VJ2225A391KBBAT4X

VJ OMD Series www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitor Solutions for Boardflex Sensitive Applications FEATURES • Open Mode Design (OMD) reduces risk of shorts or leakage in board flex applications • Excellent reliability and thermal shock performance • Efficient low-power consumption, ripple current capable to 1.2 ARMS at 100 kHz • High voltage breakdown compared to standard design Available • 100 % voltage conditioning available up to 630 VDC rating (process code “5H”) Contact mlcc@vishay.com for higher voltages • Polymer termination available for intensive board flex requirements • Wet build process • Reliable Noble Metal Electrode (NME) system • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • • • • • • Demanding boardflex applications Input filter capacitors Output filter capacitors Snubber capacitors reduce MOSFET voltage spikes Filtering for switching power supplies For lighting and other AC applications please contact: mlcc@vishay.com ELECTRICAL SPECIFICATIONS C0G (NP0) X7R GENERAL SPECIFICATION GENERAL SPECIFICATION Note Electrical characteristics at +25 °C unless otherwise specified Note Electrical characteristics at +25 °C unless otherwise specified Operating Temperature: -55 °C to +125 °C Operating Temperature: -55 °C to +125 °C Capacitance Range: 10 pF to 47 nF Capacitance Range: 100 pF to 1.8 μF Voltage Range: 50 VDC to 3000 VDC Voltage Range: 16 VDC to 3000 VDC Temperature Coefficient of Capacitance (TCC): 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C Temperature Coefficient of Capacitance (TCC): ± 15 % from -55 °C to +125 °C, with 0 VDC applied Dissipation Factor (DF): 0.1 % maximum at 1.0 VRMS and 1 MHz for values ≤ 1000 pF 0.1 % maximum at 1.0 VRMS and 1 kHz for values > 1000 pF Dissipation Factor (DF): < 50 V ratings 3.5 % maximum at 1.0 VRMS and 1 kHz ≥ 50 V ratings 2.5 % maximum at 1.0 VRMS and 1 kHz Insulating Resistance: at +25 °C 100 000 MΩ min. or 1000 ΩF whichever is less at +125 °C 10 000 MΩ min. or 100 ΩF whichever is less Aging Rate: 0 % maximum per decade Dielectric Strength Test: performed per method 103 of EIA 198-2-E Applied test voltages ≤ 200 VDC-rated: 250 % of rated voltage 200 % of rated voltage 500 VDC-rated: 630 VDC / 1000 VDC-rated: 150 % of rated voltage 1500 VDC to 3000 VDC-rated: 120 % of rated voltage Revision: 29-Jan-2021 Insulating Resistance: at +25 °C 100 000 MΩ min. or 1000 ΩF whichever is less at +125 °C 10 000 MΩ min. or 100 ΩF whichever is less Aging Rate: 1 % maximum per decade Dielectric Strength Test: performed per method 103 of EIA 198-2-E Applied test voltages ≤ 250 VDC-rated: 250 % of rated voltage min. 150 % of rated voltage 500 VDC-rated: 630 VDC / 1000 VDC-rated: 150 % of rated voltage 1500 VDC to 3000 VDC-rated: 120 % of rated voltage Document Number: 45198 1 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ OMD Series www.vishay.com Vishay Vitramon QUICK REFERENCE DATA DIELECTRIC CASE MAXIMUM VOLTAGE (V) 1206 1210 1808 1812 1825 2220 2225 0805 1206 1210 1808 1812 1825 2220 2225 1500 2000 3000 3000 1000 1000 1000 630 2000 2000 3000 3000 2000 3000 2000 C0G (NP0) X7R CAPACITANCE MINIMUM 10 pF 10 pF 27 pF 27 pF 15 pF 270 pF 270 pF 470 pF 270 pF 390 pF 220 pF 100 pF 5.6 nF 1.0 nF 5.6 nF MAXIMUM 4.7 nF 8.2 nF 8.2 nF 18 nF 33 nF 39 nF 47 nF 220 nF 680 nF 1.0 μF 18 nF 1.2 μF 1.5 μF 1.8 μF 1.8 μF Note • Detail ratings see “Selection Chart” ORDERING INFORMATION VJ1210 Y 474 J X A A T # (2) CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE TERMINATION DC VOLTAGE RATING (1) MARKING PACKAGING PROCESS CODE 0805 1206 1210 1808 1812 1825 2220 2225 A = C0G (NP0) Y = X7R Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. An “R” indicates a decimal point. Examples 474 = 470 000 pF F=±1% G=±2% J=±5% K = ± 10 % M = ± 20 % Note C0G (NP0): F, G, J, K X7R: J, K, M X = Ni barrier 100 % tin plated matte finish E = AgPd (3) B = polymer 100 % tin plated matte finish (5) J = 16 V X = 25 V A = 50 V B = 100 V C = 200 V P = 250 V E = 500 V L = 630 V G = 1000 V R = 1500 V F = 2000 V H = 3000 V A= unmarked (4) C = 7" reel / paper tape T = 7" reel / plastic tape P = 11 1/4" / 13" reel / paper tape R = 11 1/4" / 13" reel / plastic tape O = 7" reel / flamed paper tape I = 11 1/4" / 13" reel / flamed paper tape Note “I” and “O” are used for “E” termination size 0805 4X = OMD cap 5H = OMD cap 100 % voltage conditioning Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance Consult for questions: mlcc@vishay.com (2) Process code with 2 digits has to be added (3) Termination code E” is for conductive epoxy assembly (4) Other termination options contact mlcc@vishay.com for availability (5) Polymer termination, code “B”, only available in plastic tape “T” / “R” ENVIRONMENTAL STATUS TERMINATION CODE X E B Revision: 29-Jan-2021 TERMINATION DESCRIPTION Ni barrier 100 % tin plated matte finish AgPd Polymer layer, 100 % tin plated matte finish RoHS COMPLIANT Yes Yes Yes VISHAY GREEN Yes Yes No Document Number: 45198 2 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ OMD Series www.vishay.com Vishay Vitramon DIMENSIONS in inches (millimeters) W L T MAX. P CASE CODE STYLE LENGTH (L) WIDTH (W) TERMINATION PAD (P) MAXIMUM THICKNESS (T) MINIMUM MAXIMUM 0805 VJ0805 0.079 ± 0.008 (2.00 ± 0.20) 0.049 ± 0.008 (1.25 ± 0.20) 0.057 (1.45) 0.010 (0.25) 0.030 (0.76) 1206 VJ1206 0.126 ± 0.010 (3.20 ± 0.25) 0.063 ± 0.010 (1.60 ± 0.25) 0.067 (1.70) (1) 0.010 (0.25) 0.030 (0.76) 1210 VJ1210 0.126 ± 0.010 (3.20 ± 0.25) 0.098 ± 0.010 (2.50 ± 0.25) 0.067 (1.70) 0.010 (0.25) 0.030 (0.76) 1808 VJ1808 0.180 ± 0.012 (4.57 ± 0.30) 0.080 ± 0.010 (2.03 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.035 (0.90) 1812 VJ1812 0.177 ± 0.012 (4.50 ± 0.30) 0.126 ± 0.008 (3.20 ± 0.20) 0.086 (2.18) 0.010 (0.25) 0.035 (0.90) 1825 VJ1825 0.177 ± 0.012 (4.50 ± 0.30) 0.252 ± 0.010 (6.40 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.035 (0.90) 2220 VJ2220 0.220 ± 0.010 (5.59 ± 0.25) 0.200 ± 0.010 (5.08 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.037 (0.95) 2225 VJ2225 0.220 ± 0.010 (5.59 ± 0.25) 0.250 ± 0.010 (6.35 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.037 (0.95) Notes • Polymer (B-termination) have increased dimensions: length 0.006" (0.15 mm) (1) Maximum thickness (T) = 0.067 (1.71) for VJ1206Y104* Revision: 29-Jan-2021 Document Number: 45198 3 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ OMD Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC STYLE CASE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE CAP. 100 10 pF 120 12 pF 150 15 pF 180 18 pF 220 22 pF 270 27 pF 330 33 pF 390 39 pF 470 47 pF 560 56 pF 680 68 pF 820 82 pF 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1.0 nF 122 1.2 nF 152 1.5 nF 182 1.8 nF 222 2.2 nF 272 2.7 nF 332 3.3 nF 392 3.9 nF 472 4.7 nF 562 5.6 nF 682 6.8 nF 822 8.2 nF 103 10 nF 123 12 nF 153 15 nF 183 18 nF 223 22 nF 273 27 nF 333 33 nF 393 39 nF 473 47 nF 563 56 nF 683 68 nF 823 82 nF 104 100 nF C0G (NP0) VJ1206 (1) VJ1210 (1) VJ1808 (1) 1206 1210 1808 50 100 200 500 630 1000 1500 50 100 200 500 630 1000 1500 2000 50 100 200 500 630 1000 1500 2000 3000 A B C E L G R A B C E L G R F A B C E L G R F H • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Notes RoHS-compliant (1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034 Revision: 29-Jan-2021 Document Number: 45198 4 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ OMD Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC STYLE CASE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE CAP. 100 10 pF 120 12 pF 150 15 pF 180 18 pF 220 22 pF 270 27 pF 330 33 pF 390 39 pF 470 47 pF 560 56 pF 680 68 pF 820 82 pF 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1.0 nF 122 1.2 nF 152 1.5 nF 182 1.8 nF 222 2.2 nF 272 2.7 nF 332 3.3 nF 392 3.9 nF 472 4.7 nF 562 5.6 nF 682 6.8 nF 822 8.2 nF 103 10 nF 123 12 nF 153 15 nF 183 18 nF 223 22 nF 273 27 nF 333 33 nF 393 39 nF 473 47 nF 563 56 nF 683 68 nF 823 82 nF 104 100 nF C0G (NP0) 50 A • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 100 B • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 200 C • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • VJ1812 (1) 1812 500 630 1000 E L G • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 1500 R • • • • • • • • • • • • • • • • • • 2000 F • • • • • • • • • • • • • • • • • • 3000 H • • • • • • • • • • • • • • 50 A • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 100 B • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • VJ1825 (1) 1825 200 500 C E • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 630 L 1000 G • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Notes RoHS-compliant (1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034 Revision: 29-Jan-2021 Document Number: 45198 5 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ OMD Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC STYLE CASE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 C0G (NP0) CAP. 10 pF 12 pF 15 pF 18 pF 22 pF 27 pF 33 pF 39 pF 47 pF 56 pF 68 pF 82 pF 100 pF 120 pF 150 pF 180 pF 220 pF 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF 820 pF 1.0 nF 1.2 nF 1.5 nF 1.8 nF 2.2 nF 2.7 nF 3.3 nF 3.9 nF 4.7 nF 5.6 nF 6.8 nF 8.2 nF 10 nF 12 nF 15 nF 18 nF 22 nF 27 nF 33 nF 39 nF 47 nF 56 nF 68 nF 82 nF 100 nF 50 A 100 B • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • VJ2220 (1) 2220 200 500 C E • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 630 L 1000 G 50 A 100 B • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • VJ2225 (1) 2225 200 500 C E • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 630 L 1000 G • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Notes RoHS-compliant (1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034 Revision: 29-Jan-2021 Document Number: 45198 6 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ OMD Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE VJ0805 (1) CASE CODE 0805 16 25 50 100 200 500 630 16 25 50 100 VOLTAGE (VDC) VOLTAGE CODE J X A B C E L J X A B CAP. CODE CAP. 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF • • • • 331 330 pF • • • • 391 390 pF • • • • 471 470 pF •• •• •• •• •• • • • • • • 561 560 pF •• •• •• •• •• • • • • • • 681 680 pF •• •• •• •• •• • • • • • • 821 820 pF •• •• •• •• •• • • • • • • 102 1.0 nF •• •• •• •• •• • • • • • • 122 1.2 nF •• •• •• •• •• • • • • • • 152 1.5 nF •• •• •• •• •• • • • • • • 182 1.8 nF •• •• •• •• •• • • • • • • 222 2.2 nF •• •• •• •• •• • • • • • • 272 2.7 nF •• •• •• •• •• • • • • • • 332 3.3 nF •• •• •• •• •• • • • • • • 392 3.9 nF •• •• •• •• •• • • • • • • 472 4.7 nF •• •• •• •• •• • • • • • • 562 5.6 nF •• •• •• •• • • • • • 682 6.8 nF •• •• •• •• • • • • • 822 8.2 nF •• •• •• •• • • • • • 103 10 nF •• •• •• •• • • • • • 123 12 nF •• •• •• • • • • • • 153 15 nF •• •• •• • • • • • • 183 18 nF •• •• •• • • • • • • 223 22 nF •• •• •• • • • • • • 273 27 nF • • • • • • • • 333 33 nF • • • • • • • • 393 39 nF • • • • • • • • 473 47 nF • • • • • • • • 563 56 nF • • • • • • • 683 68 nF • • • • • • • 823 82 nF • • • • • • • 104 100 nF • • • • • • • 124 120 nF • • • • • • 154 150 nF • • • • • • 184 180 nF • • • • • 224 220 nF • • • • 274 270 nF • • • 334 330 nF • • • 394 390 nF • • 474 470 nF • • 564 560 nF • 684 680 nF • 824 820 nF 105 1.0 μF 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF Notes RoHS-compliant •• Paper tape • Plastic tape (1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034 Revision: 29-Jan-2021 VJ1206 (1) 1206 200 500 C E • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 630 L • • • • • • • • • • • • • • • • • • • • • • • 1000 1500 2000 G R F • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Document Number: 45198 7 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ OMD Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE VJ1210 (1) CASE CODE 1210 16 25 50 100 200 500 630 1000 1500 VOLTAGE (VDC) VOLTAGE CODE J X A B C E L G R CAP. CODE CAP. 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF • • 471 470 pF • • 561 560 pF • • 681 680 pF • • 821 820 pF • • 102 1.0 nF • • 122 1.2 nF • • 152 1.5 nF • • 182 1.8 nF • • 222 2.2 nF • • 272 2.7 nF • • 332 3.3 nF • • 392 3.9 nF • • 472 4.7 nF • • 562 5.6 nF • 682 6.8 nF • 822 8.2 nF 103 10 nF • • • • • • • • 123 12 nF • • • • • • • 153 15 nF • • • • • • • 183 18 nF • • • • • • • 223 22 nF • • • • • • • 273 27 nF • • • • • • • 333 33 nF • • • • • • • 393 39 nF • • • • • • • 473 47 nF • • • • • 563 56 nF • • • • • 683 68 nF • • • • • 823 82 nF • • • • • 104 100 nF • • • • • 124 120 nF • • • • • 154 150 nF • • • • • 184 180 nF • • • • 224 220 nF • • • • 274 270 nF • • • • 334 330 nF • • • • 394 390 nF • • • • 474 470 nF • • • • 564 560 nF • • • 684 680 nF • • • 824 820 nF • • 105 1.0 μF • 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF Notes RoHS-compliant (1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034 Revision: 29-Jan-2021 2000 F • • • • • • • • • • • • 630 L • • • • • • • • • • • • • • • • • • • • VJ1808 (1) 1808 1000 1500 2000 G R F • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3000 H • • • • • • • • • • • Document Number: 45198 8 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ OMD Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE VJ1812 (1) CASE CODE 1812 50 100 200 250 500 630 1000 1500 2000 3000 100 VOLTAGE (VDC) VOLTAGE CODE A B C P E L G R F H B CAP. CODE CAP. 101 100 pF • • • • • 121 120 pF • • • • • 151 150 pF • • • • • 181 180 pF • • • • • 221 220 pF • • • • • 271 270 pF • • • • • • 331 330 pF • • • • • • 391 390 pF • • • • • • • • • • 471 470 pF • • • • • • • • • • 561 560 pF • • • • • • • • • • 681 680 pF • • • • • • • • • • 821 820 pF • • • • • • • • • • 102 1.0 nF • • • • • • • • • • 122 1.2 nF • • • • • • • • • • 152 1.5 nF • • • • • • • • • • 182 1.8 nF • • • • • • • • • • 222 2.2 nF • • • • • • • • • • 272 2.7 nF • • • • • • • • • 332 3.3 nF • • • • • • • • • 392 3.9 nF • • • • • • • • • 472 4.7 nF • • • • • • • • • 562 5.6 nF • • • • • • • • • 682 6.8 nF • • • • • • • • • 822 8.2 nF • • • • • • • • 103 10 nF • • • • • • • • • 123 12 nF • • • • • • • • 153 15 nF • • • • • • • • 183 18 nF • • • • • • • • 203 20 nF • • • • • • • • 223 22 nF • • • • • • • • 273 27 nF • • • • • • • • 333 33 nF • • • • • • • 393 39 nF • • • • • • • 473 47 nF • • • • • • • 563 56 nF • • • • • • • 683 68 nF • • • • • • • 823 82 nF • • • • • • • 104 100 nF • • • • • • • 124 120 nF • • • • • • 154 150 nF • • • • • • 184 180 nF • • • • • 224 220 nF • • • • • 274 270 nF • • • • • 334 330 nF • • • • • 394 390 nF • • • • 474 470 nF • • • 564 560 nF • • • 684 680 nF • • • 824 820 nF • • • 105 1.0 μF • • • 125 1.2 μF • • 155 1.5 μF • 185 1.8 μF 225 2.2 μF Notes RoHS-compliant (1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034 Revision: 29-Jan-2021 200 C • • • • • • • • • • • • • • • • • • • • • • • • VJ1825 (1) 1825 500 630 1000 1500 2000 E L G R F • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Document Number: 45198 9 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ OMD Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE VJ2220 (1) CASE CODE 2220 50 100 200 250 500 630 1000 2000 3000 100 VOLTAGE (VDC) VOLTAGE CODE A B C P E L G F H B CAP. CODE CAP. 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1.0 nF • 122 1.2 nF • 152 1.5 nF • 182 1.8 nF • 222 2.2 nF • 272 2.7 nF 332 3.3 nF 392 3.9 nF 472 4.7 nF 562 5.6 nF • 682 6.8 nF • 822 8.2 nF • 103 10 nF • • • • • • • • • 123 12 nF • • • • • • • • • 153 15 nF • • • • • • • • • 183 18 nF • • • • • • • • • 203 20 nF • • • • • • • • • 223 22 nF • • • • • • • • • 273 27 nF • • • • • • • • • 333 33 nF • • • • • • • • 393 39 nF • • • • • • • • 473 47 nF • • • • • • • • 563 56 nF • • • • • • • • 683 68 nF • • • • • • • • 823 82 nF • • • • • • • • 104 100 nF • • • • • • • 124 120 nF • • • • • • • 154 150 nF • • • • • • • 184 180 nF • • • • • • • 224 220 nF • • • • • • 274 270 nF • • • • • 334 330 nF • • • • • 394 390 nF • • • • • 474 470 nF • • • • • 564 560 nF • • • • • 684 680 nF • • • • • 824 820 nF • • • 105 1.0 μF • • • 125 1.2 μF • • • 155 1.5 μF • • • 185 1.8 μF • • 225 2.2 μF Notes RoHS-compliant (1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034 Revision: 29-Jan-2021 200 C • • • • • • • • • • • • • • • • • • • • • • • • • • • VJ2225 (1) 2225 500 630 1000 1500 2000 E L G R F • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Document Number: 45198 10 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ OMD Series www.vishay.com Vishay Vitramon C0G (NP0) CAPACITORS - TYPICAL PARAMETERS TEMPERATURE COEFFICIENT OF CAPACITANCE MIN. INSULATION RESISTANCE VS. TEMPERATURE 10 000 INSULATION RESISTANCE (F) % CAPACITANCE CHANGE 2.0 1.5 1.0 1000 0.5 0.0 NP0 -0.5 -1.0 -1.5 100 10 -2.0 -75 -50 -25 0 25 50 75 10 100 125 100 125 TEMPERATURE °C TEMPERATURE °C AGING RATE VOLTAGE COEFFICIENT OF CAPACITANCE 0.2 30 % CAPACITANCE CHANGE % CAPACITANCE CHANGE 25 0.1 0.0 -0.1 -0.2 20 10 0 -10 -20 -30 1 10 100 HOURS Revision: 29-Jan-2021 1000 10 000 0 100 200 300 400 500 600 700 800 900 1000 DC VOLTS APPLIED Document Number: 45198 11 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ OMD Series www.vishay.com Vishay Vitramon X7R DIELECTRIC - TYPICAL PARAMETERS RATED VOLTAGE VS. TEMPERATURE DISSIPATION FACTOR VS. TEMPERATURE % DISSIPATION FACTOR % RATED VOLTAGE 200 150 100 50 0 -75 -50 -25 0 25 50 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 X5R X7R 75 100 125 150 175 180 -75 -50 -25 TEMPERATURE °C 0 25 50 75 100 125 150 175 TEMPERATURE °C DISSIPATION FACTOR VS. VOLTAGE VOLTAGE COEFFICIENT OF CAPACITANCE 0.020 10 DISSIPATION FACTOR % CAPACITANCE CHANGE 0 -10 -20 -30 -40 -50 2000 V rated -60 630 V / 1000 V / 1500 V rated 0.016 0.012 0.008 200 V -70 -80 0 500 1000 1500 2000 2500 0 IMPEDANCE VS. FREQUENCY 500 V / 630 V 200 300 400 500 600 700 UN/V- IMPEDANCE VS. FREQUENCY 2000 V 1000 1000 IMPEDANCE () 100 10 1 100 DC VOLTS APPLIED DC VOLTS APPLIED IMPEDANCE (Ω) 500 V / 630 V 0.000 1 µF 0.1 µF 0.01 µF 4.7 nF 2.2 nF 1 nF 0.1 0.1 1 FREQUENCY (MHz) Revision: 29-Jan-2021 10 1 0.1 0.01 0.01 100 10 100 1 10 100 1000 FREQUENCY (MHz) Document Number: 45198 12 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ OMD Series www.vishay.com Vishay Vitramon X7R DIELECTRIC - TYPICAL PARAMETERS VOLTAGE COEFFICIENT OF CAPACITANCE HIGHER CAPACITANCE 10 10 0 0 % CAPACITANCE CHANGE % CAPACITANCE CHANGE VOLTAGE COEFFICIENT OF CAPACITANCE LOWER CAPACITANCE -10 -20 -30 -40 -50 Case size 1206 1210 1808 1812 -60 -70 Range 100 pF to 4700 pF 390 pF to 10 000 pF 470 pF to 18 000 pF 1000 pF to 27 000 pF Case size 1206 1210 1812 -10 -20 Range 5600 pF to 18 000 pF 12 000 pF to 39 000 pF 33 000 pF to 100 000 pF -30 -40 -50 -60 -70 -80 -80 -90 0 100 200 300 500 400 600 0 700 100 200 300 400 500 600 700 DC VOLTS APPLIED DC VOLTS APPLIED VOLTAGE COEFFICIENT OF CAPACITANCE 10 % CAPACITANCE CHANGE 0 -10 -20 -30 -40 -50 2000 V rated -60 1000 V / 1500 V rated -70 -80 0 500 1000 1500 2000 2500 DC VOLTS APPLIED Revision: 29-Jan-2021 Document Number: 45198 13 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ OMD Series www.vishay.com Vishay Vitramon BOARDFLEX SENSITIVE APPLICATIONS - SOLUTION A predominant failure mode in multilayer ceramic chip capacitors is cracking caused by board flexure. Cracks can then create a path for current to pass from one electrode through the dielectric to an opposing electrode or from the terminations at one end of the MLCC through the dielectric to an opposing electrode. This may subsequently result in capacitance loss, leakage low Insulation Resistance (IR) - and / or more seriously, high current shorts. A short circuit condition in the surface mounted capacitors can cause further failures of downstream components. Vishay’s Open Mode Design Capacitors (VJ OMD - Cap. series) reduce the risk of these destructive conditions through MLCC designs that prevent board flexure cracks reaching the opposing electrode. VJ OMD - Cap. MLCCs reduce the risk of early field failures associated with board flex cracks. However, it is important to note that even in the open mode designs the presence of flexure related cracks can cause capacitance loss leading to localized stresses on the parts. eventually, depending on the application environment, including such factors and high voltage pulse frequency and thermal cycling this may lead to internal breakdown of the component. POLYMER TERMINATION Polymer termination provides additional protection against board flexure damage by absorbing greater mechanical and thermal stresses. Components can be packaged, transported, stored and handled the same standard terminated product. Wave and reflow soldering of MLCC does not require modification to equipment and / or process. Polymer termination greatly reduces the risk of mechanical cracking however it does not completely eliminate. STANDARD TERMINATION OMD CAP PLUS POLYMER TERMINATION Exposed Electrodes = Electrical Short No Exposed Electrodes = No Electrical Short STANDARD PACKAGING QUANTITIES (1)(2)(3) CASE CODE TAPE SIZE 7" REEL QUANTITIES 11 1/4" AND 13" REEL QUANTITIES PAPER TAPE PACKAGING PLASTIC TAPE PAPER TAPE PLASTIC TAPE CODE “C” / “O” PACKAGING CODE “T” PACKAGING CODE “P” / “I” PACKAGING CODE “R” 3000 3000 10 000 10 000 n/a 2500 / 3000 n/a 9000 / 10 000 n/a 2000 / 2500 / 3000 n/a 9000 / 10 000 n/a 2000 n/a 10 000 n/a 1000 n/a 4000 n/a 1000 n/a 4000 n/a 1000 n/a n/a n/a 500 n/a n/a 0805 (4)(5) 8 mm 1206 (4) 8 mm 1210 (4) 8 mm 1808 (4) 12 mm 1812 (4) 12 mm 1825 12 mm 2220 12 mm 2225 12 mm Notes (1) Vishay Vitramon uses embossed plastic, and punch paper carrier tapes. Paper tape is not available for case sizes ≥ 1206 or for component thickness > 0.035" (0.89 mm) (2) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” (3) n/a = not available (4) Packaging code “C” / “O”, “P / I” and lower quantities can depend from product thickness (5) Polymer termination, code “B”, only available in plastic tape “T” / “R” STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to 40 °C ambient temperature and ≤ 70 % relative humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 29-Jan-2021 Document Number: 45198 14 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 09-Jul-2021 1 Document Number: 91000