VLMA3100-GS18

VLMA3100, VLMA3101 www.vishay.com Vishay Semiconductors Low Current SMD LED PLCC-2 FEATURES • SMD LED with exceptional brightness • Compatible equipment with automatic placement • EIA and ICE standard package • Compatible with infrared, vapor phase and wave solder processes according to CECC • Available in 8 mm tape • Low profile package • Non-diffused lens: excellent for coupling to light pipes and backlighting 19225 • Very low power consumption DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMA310x is the PLCC-2 (equivalent to a size B tantalum capacitor). • Luminous intensity IVmax./IVmin. ≤ 2.0 ratio in one packaging unit • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. APPLICATIONS PRODUCT GROUP AND PACKAGE DATA • Indicator and backlight for audio and video equipment • Product group: LED • Indicator and backlight for battery driven equipment • Package: SMD PLCC-2 • Small indicator for outdoor applications • Product series: low current • Indicator and backlight in office equipment • Angle of half intensity: ± 60° • Flat backlight for LCDs, switches, and symbols • Telecommunication: telephone and fax indicator and backlighting in • General use PARTS TABLE PART COLOR LUMINOUS INTENSITY WAVELENGTH (mcd) (nm) at IF at IF (mA) (mA) MAX MIN. TYP. MAX. MIN. TYP. . VLMA3100-GS08 Yellow 0.28 1.0 VLMA3100-GS18 Yellow 0.28 VLMA3101-GS08 Yellow 0.56 VLMA3101-GS18 Yellow 0.56 Rev. 1.5, 20-Apr-2022 FORWARD VOLTAGE (V) at IF TECHNOLOGY (mA) MIN. TYP. MAX. - 2 581 588 594 2 - 2.2 2.9 2 GaAsP on GaP 1.0 - 2 581 588 594 2 - 2.2 2.9 2 GaAsP on GaP - 1.4 2 581 588 594 2 - 2.2 2.9 2 GaAsP on GaP - 1.4 2 581 588 594 2 - 2.2 2.9 2 GaAsP on GaP Document Number: 81709 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMA3100, VLMA3101 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMA3100, VLMA3101 PARAMETER TEST CONDITION SYMBOL VALUE VR 6 V Tamb ≤ 90 °C IF 7 mA tp ≤ 10 μs IFSM 0.34 A PV 20 mW Reverse voltage (1) DC forward current Surge forward current Power dissipation Junction temperature UNIT Tj 100 °C Operating temperature range Tamb -40 to +100 °C Storage temperature range Tstg -40 to +100 °C Tsd 260 °C RthJA 500 K/W t≤5s Soldering temperature Thermal resistance junction-to-ambient Mounted on PC board (pad size > 16 mm2) Note (1) Driving the LED in reverse direction is suitable for short term application OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMA3100, VLMA3101, YELLOW PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. VLMA3100 IV 0.28 1.0 - UNIT mcd VLMA3101 IV 0.56 - 1.4 mcd Luminous intensity (1) IF = 2 mA Dominant wavelength IF = 2 mA λd 581 588 594 nm Peak wavelength IF = 2 mA λp - 585 - nm Angle of half intensity IF = 2 mA ϕ - ± 60 - ° Forward voltage IF = 2 mA VF - 2.2 2.9 V IR = 10 μA VR 6 20 - V VR = 0 V, f = 1 MHz Cj - 50 - pF Reverse voltage Junction capacitance Note (1) In one packing unit I Vmax./IVmin. ≤ 2.0 LUMINOUS INTENSITY CLASSIFICATION GROUP COLOR CLASSIFICATION LUMINOUS INTENSITY (mcd) YELLOW MIN. MAX. C1 0.28 0.36 MIN. MAX. C2 0.36 0.45 1 581 584 D1 0.45 0.56 2 583 586 D2 0.56 0.71 3 585 588 E1 0.71 0.90 4 587 590 E2 0.90 1.12 5 589 592 F1 1.12 1.40 6 591 594 F2 1.40 1.80 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above Type Numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, singe wavelength groups will not be orderable Rev. 1.5, 20-Apr-2022 GROUP DOMINANT WAVELENGTH (nm) Note • Wavelengths are tested at a current pulse duration of 25 ms Document Number: 81709 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMA3100, VLMA3101 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Axis Title 100 6 4 2 0 0 20 40 60 80 10000 1000 Yellow 10 100 1 100 10 1.0 1.5 Tamb - Ambient Temperature (°C) 95 10842 1st line 2nd line 8 2nd line IF - Forward Current (mA) IF - Forward Current (mA) 10 2.0 2.5 3.0 3.5 VF - Forward Voltage (V) 2nd line Fig. 4 - Forward Current vs. Forward Voltage Fig. 1 - Forward Current vs. Ambient Temperature Axis Title 10° 20° 1000 10000 0.9 50° 0.8 60° 70° 0.7 80° 0.6 0.4 0.2 100 1000 Yellow 10 100 1 0.1 10 1 0 10 100 IF - Forward Current (mA) 2nd line 95 10319 Fig. 5 - Relative Luminous Intensity vs. Forward Current Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Axis Title Axis Title 1.0 10000 2.5 10000 0.7 1000 1st line 2nd line 0.6 0.5 0.4 100 0.3 0.2 0.1 10 0 520 540 560 580 600 620 640 660 680 700 720 2.0 1000 1.5 1st line 2nd line Yellow 0.8 2nd line IVrel - Relative Luminous Intensity Yellow 0.9 2nd line Irel - Relative Intensity 1st line 2nd line 40° 1.0 2nd line IV rel - Relative Luminous Intensity 30° ϕ - Angular Displacement IV rel - Relative Luminous Intensity 0° 1.0 100 0.5 0 10 -40 -20 0 20 40 60 80 100 λ - Wavelengths (nm) 2nd line Tamb - Ambient Temperature (°C) 2nd line Fig. 3 - Relative Intensity vs. Wavelength Fig. 6 - Relative Luminous Intensity vs. Ambient Temperature Rev. 1.5, 20-Apr-2022 Document Number: 81709 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMA3100, VLMA3101 www.vishay.com Vishay Semiconductors Axis Title 10000 Yellow 1.05 1000 1st line 2nd line 2nd line VF,rel - Relative Forward Voltage (V) 1.10 1.00 100 0.95 0.90 10 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 2nd line Fig. 7 - Relative Forward Voltage vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters 0.9 1.75 ± 0.1 3.5 ± 0.2 0.8 technical drawings according to DIN specifications C A 2.2 2.8 ± 0.15 Pin identification Drawing-No.: 6.541-5067.01-4 Issue: 7; 12.03.14 Ø 2.4 3 + 0.15 Area covered with solderresist 4 2.6 (2.8) Recommended Footprint Mounting Pad Layout 1.2 1.6 (1.9) Rev. 1.5, 20-Apr-2022 4 Document Number: 81709 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMA3100, VLMA3101 www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM.3 - SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 10.4 8.4 120° 4.5 3.5 Adhesive tape 13.00 12.75 2.5 1.5 62.5 60.0 Identification Label: Vishay type group tape code production code quantity Blister tape Component cavity 14.4 max. 321 329 18857 Fig. 10 - Reel dimensions - GS18 94 8670 SOLDERING PROFILE TAPING OF VLM.3... 3.5 3.1 IR Reflow Soldering Profile for Lead (Pb)-free Soldering 2.2 2.0 Preconditioning acc. to JEDEC level 2a 300 5.75 5.25 8.3 7.7 1.85 1.65 1.6 1.4 4.1 3.9 Temperature (°C) 3.6 3.4 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 4.0 3.6 200 max. 30 s 150 max. 100 s max. 120 s 100 0.25 4.1 3.9 94 8668 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 2.05 1.95 0 0 Fig. 8 - Tape dimensions in mm for PLCC-2 50 100 150 Time (s) 200 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) TTW Soldering (according to CECC00802) Lead temperature 250 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 200 235 °C to 260 °C First wave 100 °C to 130 °C 100 100 2 K/s 50 180 178 Rev. 1.5, 20-Apr-2022 Forced cooling 10 0 94 8665 948626-1 Fig. 9 - Reel dimensions - GS08 ca. 5 K/s 0 14.4 max. 1000 ca. 2 K/s ca. 200 K/s 150 Full line: typical Dotted lines: process limits Second wave 1st line 2nd line 2.5 1.5 10000 5s 10.0 9.0 2nd line Temperature (°C) 4.5 3.5 300 Fig. 11 - Vishay Lead (Pb)-free Reflow Soldering Profile (according to J-STD-020C) 300 120° 250 max. 2 cycles allowed 19885-3 50 100 150 200 250 Time (s) Fig. 12 - Double Wave Soldering of Opto Devices (all packages) Document Number: 81709 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMA3100, VLMA3101 www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: A N B C D • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. E F G H I K L M After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: A. A.2D barcode B. Part No: Vishay part number 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. C. QTY: quantity D. SelCode: selection bin code E. Country of origin F. PTC: production plant code An EIA JEDEC® standard JESD22-A112 level 2a label is included on all dry bags. G. Termination finish H. Region code I. Serial#: serial number K. Batch Number: year, week, country code, plant code L. SL: storage location M. Environmental Symbols: RoHS, lead (Pb)-free, halogen free N. Lot numbers DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. Aluminum bag Label L E V E L CAUTION This bag contains MOISTURE –SENSITIVE DEVICES 2a 1. Shelf life in sealed bag 12 months at