VJ5601M868MXBEK

End of Life – Last Available Purchase Date: 20-Aug-2017 VJ5601M868MXBSR www.vishay.com Vishay Vitramon Surface Mount Ceramic Chip Antennas for 868 MHz FEATURES • Small outline (15.5 mm x 10.5 mm x 1.2 mm) • 50 : unbalanced tuning interface (max. 1.73 dBi gain (1)) • Assembled onto a PCB in the standard reflow process • 140 MHz half-power tuned bandwidth (800 to 940 MHz) • High-reliability ceramic-oxide body construction • Low-RF loss, high-Q ceramic • Lead (Pb)-free / wet build process VJ5601M868MXBSR chip antenna product • Reliable Noble Metal Electrode (NME) system Vishay VJ5601M868MXBSR chip antennas are covered by one or more of the following patents: WO2008250262 (A1), US2008303720 (A1), US2008305750 (A1), WO2008154173 (A1) Other patents are pending. DESCRIPTION • Wide operating temperature range (-40 °C to +85 °C) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note (1) See figures 1 through 6 for more details on the radiation pattern (antenna gain) at 868 MHz; the PCB board ground is shorted to earth ground for tuning. The VJ5601M868MXBSR ceramic chip antenna is a small form-factor, high-performance, chip-antenna designed for operation at 868 MHz. It allows manufacturers to design high quality products that do not bear the penalty of a large external antenna, and is designed to be assembled onto a PC board using a standard reflow process. APPLICATIONS The VJ5601M868 is the latest in a family of products developed by Vishay, a world leader in manufacturing of discrete and passive components. • Long range RFID The VJ5601M868 series are small form-factor, high-performance chip-antennas optimized for medical, remote sensing, industrial, security, and RFID applications. Operating temperature: -40 °C to +85 °C Utilizing unique Vishay materials and manufacturing technologies, these products when properly tuned also comply with the MBRAI standard for portable communication. • Medical telemetry (internal/external) • Remote sensing and control • Industrial automation and telemetry • Security systems, home automation ELECTRICAL SPECIFICATIONS Frequency range (transmission/reception): 800 MHz to 940 MHz Note • Electrical characteristics at +25 °C unless otherwise specified. Antenna performance is measured at 868 MHz and 50 : impedance unless otherwise specified. The best results are obtained by mounting the chip following the layout guidelines application note for the evaluation kit. QUICK REFERENCE DATA SERIES VJ5601M868MXBSR FREQUENCY (MHz) MAX. GAIN (dBi) AVERAGE GAIN (dBi) BANDWIDTH (-10 dB) (MHz) BANDWIDTH (-3 dB) (MHz) 868 3.2 0.2 38 140 CHIP ANTENNA PERFORMANCE -3 dB -10 dB 868 868 MHz REFLECTED 868 MHZ -3 dB -10 dB BANDWIDTH BANDWIDTH NOMINAL NOMINAL MHz POWER REFLECTED REFLECTED AVERAGE 800 MHz to 849 MHz to REFLECTED FREQUENCY IMPEDANCE PEAK COEFFICIENT POWER POWER POWER GAIN 940 MHz 887 MHz GAIN (MHz) (:) S11 LOSS LOSS LOSS (dBi) (dBi) (MHz) (MHz) 868 50 Revision: 07-Mar-17 0.2 3.2 < -22 dB 0.6 % 0.6 % < 0.03 dB 140 50 % 3 dB 38 10 % 0.46 dB Document Number: 45209 1 For technical questions, contact: chipantenna@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life – Last Available Purchase Date: 20-Aug-2017 VJ5601M868MXBSR www.vishay.com Vishay Vitramon VJ5601M868MXBSR TUNING Final tuning configuration and component values for L1, L2, and C1 depend on customer PCB layout. Optimal tuning is possible with just a few standard components. The nominal values shown are for a tuned VJ5601M868MXBEK kit. 90° 105° 2 120° -8 135° 150° 75° 60° 45° 30° -18 165° -28 15° 180° -38 dBi 0° -165° Pole rotaon ϕ° -15° -150° -30° -135° -120° -105° -45° -60° -75° -90° Rotaon plane / Horizontal E-field polarizaon XY / ϕ Fig. 4 - VJ5601M868MXBSR XY Radiation Pattern 90° 105° 4 120° -6 135° Fig. 1 - Tuning Example with Inductors L1, L2 and Capacitor C1 150° Power Reflection S11 (dB) Versus Frequency Power Reflection S11 dB (50 Ω) 0 800 828 -5 856 884 912 940 MHz 75° 60° 45° 30° -16 165° -26 15° 180° -36 dBi 0° -165° Pole rotaon ϕ° -15° -150° VJ5601M868 -30° -135° -120° -105° -10 -45° -60° -75° -90° Rotaon plane / Horizontal E-field polarizaon -15 > 99 % Power coupling at 868-MHz -20 -25 dB YZ / ϕ Fig. 5 - VJ5601M868MXBSR YZ Radiation Pattern Frequency (MHz) 105° 4 120° -6 135° Fig. 2 - VJ5601M868 Tuned to 868 MHz with > 99 % Power Coupled 150° Rotation Plane XY YZ XZ φ = 0° Receiver Direction Y-axis Z-axis Z-axis The radiaon paerns reference the elevaon θ that is perpendicular to the azimuth pole rotaon in ϕ. Fig. 3 - VJ5601M868 PCB Mounting and Coordinate Directions 75° 60° 45° 30° -16 165° -26 15° 180° -36 dBi Pole rotaon ϕ° 0° -165° -150° -135° -120° -105° -15° -30° -45° -60° -75° -90° Rotaon plane / Vercal E-field polarizaon XZ / θ Fig. 6 - VJ5601M868MXBSR XZ Radiation Pattern Revision: 07-Mar-17 Document Number: 45209 2 For technical questions, contact: chipantenna@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life – Last Available Purchase Date: 20-Aug-2017 VJ5601M868MXBSR www.vishay.com Vishay Vitramon FOOTPRINT, MECHANICAL AND PCB DIMENSIONS The antenna footprint and mechanical dimensions are presented in Figure 7. Optimal tuning is adjusted according to PCB layout. • The glue dot should not overlap with any of the soldering pads For additional mechanical support, it is recommended to add one drop of heat curing epoxy glue. • The glue dot area secures the chip firmly to the PCB • Apply the glue dot at the center of the antenna. Fig. 7 - Footprint, Chip Antenna Mechanical Dimensions, and PCB Layout Dimensions of VJ5601M868 300 T (°C) Max. temperature 250 300 T (°C) 250 10 s 260 °C ˜ 245 °C > 215 °C: 20 s to 40 s 215 °C 200 200 180 °C 150 150 Sn-Pb eutectic solder paste 40 s 130 °C Min. temperature 100 10 s 100 2 K/s 50 50 0 30 s to 60 s 30 s to 60 s 30 s to 60 s Fig. 8 - Soldering IR Reflow with SnPb Solder Revision: 07-Mar-17 Time 0 50 100 150 200 t (s) 250 Fig. 9 - Soldering Reflow with Sn Solder Document Number: 45209 3 For technical questions, contact: chipantenna@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life – Last Available Purchase Date: 20-Aug-2017 VJ5601M868MXBSR www.vishay.com Vishay Vitramon VJ5601M868 ASSEMBLY GUIDELINES 1. Mounting of antennas on a printed circuit board should be done by reflow soldering using the profiles shown (Figures 8, 9, and 10) 2. In order to provide the adequate strength between the antenna and the PCB apply of a dot of heat cured epoxy glue in the center of the footprint of the antenna prior to soldering the antenna to the board. An example for such glue is Heraeus PD 860002 SA. The weight of the dot should be 5 mg to 10 mg. 300 T (°C) 250 200 Max. temperature Sn-Ag-Cu solder paste 150 Min. temperature 100 50 0 30 s to 60 s 60 s to 120 s 60 s to 120 s Time 60 s to 120 s Fig. 10 - Soldering IR Reflow with SnAgCu Solder ORDERING INFORMATION VISHAY MATERIAL PACKAGING QUANTITY VJ5601M868 Chip Antenna VJ5601M868MXBSR 1000 pieces VJ5601M868 Evaluation Kit (1) VJ5601M868MXBEK 1 kit Note The VJ5601M868 kit is available for evaluation. For samples, please contact mlcc-samples@vishay.com. (1) Revision: 07-Mar-17 Document Number: 45209 4 For technical questions, contact: chipantenna@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000