: 1 % maximum per decade Voltage Proof Test: X1 / Y2: min. 1500 VAC X2: min. 1075 VDC Peak Impulse Voltage: X1 / Y2: 5000 V X2: 2500 V Voltage Rating DC: X1 / Y2: 2000 VDC X2: 1500 VDC Climatic Category According to EN 60068-1: 55/125/21 Revision: 06-Jul-2020 Document Number: 45020 1 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Use This Link to Check Out the New Combined C0G (NP0) and X7R Datasheet VJ Safety Certified Capacitors X7R www.vishay.com Vishay Vitramon QUICK REFERENCE DATA DIELECTRIC CAPACITANCE MAXIMUM VOLTAGE (VAC) MINIMUM MAXIMUM 2008 250 100 pF 1.0 nF 2220 250 270 pF 4.7 nF 2008 250 100 pF 2.7 nF 2220 250 270 pF 12 nF CASE X7R (X1 / Y2) X7R (X2) Notes • Detail ratings see “Selection Chart” • Size 2008 is compatible with 1808 solderlands and full conform with the IEC-60384-14 requirements for creepage distance ORDERING INFORMATION VJ2008 Y 102 CASE CODE DIELECTRIC 2008 2220 Y = X7R K X U CAPACITANCE CAPACITANCE TERMINATION AC VOLTAGE NOMINAL CODE TOLERANCE RATING Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. Examples: 102 = 1000 pF K = ± 10 % M = ± 20 % S T ### (2) MARKING PACKAGING PROCESS CODE T = 7" reel / X = Ni barrier U = 250 VAC S = marked 100 % matte tin (see Part Marking plastic tape plate finish table below) W = Ni barrier with flexible layer, 100 % matte tin plate finish (1) X1 = X1 / Y2 X2 = X2 Vishay automotive grade per customer request add “A”: X1A = X1 / Y2 X2A = X2 Notes • Detail ratings see “Selection Chart” (1) “W” flexible termination under qualification (2) Process code must be added to control products and requirements PART MARKING MARKING 1ST DIGIT MANUFACTURER VA 2ND DIGIT DIELECTRIC AND RATING A = X7R, X1 / Y2 - “X” termination option VM M = X7R, X2 - “X” termination option V = Vishay Revision: 06-Jul-2020 VB B = X7R, X1 / Y2 - “W” termination option VN N = X7R, X2 - “W” termination option Document Number: 45020 2 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Use This Link to Check Out the New Combined C0G (NP0) and X7R Datasheet VJ Safety Certified Capacitors X7R www.vishay.com Vishay Vitramon DIMENSIONS FOR “X” TERMINATION OPTION in inches (millimeters) W L T MAX. P TERMINATION (P) PART ORDERING NUMBER LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) MINIMUM MAXIMUM 2008 VJ2008 0.200 ± 0.010 (5.08 ± 0.25) 0.080 ± 0.010 (2.03 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) 2220 VJ2220 0.220 ± 0.008 (5.59 ± 0.20) 0.200 ± 0.010 (5.08 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) CASE CODE DIMENSIONS FOR “W” TERMINATION OPTION in inches (millimeters) W L T MAX. P TERMINATION (P) PART ORDERING NUMBER LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) MINIMUM MAXIMUM 2008 VJ2008 0.200 - 0.010 / + 0.020 (5.08 - 0.25 / + 0.50) 0.080 ± 0.010 (2.03 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) 2220 VJ2220 0.220 - 0.008 / + 0.018 (5.59 - 0.20 / + 0.45) 0.200 ± 0.010 (5.08 ± 0.25) 0.105 (2.65) 0.010 (0.25) 0.030 (0.76) CASE CODE Note • “W” flexible termination under qualification RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters B A r C CASE CODE A B C r (1) 2008 2.70 1.50 3.60 0.5 2220 5.80 1.50 4.20 0.5 Note (1) Radius optional Revision: 06-Jul-2020 Document Number: 45020 3 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Use This Link to Check Out the New Combined C0G (NP0) and X7R Datasheet VJ Safety Certified Capacitors X7R www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R (X1 / Y2) X7R (X2) VJ2008 (1) VJ2220 (1) VJ2008 (1) VJ2220 (1) CASE CODE 2008 2220 2008 2220 VOLTAGE (VAC) 250 250 250 250 U U U U STYLE VOLTAGE CODE CAP. CODE CAP. 100 10 pF 220 22 pF 330 33 pF 470 47 pF 560 56 pF 680 68 pF 820 82 pF 101 100 pF • • 121 120 pF • • 151 150 pF • • 181 180 pF • • 221 220 pF • • 271 270 pF • • • • 331 330 pF • • • • 391 390 pF • • • • 471 470 pF • • • • 561 560 pF • • • • 681 680 pF • • • • 821 820 pF • • • • 102 1.0 nF • • • • 122 1.2 nF • • • 152 1.5 nF • • • 182 1.8 nF • • • 222 2.2 nF • • • 272 2.7 nF • • • 332 3.3 nF • • 392 3.9 nF • • 472 4.7 nF • • 562 5.6 nF • 682 6.8 nF • 822 8.2 nF • 103 10 nF • 123 12 nF • 153 15 nF Note (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 Revision: 06-Jul-2020 Document Number: 45020 4 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Use This Link to Check Out the New Combined C0G (NP0) and X7R Datasheet VJ Safety Certified Capacitors X7R www.vishay.com PACKAGING QUANTITIES Vishay Vitramon (1) 7" REEL QUANTITIES CASE CODE TAPE SIZE PACKAGING CODE “T” 2008 12 mm 2000 2220 12 mm 1000 Note (1) Reference: EIA standard RS481 - “Taping of Surface Mount Components for Automatic Placement” APPROVALS VDE approval mark (update 2016-06-24): X1 / Y2-capacitor: 40037440 82 pF to 4700 pF 250 VAC X2-capacitor: 40037440 82 pF to 12 000 pF 250 VAC DIN EN 60384-14 (VDE 0565-1-1):2014-04; EN 60384-14:2013-08; IEC 60384-14 (ed.4) CSA / cCSAus approval mark (update 2020-05-05): X1 / Y2-capacitor: 70001064 82 pF to 4700 pF 250 V~ X2-capacitor: 70001064 82 pF to 12 000 pF 250 V~ CAN / CSA-E60384-14:14 and ANSI / UL 60384-14-2017 GENERAL CERTIFICATES # Quality management system according to ISO/IATF 16949 Yes # Quality management system according to ISO 9001 Yes # Environmental certification according to ISO 14001 Yes # Health and safety system according to OHSAS 18001 Yes STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to 40 °C ambient temperature and ≤ 70 % relative humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 06-Jul-2020 Document Number: 45020 5 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000