VLMD3101-GS18

VLMD31.. www.vishay.com Vishay Semiconductors Standard SMD LED PLCC-2 FEATURES • SMD LED with exceptional brightness • Luminous intensity categorized • Compatible equipment with automatic placement • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 948553 DESCRIPTION • Available in 8 mm tape This device has been designed for applications requiring narrow brightness and color selection. • Low profile package • Non-diffused lens: excellent for coupling to light pipes and backlighting The package of this device is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. • Low power consumption PRODUCT GROUP AND PACKAGE DATA • Preconditioning according to JEDEC® level 2a • Product group: LED • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B • Luminous intensity IVmax./IVmin. ≤ 1.6 • Package: SMD PLCC-2 ratio in one packaging unit • AEC-Q101 qualified • Product series: standard • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 • Angle of half intensity: ± 60° APPLICATIONS • Automotive: backlighting in dashboards and switches • Telecommunication: telephone and fax indicator and backlighting in • Indicator and backlight for audio and video equipment • Indicator and backlight in office equipment • Flat backlight for LCDs, switches, and symbols • General use PARTS TABLE PART LUMINOUS INTENSITY (mcd) COLOR at IF (mA) MIN. TYP. MAX. WAVELENGTH (nm) FORWARD VOLTAGE (V) at IF (mA) MIN. TYP. MAX. at IF (mA) TECHNOLOGY MIN. TYP. MAX. VLMD3100-GS08 Red 11.2 22 - 10 - 648 - 10 - 1.8 2.2 20 GaAlAs on GaAs VLMD3100-GS18 Red 11.2 22 - 10 - 648 - 10 - 1.8 2.2 20 GaAlAs on GaAs VLMD3105-GS08 Red 11.2 22 28 10 - 648 - 10 - 1.8 2.2 20 GaAlAs on GaAs VLMD31L2N1-GS08 Red 14 22 35.5 10 - 648 - 10 - 1.8 2.2 20 GaAlAs on GaAs VLMD31M2P1-GS08 Red 22.4 25 56 10 - 648 - 10 - 1.8 2.2 20 GaAlAs on GaAs Rev. 2.2, 12-Sep-2022 Document Number: 81351 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMD31.. www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMD31.. PARAMETER TEST CONDITION SYMBOL VALUE VR 6 V Tamb ≤ 60 °C IF 30 mA tp ≤ 10 μs IFSM 0.5 A PV 100 mW Reverse voltage (1) DC forward current Surge forward current Power dissipation Junction temperature UNIT Tj 100 °C Operating temperature range Tamb -40 to +100 °C Storage temperature range Tstg -40 to +100 °C Tsd 260 °C RthJA 400 K/W t≤5s Soldering temperature Thermal resistance junction to ambient Mounted on PC board (pad size > 16 mm2) Note (1) Driving LED in reverse direction is suitable for short term application OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMD31.., RED PARAMETER TEST CONDITION Luminous intensity (1) IF = 10 mA PART SYMBOL MIN. TYP. MAX. UNIT VLMD3100 IV 11.2 22 - mcd VLMD3105 IV 11.2 22 28 mcd VLMD31L2N1 IV 14 22 35.5 mcd VLMD31M2P1 IV 22.4 25 56 mcd Dominant wavelength IF = 10 mA λd - 648 - nm Peak wavelength IF = 10 mA λp - 650 - nm Angle of half intensity IF = 10 mA ϕ - ± 60 - ° Forward voltage IF = 20 mA VF - 1.8 2.2 V IR = 10 μA VR 6 - - V VR = 0, f = 1 MHz Cj - 7 - pF Reverse voltage Junction capacitance Temperature coefficient of VF IF = 20 mA TCVF - - 1.8 - mV/K Temperature coefficient of λd IF = 10 mA TCλd - 0.05 - nm/K Note (1) In one packing unit I Vmax./IVmin. ≤ 1.6 LUMINOUS INTENSITY CLASSIFICATION GROUP STANDARD LIGHT INTENSITY (mcd) OPTIONAL MIN. MAX. 1 4.5 5.6 2 5.6 7.1 1 7.1 9 2 9 11.2 1 11.2 14 2 14 18 1 18 22.4 2 22.4 28 1 28 35.5 2 35.5 45 1 45 56 J K L M N P Rev. 2.2, 12-Sep-2022 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable CROSSING TABLE VISHAY OSRAM VLMD31L2N1 LHT674-L2N1 VLMD31M2P1 LHT674-M2P1 Document Number: 81351 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMD31.. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 60 1.2 50 1.0 Irel - Relative Intensity IF - Forward Current (mA) red 40 30 20 0.8 0.6 0.4 10 0.2 0 0 20 40 60 80 0 600 100 Tamb - Ambient Temperature (°C) 95 10905 660 680 700 100 10 000 red Tamb < 60 °C tp/T = 0.005 1000 IF - Forward Current (mA) 0.01 0.02 0.05 100 0.2 0.5 DC 0.1 10 0.1 1 10 1 100 tp - Pulse Length (ms) 95 9985 95 10014 Fig. 2 - Permissible Pulse Forward Current vs. Pulse Length 0° 10° 0.9 50° 0.8 60° 70° ϕ - Angular Displacement 40° 80° 0.4 0.2 2.5 3 super red 1 0.1 0.01 1 0 95 10319 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement Rev. 2.2, 12-Sep-2022 2 VF - Forward Voltage (V) 10 1.0 0.7 1.5 Fig. 5 - Forward Current vs. Forward Voltage 20° 30° 0.6 10 1 1 0.01 IV rel - Relative Luminous Intensity IF - Forward Current (mA) 640 - Wavelength (nm) Fig. 4 - Relative Intensity vs. Wavelength Fig. 1 - Maximum Permissible Forward Current vs. Ambient Temperature IV rel - Relative Luminous Intensity 620 9510018-1 16638 10 100 IF - Forward Current (mA) Fig. 6 - Relative Luminous Intensity vs. Forward Current Document Number: 81351 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMD31.. www.vishay.com Vishay Semiconductors IV rel - Relative Luminous Intensity 2.0 super red 1.6 1.2 0.8 0.4 0.0 0 16635 20 40 60 80 Tamb - Ambient Temperature (°C) 100 Fig. 7 - Relative Luminous Intensity vs. Ambient Temperature - Change of Dom. Wavelength (nm) 5 4 3 2 1 0 -1 d -2 -3 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 16637 VF - Change of Forward Voltage (mV) Fig. 8 - Change of Dominant Wavelength vs. Ambient Temperature 200 150 100 50 0 - 50 - 100 - 150 - 200 - 250 - 300 0 16636 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 9 - Change of Forward Voltage vs. Ambient Temperature Rev. 2.2, 12-Sep-2022 Document Number: 81351 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMD31.. www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters Mounting Pad Layout 1.2 4 2.6 (2.8) area covered with solder resist 4 1.6 (1.9) 20415 PACKING INFORMATION PART TAPE AND REEL VLMD31xx-GS08 7500 (5 x 1500) VLMD31xx-GS18 8000 Rev. 2.2, 12-Sep-2022 Document Number: 81351 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMD31.. www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM.3-SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS) PREFERRED 10.4 8.4 120° 4.5 3.5 Adhesive tape 13.00 12.75 2.5 1.5 62.5 60.0 Identification Label: Vishay type group tape code production code quantity Blister tape Component cavity 22972 14.4 max. 321 329 18857 Fig. 12 - Reel Dimensions - GS18 SOLDERING PROFILE TAPING OF VLMD31.. IR Reflow Soldering Profile for Lead (Pb)-free Soldering 3.5 3.1 Anode Preconditioning acc. to JEDEC level 2a 2.2 2.0 Cathode 300 3.6 3.4 8.3 7.7 1.85 1.65 4.1 3.9 1.6 1.4 4.1 3.9 Temperature (°C) 4.0 3.6 5.75 5.25 200 max. 30 s 150 max. 100 s max. 120 s 100 0.25 2.05 1.95 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 16 025 0 0 50 100 150 Time (s) Fig. 10 - Tape Dimensions in mm for PLCC-2 200 Fig. 13 - Vishay Lead (Pb)-free Reflow Soldering Profile (according to J-STD-020) TTW Soldering (according to CECC00802) 300 250 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 200 235 °C to 260 °C First wave 100 °C to 130 °C 100 100 2 K/s 50 180 178 Fig. 11 - Reel Dimensions - GS08 Rev. 2.2, 12-Sep-2022 ca. 5 K/s Forced cooling 10 0 14.4 max. 0 94 8665 948626-1 1000 ca. 2 K/s ca. 200 K/s 150 Full line: typical Dotted lines: process limits Second wave 1st line 2nd line 2.5 1.5 Lead temperature 2nd line Temperature (°C) 4.5 3.5 10000 5s 10.0 9.0 120° 300 max. 2 cycles allowed 19885-3 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS) 250 50 100 150 200 250 Time (s) Fig. 14 - Double Wave Soldering of Opto Devices (all Packages) Document Number: 81351 6 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMD31.. www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) RECOMMENDED METHOD OF STORAGE N A B C D E Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. F G H I K L After more than 672 h under these conditions moisture content will be too high for reflow soldering. M A. 2D barcode In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: B. Part No: Vishay part number 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. C. QTY: quantity D. SelCode: selection bin code E. Country of origin F. PTC: production plant code An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. G. Termination finish H. Region code I. Serial#: serial number K. Batch number: year, week, country code, plant code L. SL: storage location M. Environmental halogen-free symbols: L E V E L CAUTION This bag contains MOISTURE –SENSITIVE DEVICES RoHS, lead (Pb)-free, 2a 1. Shelf life in sealed bag 12 months at