VLMB40L1M2-34-GS08

Not for New Designs VLMB40L1M2-34 www.vishay.com Vishay Semiconductors Low Current SMD LED PLCC-2 FEATURES • High efficient InGaN technology • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 • Available in 8 mm tape reel 19225 • Preconditioning according to JEDEC® level 2a DESCRIPTION • ESD withstand voltage: up to 2 kV according to JESD22-A114-B This device has been designed to meet the increasing demand for blue SMD LED. • AEC-Q101 qualified The package of the VLMB40.. is the PLCC-2. • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled with clear epoxy. APPLICATIONS PRODUCT GROUP AND PACKAGE DATA • Telecommunication: telephone and fax • Automotive: backlighting in dashboards and switches • Product group: LED indicator and backlighting in • Backlighting for audio and video equipment • Package: SMD PLCC-2 • Backlighting in office equipment • Product series: low current • Indoor and outdoor message boards • Angle of half intensity: ± 60° • Flat backlight for LCDs, switches, and symbols • Illumination purposes, alternative to incandescent lamps • General use PARTS TABLE PART VLMB40L1M2-34-GS08 COLOR Blue LUMINOUS INTENSITY WAVELENGTH FORWARD VOLTAGE at IF at IF at IF (mcd) (nm) (V) TECHNOLOGY (mA) (mA) (mA) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. 11.2 23 28 2 462 468 472 2 - 3.2 4.2 20 InGaN on sapphire ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMB40.. PARAMETER DC forward current Surge forward current TEST CONDITION SYMBOL VALUE UNIT Tamb ≤ 80 °C IF 20 mA tp ≤ 10 μs IFSM 0.1 A PV 84 mW Power dissipation Junction temperature Tj 110 °C Tamb -40 to +100 °C Storage temperature range Tstg -40 to +100 °C Thermal resistance junction / ambient Mounted on PC board (pad size > 16 mm2) RthJA 360 K/W Operating temperature range Rev. 1.3, 20-Sep-2021 Document Number: 83293 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs VLMB40L1M2-34 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMB40.., BLUE TEST CONDITION PART SYMBOL MIN. TYP. MAX UNIT Luminous intensity PARAMETER IF = 2 mA VLMB40L1M2-34 IV 11.2 23 28 mcd Dominant wavelength IF = 2 mA λd 462 468 472 nm Peak wavelength IF = 2 mA λp - 464 - nm Angle of half intensity IF = 2 mA ϕ - ± 60 - ° Forward voltage IF = 20 mA VF - 3.2 4.2 V Temperature coefficient of VF IF = 10 mA TCVF - -3 - mV/K Temperature coefficient of IV IF = 10 mA TCIV - -0.4 - %/K Note • Not designed for reverse operation LUMINOUS INTENSITY CLASSIFICATION COLOR CLASSIFICATION LIGHT INTENSITY (mcd) GROUP BLUE OPTIONAL MIN. MAX. 1 11.2 14 MIN. MAX. 2 14 18 3 462 468 1 18 22.4 4 466 472 2 22.4 28 L M Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. These type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups are not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups are not be orderable. GROUP DOM. WAVELENGTH (nm) Note • Wavelengths are tested at a current pulse duration of 25 ms. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 0° 20 10 0 0 20913 20 40 60 80 100 Fig. 1 - Forward Current vs. Ambient Temperature Rev. 1.3, 20-Sep-2021 20° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 120 Tamb - Ambient Temperature (°C) 10° ϕ - Angular Displacement IV rel - Relative Luminous Intensity IF - Forward Current (mA) 30 80° 0.6 0.4 0.2 0 95 10319 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Document Number: 83293 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs VLMB40L1M2-34 www.vishay.com Vishay Semiconductors 1.50 IV rel - Relative Luminous Intensity IF - Forward Current (mA) 100 10 1 2.5 20519 3.0 3.5 4.0 0.75 0 10 20 30 40 50 60 70 80 90 Tamb - Ambient Temperature (°C) 20221 Fig. 3 - Forward Current vs. Forward Voltage Fig. 5 - Relative Luminous Intensity vs. Ambient Temperature 3.65 100 3.60 VF - Forward Voltage (V) IV rel - Relative Luminous Intensity 1.00 0.50 4.5 VF - Forward Voltage (V) 1.25 10 1 3.55 3.50 3.45 3.40 3.35 3.30 3.25 0.1 1 21996 10 100 IF - Forward Current (mA) Fig. 4 - Relative Luminous Intensity vs. Forward Current Rev. 1.3, 20-Sep-2021 0 20114 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) Fig. 6 - Forward Voltage vs. Ambient Temperature Document Number: 83293 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs VLMB40L1M2-34 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 0.9 1.75 ± 0.1 3.5 ± 0.2 0.8 A C technical drawings according to DIN specifications 2.2 2.8 ± 0.15 Pin identification Dimensions in mm Ø 2.4 3 + 0.15 area covered with solderresist Mounting Pad Layout 4 2.6 (2.8) 1.2 1.6 (1.9) 4 Dimensions: reflow and vapor phase (wave soldering) A Protection Diode C Rev. 1.3, 20-Sep-2021 20242 Document Number: 83293 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs VLMB40L1M2-34 www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM.3..., VLM.4...-SERIES) SOLDERING PROFILE Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. IR Reflow Soldering Profile for Lead (Pb)-free Soldering Preconditioning acc. to JEDEC level 3 300 Temperature (°C) Adhesive tape max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 200 max. 30 s 150 max. 100 s max. 120 s 100 Blister tape max. ramp down 6 °C/s max. ramp up 3 °C/s 50 0 0 50 100 150 Time (s) 200 Fig. 9 - Vishay Lead (Pb)-free Reflow Soldering Profile (acc. to J-STD-020) 94 8670 TAPING OF VLM.3..., VLM.4... TTW Soldering (according to CECC00802) 300 2.2 2.0 Lead temperature 4.0 3.6 8.3 7.7 1.85 1.65 4.1 3.9 2nd line Temperature (°C) 250 5.75 5.25 1.6 1.4 200 235 °C to 260 °C First wave 1000 ca. 2 K/s 100 °C to 130 °C 100 100 2 K/s 50 2.05 1.95 Full line: typical Dotted lines: process limits Second wave ca. 200 K/s 150 0.25 4.1 3.9 10000 5s 1st line 2nd line 3.5 3.1 3.6 3.4 300 max. 2 cycles allowed 19885-1 Component cavity 250 ca. 5 K/s Forced cooling 94 8668 0 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 2.5 1.5 948626-1 50 100 150 200 250 Time (s) Fig. 10 - Double Wave Soldering of Opto Devices (all Packages) 10.0 9.0 120° 4.5 3.5 10 0 Fig. 7 - Tape Dimensions in mm for PLCC-2 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 180 178 14.4 max. 94 8665 Fig. 8 - Reel Dimensions - GS08 Rev. 1.3, 20-Sep-2021 Document Number: 83293 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs VLMB40L1M2-34 www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 106 A RECOMMENDED METHOD OF STORAGE H VISHAY • Storage temperature 10 °C to 30 °C 37 • Storage humidity ≤ 60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering. B C D E F 20216 G A. Type of component B. Manufacturing plant C. SEL - selection code (bin): e.g.: R1 = code for luminous intensity group 5L = code for chrom. coordinate group In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. D. Date code year / week E. Day code (e.g. 4: Thursday) F. Batch no. G. Total quantity L E V E L CAUTION 2a H. Company code This bag contains MOISTURE –SENSITIVE DEVICES DRY PACKING 1. Shelf life in sealed bag 12 months at