VLME3105-GS08

VLME3100 www.vishay.com Vishay Semiconductors High Intensity SMD LED PLCC-2 FEATURES • SMD LED with exceptional brightness • Luminous intensity categorized • Compatible equipment with automatic placement • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 19225 DESCRIPTION • Available in 8 mm tape This device has been designed to meet the increasing demand for AlInGaP technology. • Low profile package The package of the VLME3100 is the PLCC-2 (equivalent to a size B tantalum capacitor). It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. • Non-diffused lens: excellent for coupling to light pipes and backlighting • Low power consumption • Luminous intensity IVmax./IVmin. ≤ 1.6 ratio in one packaging unit • Preconditioning according to JEDEC® level 2a PRODUCT GROUP AND PACKAGE DATA • AEC-Q101 qualified • Product group: LED • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 • Package: SMD PLCC-2 • Product series: standard APPLICATIONS • Angle of half intensity: ± 60° • Automotive: backlighting in dashboards and switches • Telecommunication: telephone and fax indicator and backlighting in • Indicator and backlight for audio and video equipment • Indicator and backlight in office equipment • Flat backlight for LCDs, switches, and symbols • General use PARTS TABLE PART VLME3100-GS08 Rev. 1.8, 12-Sep-2022 LUMINOUS INTENSITY (mcd) COLOR Yellow at IF (mA) MIN. TYP. MAX. 28 75 - WAVELENGTH (nm) at IF (mA) MIN. TYP. MAX. 10 581 588 594 10 FORWARD VOLTAGE at IF (V) (mA) MIN. TYP. MAX. - 2.0 2.6 20 TECHNOLOGY AllnGaP on GaAs Document Number: 81231 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLME3100 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLME3100 PARAMETER TEST CONDITION SYMBOL VALUE UNIT VR IF 5 30 0.1 80 +125 -40 to +100 -40 to +100 400 V mA A mW °C °C °C K/W Reverse voltage (1) DC forward current Tamb ≤ 85 °C Surge forward current tp ≤ 10 μs Power dissipation Junction temperature Operating temperature range Storage temperature range Thermal resistance junction to ambient Mounted on PC board (pad size > 16 mm2) IFSM PV Tj Tamb Tstg RthJA Note (1) Driving the LED in reverse direction is suitable for a short term application OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLME3100, YELLOW PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) Dominant wavelength Peak wavelength Angle of half intensity Forward voltage Reverse voltage Junction capacitance IF = 10 mA IF = 10 mA IF = 10 mA IF = 10 mA IF = 20 mA IR = 10 μA VR = 0 V, f = 1 MHz lV λd λp ϕ VF VR Cj 28 581 5 - 75 588 590 ± 60 2.0 15 594 2.6 - mcd nm nm ° V V pF Note (1) In one packing unit I Vmax./IVmin. ≤ 1.6 LUMINOUS INTENSITY CLASSIFICATION GROUP STANDARD CROSSING TABLE LUMINOUS INTENSITY IV (mcd) OPTIONAL MIN. MAX. 1 2 1 2 1 2 1 2 1 2 28.0 35.5 45 56 71 90 112 140 180 224 35.5 45 56 71 90 112 140 180 224 280 N P Q R S Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one reel. In order to ensure availability, single wavelength groups will not be orderable Rev. 1.8, 12-Sep-2022 VISHAY OSRAM VLME3100 LYT676 COLOR CLASSIFICATION YELLOW GROUP 1 2 3 4 5 6 DOM. WAVELENGTH (nm) MIN. MAX. 581 583 585 587 589 591 584 586 588 590 592 594 Note • Wavelengths are tested at a current pulse duration of 25 ms Document Number: 81231 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLME3100 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 40 1.2 IF = 20 mA 1.0 Irel - Relative Intensity IF - Forward Current (mA) 35 30 25 20 15 10 0.8 0.6 0.4 0.2 5 0.0 550 0 0 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) 16615 570 Fig. 1 - Forward Current vs. Ambient Temperature 590 610 630 650 λ - Wavelength (nm) 95 10881 Fig. 4 - Relative Intensity vs. Wavelength 100 1000 IF - Forward Current (mA) 0.02 0.05 0.1 100 0.2 0.5 1 10 0.01 0.1 1 10 1 tp - Pulse Length (ms) 16621 20° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 80° 0.4 0.2 0 95 10319 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement Rev. 1.8, 12-Sep-2022 2.5 3 10 1 0.1 0.01 1 0.6 2 Fig. 5 - Forward Current vs. Forward Voltage ϕ - Angular Displacement IV rel - Relative Luminous Intensity 10° 1.5 VF - Forward Voltage (V) 95 10878 Fig. 2 - Forward Current vs. Pulse Length 0° 10 1 100 IV rel - Relative Luminous Intensity IFM - Forward Current (mA) tp/T = 0.01 9611588 10 100 IF - Forward Current (mA) Fig. 6 - Relative Luminous Intensity vs. Forward Current Document Number: 81231 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLME3100 www.vishay.com Vishay Semiconductors Ispec - Specific Luminous Intensity 2.0 1.6 1.2 0.8 0.4 0.0 1 2 5 1 0.5 0.2 96 11589 10 50 IF (mA) 20 0.1 0.05 0.02 tp/T Fig. 7 - Relative Luminous Intensity vs. Forward Current / Duty Cycle IV rel - Relative Luminous Intensity 1.6 1.4 IF = 20 mA 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 95 10880 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) Fig. 8 - Relative Luminous Intensity vs. Ambient Temperature VF rel - Relative Forward Voltage (V) 2.15 IF = 20 mA 2.10 yellow 2.05 2.00 1.95 1.90 1.85 1.80 1.75 1.70 1.65 0 16616 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) Fig. 9 - Forward Voltage vs. Ambient Temperature Rev. 1.8, 12-Sep-2022 Document Number: 81231 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLME3100 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 0.9 1.75 ± 0.1 3.5 ± 0.2 0.8 technical drawings according to DIN specifications C A 2.2 2.8 ± 0.15 Pin identification Drawing-No.: 6.541-5067.01-4 Issue: 7; 12.03.14 Ø 2.4 3 + 0.15 Area covered with solderresist 4 2.6 (2.8) Recommended Footprint Mounting Pad Layout 1.2 1.6 (1.9) 4 PACKING INFORMATION PART VLME3100-GS08 Rev. 1.8, 12-Sep-2022 TAPE AND REEL 7500 (5 x 1500) Document Number: 81231 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLME3100 www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM3 - SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO 564) for automatic component insertation. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSIONS IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS) PREFERRED 10.4 8.4 120° 4.5 3.5 Adhesive tape 13.00 12.75 2.5 1.5 62.5 60.0 Identification Label: Vishay type group tape code production code quantity Blister tape Component cavity 94 8670 TAPING OF VLM.3.. 3.5 3.1 14.4 max. 321 329 18857 Fig. 12 - Reel Dimensions - GS18 SOLDERING PROFILE 2.2 2.0 IR Reflow Soldering Profile for Lead (Pb)-free Soldering Preconditioning acc. to JEDEC level 2a 300 5.75 5.25 8.3 7.7 1.85 1.65 1.6 1.4 4.1 3.9 0.25 4.1 3.9 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 Temperature (°C) 3.6 3.4 4.0 3.6 200 max. 30 s 150 max. 100 s max. 120 s 100 2.05 1.95 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 94 8668 0 Fig. 10 - Tape Dimensions in mm for PLCC-2 0 50 100 150 Time (s) 200 300 max. 2 cycles allowed 19885-3 REEL PACKAGE DIMENSIONS IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS) 250 Fig. 13 - Vishay Lead (Pb)-free Reflow Soldering Profile (according to J-STD-020C) TTW Soldering (according to CECC00802) Lead temperature 250 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 2nd line Temperature (°C) 2.5 1.5 10000 5s 200 235 °C to 260 °C First wave 100 °C to 130 °C 100 100 2 K/s 50 ca. 5 K/s Forced cooling 10 0 180 178 Fig. 11 - Reel Dimensions - GS08 Rev. 1.8, 12-Sep-2022 0 14.4 max. 94 8665 948626-1 1000 ca. 2 K/s ca. 200 K/s 150 Full line: typical Dotted lines: process limits Second wave 1st line 2nd line 120° 4.5 3.5 300 10.0 9.0 50 100 150 200 250 Time (s) Fig. 14 - Double Wave Soldering of Opto Devices (all Packages) Document Number: 81231 6 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLME3100 www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) RECOMMENDED METHOD OF STORAGE N A B C D E Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. F G H I K L After more than 672 h under these conditions moisture content will be too high for reflow soldering. M A. 2D barcode In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: B. Part No: Vishay part number 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. C. QTY: quantity D. SelCode: selection bin code E. Country of origin F. PTC: production plant code An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. G. Termination finish H. Region code I. Serial#: serial number K. Batch number: year, week, country code, plant code L. SL: storage location M. Environmental halogen-free symbols: L E V E L CAUTION This bag contains MOISTURE –SENSITIVE DEVICES RoHS, lead (Pb)-free, 2a 1. Shelf life in sealed bag 12 months at