VLMB41P2Q2-GS08

VLMB41.. www.vishay.com Vishay Semiconductors Standard SMD LED PLCC-2 FEATURES • High efficient InGaN technology • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 • Available in 8 mm tape reel • Preconditioning according to JEDEC® level 2 a 19225 DESCRIPTION • ESD withstand voltage: up to 2 kV according to JESD22-A114-B This device has been designed to meet the increasing demand for blue SMD LED. • AEC-Q101 qualified The package of the VLMB41.. is the PLCC-2. • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled with clear epoxy. APPLICATIONS PRODUCT GROUP AND PACKAGE DATA • Telecommunication: telephone and fax • Automotive: backlighting in dashboards and switches • Product group: LED indicator and backlighting in • Backlighting for audio and video equipment • Package: SMD PLCC-2 • Backlighting in office equipment • Product series: standard • Indoor and outdoor message boards • Angle of half intensity: ± 60° • Flat backlight for LCDs, switches, and symbols • Illumination purposes, alternative to incandescent lamps • General use PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) at IF (mA) MIN. TYP. MAX. WAVELENGTH (nm) FORWARD VOLTAGE (V) at IF (mA) MIN. TYP. MAX. at IF (mA) TECHNOLOGY MIN. TYP. MAX. VLMB41P1Q2-GS08 Blue 45 90 112 10 462 469 476 10 - 3.2 4.2 20 InGaN on Sapphire VLMB41P1Q2-GS18 Blue 45 90 112 10 462 469 476 10 - 3.2 4.2 20 InGaN on Sapphire VLMB41P2Q2-GS08 Blue 56 90 112 10 462 469 476 10 - 3.2 4.2 20 InGaN on Sapphire ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMB41.. PARAMETER DC forward current Surge forward current TEST CONDITION SYMBOL VALUE UNIT Tamb ≤ 80 °C IF 20 mA tp ≤ 10 μs IFSM 0.1 A PV 84 mW Power dissipation Junction temperature Operating temperature range Storage temperature range Thermal resistance junction to ambient Rev. 1.9, 05-Jul-2022 Mounted on PC board (pad size > 16 mm2) Tj 110 °C Tamb -40 to +100 °C Tstg -40 to +100 °C RthJA 360 K/W Document Number: 81641 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMB41.. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMB41.., BLUE PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX UNIT VLMB41P1Q2 IV 45 90 112 mcd VLMB41P2Q2 IV 56 90 112 mcd Luminous intensity IF = 10 mA Dominant wavelength IF = 10 mA λd 462 469 476 nm Peak wavelength IF = 10 mA λp - 464 - nm Angle of half intensity IF = 10 mA ϕ - ± 60 - ° Forward voltage IF = 20 mA VF - 3.2 4.2 V Temperature coefficient of VF IF = 10 mA TCVF - -3 - mV/K Temperature coefficient of IV IF = 10 mA TCIV - -0.4 - %/K Note • Not designed for reverse operation LUMINOUS INTENSITY CLASSIFICATION COLOR CLASSIFICATION LIGHT INTENSITY (mcd) GROUP BLUE OPTIONAL MIN. MAX. 1 45 56 MIN. MAX. 2 56 71 3 462 468 1 71 90 4 466 472 2 90 112 5 470 476 P Q Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. These type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups are not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups are not be orderable GROUP DOM. WAVELENGTH (nm) Note • Wavelengths are tested at a current pulse duration of 25 ms CROSSING TABLE VISHAY OSRAM VLMB41.. LBT67C TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 0° 20 10 0 0 20913 20 40 60 80 100 Fig. 1 - Forward Current vs. Ambient Temperature Rev. 1.9, 05-Jul-2022 20° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 120 Tamb - Ambient Temperature (°C) 10° ϕ - Angular Displacement IV rel - Relative Luminous Intensity IF - Forward Current (mA) 30 80° 0.6 0.4 0.2 0 95 10319 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Document Number: 81641 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMB41.. www.vishay.com Vishay Semiconductors 1.50 IV rel - Relative Luminous Intensity Relative Dominant Wavelength (nm) 1.010 1.005 1.000 0.995 1.25 1.00 0.75 0.50 0.990 1 10 IF - Forward Current (mA) 20518 0 100 Fig. 3 - Relative Dominant Wavelength vs. Forward Current 10 20 30 40 50 60 70 80 90 Tamb - Ambient Temperature (°C) 20221 Fig. 6 - Relative Luminous Intensity vs. Ambient Temperature 100 3.65 VF - Forward Voltage (V) IF - Forward Current (mA) 3.60 10 3.55 3.50 3.45 3.40 3.35 3.30 1 3.25 2.5 20519 3.0 3.5 4.0 4.5 0 20114 VF - Forward Voltage (V) Fig. 4 - Forward Current vs. Forward Voltage 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) Fig. 7 - Forward Voltage vs. Ambient Temperature IV rel - Relative Luminous Intensity 10 1 0.1 1 20520 10 100 IF - Forward Current (mA) Fig. 5 - Relative Luminous Intensity vs. Forward Current Rev. 1.9, 05-Jul-2022 Document Number: 81641 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMB41.. www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 0.9 1.75 ± 0.1 3.5 ± 0.2 0.8 A C technical drawings according to DIN specifications 2.2 2.8 ± 0.15 Pin identification Dimensions in mm Ø 2.4 3 + 0.15 area covered with solderresist Mounting Pad Layout 4 2.6 (2.8) 1.2 1.6 (1.9) 4 Dimensions: reflow and vapor phase (wave soldering) A Protection Diode C Rev. 1.9, 05-Jul-2022 20242 Document Number: 81641 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMB41.. www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM.3..., VLM.4...-SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 10.4 8.4 120° 4.5 3.5 Adhesive tape 13.00 12.75 2.5 1.5 62.5 60.0 Identification Label: Vishay type group tape code production code quantity Blister tape Component cavity 94 8670 TAPING OF VLM.3..., VLM.4... 14.4 max. 321 329 18857 Fig. 10 - Reel Dimensions - GS18 SOLDERING PROFILE 3.5 3.1 2.2 2.0 IR Reflow Soldering Profile for Lead (Pb)-Free Soldering Preconditioning according to JEDEC level 2a 300 8.3 7.7 1.85 1.65 1.6 1.4 4.1 3.9 0.25 4.1 3.9 Temperature (°C) 3.6 3.4 4.0 3.6 Max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 5.75 5.25 200 Max. 30 s 150 Max. 120 s Max. 100 s 100 Max. ramp up 3 °C/s Max. ramp down 6 °C/s 50 2.05 1.95 94 8668 10 0 Fig. 8 - Tape Dimensions in mm for PLCC-2 0 50 100 150 Time (s) 19885 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 200 300 250 Max. 2 cycles allowed Fig. 11 - Vishay Lead (Pb)-free Reflow Soldering Profile (according to J-STD-020) TTW Soldering (according to CECC00802) 300 10.0 9.0 Lead temperature 2.5 1.5 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 2nd line Temperature (°C) 250 4.5 3.5 10000 5s 200 235 °C to 260 °C First wave 100 °C to 130 °C 100 100 2 K/s 50 180 178 Fig. 9 - Reel Dimensions - GS08 Rev. 1.9, 05-Jul-2022 ca. 5 K/s Forced cooling 10 0 14.4 max. 0 94 8665 948626-1 1000 ca. 2 K/s ca. 200 K/s 150 Full line: typical Dotted lines: process limits Second wave 1st line 2nd line 120° 50 100 150 200 250 Time (s) Fig. 12 - Double Wave Soldering of Opto Devices (all Packages) Document Number: 81641 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMB41.. www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) A RECOMMENDED METHOD OF STORAGE N B C D E Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. F G H I K L M A. 2D barcode B. Part No: Vishay part number C. QTY: quantity D. SelCode: selection bin code E. Country of origin F. PTC: production plant code G. Termination finish H. Region code I. Serial#: serial number K. Batch number: year, week, country code, plant code L. SL: storage location M. Environmental symbols: RoHS, lead (Pb)-free, halogen-free N. Lot numbers DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. Aluminum bag Label After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. L E V E L CAUTION This bag contains MOISTURE –SENSITIVE DEVICES 2a 1. Shelf life in sealed bag 12 months at