VLMC3100-GS08

VLMC310. www.vishay.com Vishay Semiconductors Low Current SMD LED PLCC-2 FEATURES • SMD LED with exceptional brightness • Compatible with automatic placement equipment • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 • Available in 8 mm tape 19225 • Low profile package DESCRIPTION • Non-diffused lens: excellent for coupling to light pipes and backlighting These new devices have been designed to meet the increasing demand for low current SMD LEDs. • Low power consumption The package of the VLMC310. is the PLCC-2 (equivalent to a size B tantalum capacitor). • Luminous intensity IVmax./IVmin. ≤ 1.6 It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. ratio in one packaging unit • Preconditioning according to JEDEC® level 2a • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRODUCT GROUP AND PACKAGE DATA APPLICATIONS • Product group: LED • Telecommunication: telephone and fax • Package: SMD PLCC-2 • Product series: low current indicator and backlighting in • Indicator and backlight for audio and video equipment • Angle of half intensity: ± 60° • Indicator and backlight for battery driven equipment • Small indicator for outdoor applications • Indicator and backlight in office equipment • Flat backlight for LCDs, switches, and symbols • General use PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) at IF (mA) WAVELENGTH (nm) FORWARD VOLTAGE (V) at IF (mA) at IF TECHNOLOGY (mA) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. VLMC3100-GS08 Green 0.71 2.0 - 2 562 572 575 2 - 1.9 2.4 2 GaP on GaP VLMC3100-GS18 Green 0.71 2.0 - 2 562 572 575 2 - 1.9 2.4 2 GaP on GaP VLMC3101-GS08 Green 1.12 2.0 - 2 562 572 575 2 - 1.9 2.4 2 GaP on GaP Rev. 1.8, 25-Apr-2022 Document Number: 81649 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMC310. www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMC310. PARAMETER TEST CONDITION SYMBOL VALUE VR 6 V Tamb ≤ 90 °C IF 7 mA tp ≤ 10 μs IFSM 0.34 A mW Reverse voltage (1) DC forward current Surge forward current UNIT Power dissipation PV 20 Junction temperature Tj 100 °C Tamb -40 to +100 °C Tstg -40 to +100 °C Tsd 260 °C RthJA 500 K/W Operating temperature range Storage temperature range t≤5s Soldering temperature Thermal resistance junction to ambient Mounted on PC board (pad size > 16 mm2) Note (1) Driving the LED in reverse direction is suitable for a short term application OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMC310., GREEN PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX UNIT VLMC3100 IV 0.71 2.0 - mcd VLMC3101 IV 1.12 2.0 - mcd Luminous intensity (1) IF = 2 mA Dominant wavelength IF = 2 mA λd 562 572 575 nm Peak wavelength IF = 2 mA λp - 565 - nm Angle of half intensity IF = 2 mA ϕ - ± 60 - ° Forward voltage IF = 2 mA VF - 1.9 2.4 V IR = 10 μA VR 6 15 - V VR = 0 V, f = 1 MHz Cj - 50 - pF Reverse voltage Junction capacitance Note (1) In one packing unit I Vmax./IVmin. ≤ 1.6 LUMINOUS INTENSITY CLASSIFICATION GROUP COLOR CLASSIFICATION LIGHT INTENSITY (mcd) GREEN OPTIONAL MIN. MAX. 1 0.71 0.9 MIN. MAX. 2 0.9 1.12 3 562 565 1 1.12 1.4 4 564 567 2 1.4 1.8 5 566 569 1 1.8 2.24 6 568 571 2 2.24 2.8 7 570 573 1 2.8 3.55 8 572 575 2 3.55 4.5 E F G H Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable Rev. 1.8, 25-Apr-2022 GROUP DOMINANT WAVELENGTH (nm) Note • Wavelengths are tested at a current pulse duration of 25 ms Document Number: 81649 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMC310. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Axis Title 10 100 6 4 2 0 0 20 40 60 80 1000 Green 10 100 1 100 10 1.0 1.5 Tamb - Ambient Temperature (°C) 95 10842 1st line 2nd line 2nd line IF - Forward Current (mA) IF - Forward Current (mA) 8 10000 2.0 2.5 3.0 3.5 VF - Forward Voltage (V) 2nd line Fig. 4 - Forward Current vs. Forward Voltage Fig. 1 - Forward Current vs. Ambient Temperature Axis Title 0° 10° 20° 1000 10000 0.9 50° 0.8 60° 70° 0.7 80° 0.6 0.4 0.2 100 1000 10 Green 100 1 0.1 10 1 0 10 100 IF - Forward Current (mA) 2nd line 95 10319 Fig. 5 - Relative Luminous Intensity vs. Forward Current Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Axis Title Axis Title 1.0 10000 10000 2.0 0.7 1000 1st line 2nd line 0.6 0.5 0.4 100 0.3 0.2 0.1 10 0 500 550 600 650 700 1.5 1000 1st line 2nd line Green 0.8 2nd line IVrel - Relative Luminous Intensity Green 0.9 2nd line Irel - Relative Intensity 1st line 2nd line 1.0 2nd line IV rel - Relative Luminous Intensity 40° ϕ - Angular Displacement IV rel - Relative Luminous Intensity 30° 1.0 100 0.5 0 10 -40 -20 0 20 40 60 80 100 λ - Wavelengths (nm) 2nd line Tamb - Ambient Temperature (°C) 2nd line Fig. 3 - Relative Intensity vs. Wavelength Fig. 6 - Relative Luminous Intensity vs. Ambient Temperature Rev. 1.8, 25-Apr-2022 Document Number: 81649 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMC310. www.vishay.com Vishay Semiconductors Axis Title 10000 Green 1.05 1000 1st line 2nd line 2nd line VF,rel - Relative Forward Voltage (V) 1.10 1.00 100 0.95 0.90 10 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 2nd line Fig. 7 - Relative Forward Voltage vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters 0.9 1.75 ± 0.1 3.5 ± 0.2 0.8 technical drawings according to DIN specifications C A 2.2 2.8 ± 0.15 Pin identification Drawing-No.: 6.541-5067.01-4 Issue: 7; 12.03.14 Ø 2.4 3 + 0.15 Area covered with solderresist 4 2.6 (2.8) Recommended Footprint Mounting Pad Layout 1.2 1.6 (1.9) Rev. 1.8, 25-Apr-2022 4 Document Number: 81649 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMC310. www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM.3..-SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 10.4 8.4 120° 4.5 3.5 Adhesive tape 13.00 12.75 2.5 1.5 62.5 60.0 Identification Label: Vishay type group tape code production code quantity Blister tape Component cavity 94 8670 14.4 max. 321 329 18857 Fig. 10 - Reel Dimensions - GS18 SOLDERING PROFILE TAPING OF VLM.3.. 3.5 3.1 IR Reflow Soldering Profile for Lead (Pb)-free Soldering 2.2 2.0 Preconditioning acc. to JEDEC level 2a 300 8.3 7.7 1.85 1.65 1.6 1.4 4.1 3.9 Temperature (°C) 3.6 3.4 4.0 3.6 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 5.75 5.25 200 max. 30 s 150 max. 100 s max. 120 s 100 0.25 4.1 3.9 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 2.05 1.95 0 94 8668 0 50 100 150 Time (s) Fig. 8 - Tape Dimensions in mm for PLCC-2 200 Fig. 11 - Vishay Lead (Pb)-free Reflow Soldering Profile (according to J-STD-020) TTW Soldering (according to CECC00802) 300 250 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 200 235 °C to 260 °C First wave 100 °C to 130 °C 100 100 2 K/s 50 180 178 Fig. 9 - Reel Dimensions - GS08 Rev. 1.8, 25-Apr-2022 ca. 5 K/s Forced cooling 10 0 14.4 max. 0 94 8665 948626-1 1000 ca. 2 K/s ca. 200 K/s 150 Full line: typical Dotted lines: process limits Second wave 1st line 2nd line 2.5 1.5 Lead temperature 2nd line Temperature (°C) 4.5 3.5 10000 5s 10.0 9.0 120° 300 max. 2 cycles allowed 19885-3 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 250 50 100 150 200 250 Time (s) Fig. 12 - Double Wave Soldering of Opto Devices (all packages) Document Number: 81649 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMC310. www.vishay.com Vishay Semiconductors RECOMMENDED METHOD OF STORAGE PACKING TAPING VARIANT MOQ REELS/BOX GS08 7500 5 GS18 8000 1 Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C BAR CODE PRODUCT LABEL (example) • Storage humidity ≤ 60 % RH max. A B C D E After more than 672 h under these conditions moisture content will be too high for reflow soldering. N Part No: VLMC3100-GS08 QTY: 1500 SelCode: F27 Origin Philippines PTC: 84 e3 Machine:01 G F Lot1: XXXXXXXXXX Lot2: Batch: YYYYWWOOPP Region: 2411 SL: 0010 Serial#: XXXXXXXXXXXX Operator: ChkD: H I K VISHAY H/F L M A. 2D barcode In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. B. Part No: Vishay part number C. QTY: quantity L E V E L CAUTION D. SelCode: selection bin code: F2 (LOP group), 7 (LD group) This bag contains MOISTURE –SENSITIVE DEVICES 2a E. Country of origin 1. Shelf life in sealed bag 12 months at