VLME31Q2T1-GS08

VLME31.. www.vishay.com Vishay Semiconductors Standard SMD LED PLCC-2 FEATURES • SMD LED with exceptional brightness • Luminous intensity categorized • Compatible equipment with automatic placement • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 • Available in 8 mm tape 19225 • Low profile package • Non-diffused lens: excellent for coupling to light pipes and backlighting DESCRIPTION • Low power consumption This device has been designed to meet the increasing demand for AlInGaP technology. • Luminous intensity IVmax./IVmin. ≤ 1.6 ratio in one packaging unit The package of the VLME31-series is the PLCC-2. • Preconditioning according to JEDEC® level 2a It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B • AEC-Q101 qualified PRODUCT GROUP AND PACKAGE DATA • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 • Product group: LED • Package: SMD PLCC-2 APPLICATIONS • Product series: standard • Automotive: backlighting in dashboards and switches • Angle of half intensity: ± 60° • Telecommunication: telephone and fax indicator and backlighting in • Indicator and backlight for audio and video equipment • Indicator and backlight in office equipment • Flat backlight for LCDs, switches, and symbols • General use PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) at IF (mA) MIN. TYP. MAX. WAVELENGTH (nm) FORWARD VOLTAGE (V) at IF (mA) MIN. TYP. MAX. at IF (mA) TECHNOLOGY MIN. TYP. MAX. VLME31Q2T1-GS08 Yellow 90 190 355 20 581 588 594 20 - 2.0 2.6 20 AllnGaP on GaAs VLME31R1S2-GS08 Yellow 112 195 280 20 581 588 594 20 - 2.0 2.6 20 AllnGaP on GaAs VLME31S1T1-GS08 Yellow 180 210 355 20 581 588 594 20 - 2.0 2.6 20 AllnGaP on GaAs Rev. 2.0, 12-Apr-2022 Document Number: 81324 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLME31.. www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLME31.. PARAMETER TEST CONDITION SYMBOL VALUE VR 5 V Tamb ≤ 85 °C IF 30 mA tp ≤ 10 μs IFSM 0.1 A PV 80 mW Reverse voltage (1) DC forward current Surge forward current Power dissipation Junction temperature Operating temperature range Storage temperature range Thermal resistance junction to ambient Mounted on PC board (pad size > 16 mm2) UNIT Tj +125 °C Tamb -40 to +100 °C Tstg -40 to +100 °C RthJA 400 K/W Note (1) Driving the LED in reverse direction is suitable for a short term application OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLME31.., YELLOW PARAMETER TEST CONDITION Luminous intensity (1) IF = 20 mA Dominant wavelength IF = 20 mA Peak wavelength IF = 20 mA PART SYMBOL MIN. TYP. MAX. UNIT VLME31Q2T1 lV 90 190 355 mcd VLME31R1S2 lV 112 195 280 mcd VLME31S1T1 lV 180 210 355 mcd VLME31Q2T1, VLME31R1S2, VLME31S1T1 λd 581 588 594 nm λp - 590 - nm Angle of half intensity IF = 20 mA ϕ - ± 60 - ° Forward voltage IF = 20 mA VF - 2.0 2.6 V IR = 10 μA VR 5 - - V VR = 0 V, f = 1 MHz Cj - 15 - pF Reverse voltage Junction capacitance Note (1) In one packing unit I Vmax./IVmin. ≤ 1.6 LUMINOUS INTENSITY CLASSIFICATION GROUP STANDARD CROSSING TABLE LUMINOUS INTENSITY IV (mcd) VISHAY OSRAM OPTIONAL MIN. MAX. VLME31Q2T1 LYT676-Q2T1 1 71 90 VLME31R1S2 LYT676-R1S2 2 90 112 VLME31S1T1 LYT676-S1T1 1 112 140 2 140 180 1 180 224 2 224 280 1 280 355 2 355 450 Q R S T Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one reel. In order to ensure availability, single wavelength groups will not be orderable Rev. 2.0, 12-Apr-2022 COLOR CLASSIFICATION YELLOW GROUP DOM. WAVELENGTH (NM) MIN. MAX. 1 581 584 2 583 586 3 585 588 4 587 590 5 589 592 6 591 594 Note • Wavelengths are tested at a current pulse duration of 25 ms Document Number: 81324 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLME31.. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.2 40 IF = 20 mA 1.0 Irel - Relative Intensity IF - Forward Current (mA) 35 30 25 20 15 10 0.8 0.6 0.4 0.2 5 0.0 550 0 0 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) 16615 570 Fig. 1 - Forward Current vs. Ambient Temperature 590 610 630 650 λ - Wavelength (nm) 95 10881 Fig. 4 - Relative Intensity vs. Wavelength 100 1000 IF - Forward Current (mA) 0.02 0.05 0.1 100 0.2 0.5 1 10 0.01 1 10 100 1 tp - Pulse Length (ms) 16621 95 10878 Fig. 2 - Forward Current vs. Pulse Length 0° 10° 20° 2 2.5 3 10 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 1.5 VF - Forward Voltage (V) Fig. 5 - Forward Current vs. Forward Voltage ϕ - Angular Displacement IV rel - Relative Luminous Intensity 10 1 0.1 80° IV rel - Relative Luminous Intensity IFM - Forward Current (mA) tp/T = 0.01 1 0.1 0.01 0.6 0.4 0.2 0 95 10319 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement Rev. 2.0, 12-Apr-2022 1 10 IF - Forward Current (mA) 100 Fig. 6 - Relative Luminous Intensity vs. Forward Current Document Number: 81324 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLME31.. www.vishay.com Vishay Semiconductors IV rel - Relative Luminous Intensity 1.6 1.4 IF = 20 mA 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 95 10880 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) Fig. 7 - Relative Luminous Intensity vs. Ambient Temperature 2.15 yellow VF - Forward Voltage (V) 2.10 2.05 2.00 1.95 1.90 1.85 1.80 1.75 IF = 20 mA 1.70 1.65 0 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) 17502 Ispec - Specific Luminous Intensity Fig. 8 - Forward Voltage vs. Ambient Temperature 2.0 1.6 1.2 0.8 0.4 0.0 96 11589 1 2 5 1 0.5 0.2 10 20 0.1 0.05 50 IF (mA) 0.02 tp/T Fig. 9 - Relative Luminous Intensity vs. Forward Current/Duty Cycle Rev. 2.0, 12-Apr-2022 Document Number: 81324 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLME31.. www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 0.9 1.75 ± 0.1 3.5 ± 0.2 0.8 technical drawings according to DIN specifications C A 2.2 2.8 ± 0.15 Pin identification Drawing-No.: 6.541-5067.01-4 Issue: 7; 12.03.14 Ø 2.4 3 + 0.15 Area covered with solderresist 4 2.6 (2.8) Recommended Footprint Mounting Pad Layout 1.2 1.6 (1.9) Rev. 2.0, 12-Apr-2022 4 Document Number: 81324 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLME31.. www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM3 - SERIES) SOLDERING PROFILE Adhesive tape IR Reflow Soldering Profile for Lead (Pb)-free Soldering Preconditioning acc. to JEDEC level 3 300 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 Temperature (°C) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO 564) for automatic component insertation. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 Blister tape 0 0 50 100 150 Time (s) 200 250 300 max. 2 cycles allowed 19885-1 Fig. 12 - Vishay Lead (Pb)-free Reflow Soldering Profile (according to J-STD-020C) Component cavity 94 8670 TTW Soldering (according to CECC00802) TAPING OF VLM.3.. 300 10000 5s Lead temperature 2.2 2.0 5.75 5.25 3.6 3.4 4.0 3.6 8.3 7.7 2nd line Temperature (°C) 250 4.1 3.9 100 °C to 130 °C 100 100 50 ca. 5 K/s Forced cooling 0.25 4.1 3.9 10 0 2.05 1.95 0 94 8668 948626-1 Fig. 10 - Tape Dimensions in mm for PLCC-2 1000 ca. 2 K/s ca. 200 K/s 150 Full line: typical Dotted lines: process limits Second wave 2 K/s 1.85 1.65 1.6 1.4 200 235 °C to 260 °C First wave 1st line 2nd line 3.5 3.1 50 100 150 200 250 Time (s) Fig. 13 - Double Wave Soldering of Opto Devices (all Packages) REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS) 10.0 9.0 120° 4.5 3.5 2.5 1.5 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 180 178 14.4 max. 94 8665 Fig. 11 - Reel Dimensions - GS08 Rev. 2.0, 12-Apr-2022 Document Number: 81324 6 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLME31.. www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 106 A RECOMMENDED METHOD OF STORAGE H VISHAY • Storage temperature 10 °C to 30 °C 37 • Storage humidity ≤ 60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering. B C D E F G 20120 A. Type of component B. Manufacturing plant C. SEL - selection code (bin): e.g.: Q2 = code for luminous intensity group 3 = code for color group D. Date code year / week In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. E. Day code (e.g. 1: Monday) F. Batch no. G. Total quantity L E V E L CAUTION H. Company code This bag contains MOISTURE –SENSITIVE DEVICES DRY PACKING 2a 1. Shelf life in sealed bag 12 months at