VLMF3100-GS18

VLMF3100 www.vishay.com Vishay Semiconductors Standard SMD LED PLCC-2 FEATURES • SMD LED with exceptional brightness • Luminous intensity categorized • Compatible equipment with automatic placement • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 19225 DESCRIPTION • Available in 8 mm tape This device has been designed to meet the increasing demand for AlInGaP technology. • Low profile package • Non-diffused lens: Excellent for coupling to light pipes and backlighting The package of the VLMF3100 is the PLCC-2 (equivalent to a size B tantalum capacitor). • Low power consumption It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. • Luminous intensity IVmax./IVmin.  1.6 ratio in one packaging unit • Preconditioning according to JEDEC® level 2a PRODUCT GROUP AND PACKAGE DATA • Product group: LED • ESD-withstand voltage: Up to 2 kV according to JESD22-A114-B • Package: SMD PLCC-2 • AEC-Q101 qualified • Product series: standard • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 • Angle of half intensity: ± 60° APPLICATIONS • Automotive: Backlighting in dashboards and switches • Telecommunication: telephone and fax Indicator and backlighting in • Indicator and backlight for audio and video equipment • Indicator and backlight in office equipment • Flat backlight for LCDs, switches, and symbols • General use PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) at IF (mA) MIN. TYP. MAX. WAVELENGTH (nm) FORWARD VOLTAGE (V) at IF (mA) MIN. TYP. MAX. at IF (mA) TECHNOLOGY MIN. TYP. MAX. VLMF3100-GS08 Soft orange 28 90 - 10 598 605 611 10 - 2.0 2.6 20 AllnGaP on GaAs VLMF3100-GS18 Soft orange 28 90 - 10 598 605 611 10 - 2.0 2.6 20 AllnGaP on GaAs Rev. 1.4, 26-Sep-13 Document Number: 81235 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMF3100 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMF3100 PARAMETER TEST CONDITION SYMBOL VALUE VR 5 V Tamb  85 °C IF 30 mA tp  10 μs IFSM 0.1 A PV 80 mW Reverse voltage (1) DC Forward current Surge forward current Power dissipation Tj 125 °C Tamb -40 to +100 °C Tstg -40 to +100 °C RthJA 400 K/W Junction temperature Operating temperature range Storage temperature range Mounted on PC board (pad size > 16 mm2) Thermal resistance junction/ambient UNIT Note (1) Driving LED in reverse direction is suitable for short term application OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMF3100, SOFT ORANGE PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity IF = 10 mA VLMF3100 IV 28 90 - mcd Dominant wavelength IF = 10 mA d 598 605 611 nm Peak wavelength IF = 10 mA p - 590 - nm Angle of half intensity IF = 10 mA  - ± 60 - deg Forward voltage IF = 20 mA VF - 2.0 2.6 V Reverse voltage IR = 10 μA VR 5 - - V VR = 0 V, f = 1 MHz Cj - 15 - pF Junction capacitance Note • In one packing unit IVmax./IVmin.  1.6 LUMINOUS INTENSITY CLASSIFICATION GROUP STANDARD CROSSING TABLE LIGHT INTENSITY (mcd) OPTIONAL M N P Q R S MIN. MAX. 2 22.4 28.0 1 28.0 35.5 2 35.5 45 1 45 56 2 56 71 1 71 90 2 90 112 1 112 140 2 140 180 1 180 224 2 224 280 OSRAM LOT676 1 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable. Rev. 1.4, 26-Sep-13 VISHAY VLMF3100 COLOR CLASSIFICATION SOFT ORANGE GROUP DOM. WAVELENGTH (nm) MIN. MAX. 1 598 601 2 600 603 3 602 605 4 604 607 5 606 609 6 608 611         Document Number: 81235 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMF3100 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) I V rel - Relative Luminous Intensity 40 IF - Forward Current (mA) 35 30 25 20 15 10 5 10 20 30 40 50 60 70 80 1.2 1.0 0.8 0.6 0.4 0.2 90 100 0 Tamb - Ambient Temperature (°C) 16615 Fig. 1 - Forward Current vs. Ambient Temperature for InGaN 0° 10° 20° 40° 1.0 0.9 50° 0.8 60° 70° ϕ - Angular Displacement 30° 0.7 80° 0.6 0.4 0.2 0 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement 95 10878 1.5 2 2.5 Fig. 3 - Forward Current vs. Forward Voltage Rev. 1.4, 26-Sep-13 50 60 70 80 90 100 2.0 1.6 1.2 0.8 0.4 1 2 5 1 0.5 0.2 10 20 0.1 0.05 50 IF (mA) 0.02 tp/T Fig. 5 - Relative Luminous Intensity vs. Forward Current/Duty Cycle 10 1 0.1 0.01 3 VF - Forward Voltage (V) 40 0.0 IV rel - Relative Luminous Intensity 1 30 Fig. 4 - Relative Luminous Intensity vs. Ambient Temperature 100 10 20 Tamb - Ambient Temperature (°C) 96 11589 95 10319 1 10 95 10883 Ispec - Specific Luminous Intensity 0 IV rel - Relative Luminous Intensity 1.4 0.0 0 IF - Forward Current (mA) 1.6 1 9611588 10 100 IF - Forward Current (mA) Fig. 6 - Relative Luminous Intensity vs. Forward Current Document Number: 81235 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMF3100 www.vishay.com Vishay Semiconductors             1.2 soft orange I rel - Relative Intensity 1.0 0.8 0.6 0.4 0.2 0.0 560 580 600 620 640 660 λ - Wavelength (nm) 95 10885 Fig. 7 - Relative Intensity vs. Wavelength VFrel - Forward Voltage (V) 2.10 I F = 20 mA 2.05 2.00 soft orange 1.95 1.90 1.85 1.80 1.75 1.70 1.65 1.60 0 16619 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) Fig. 8 - Forward Voltage vs. Ambient Temperature 1000.00 I FM - Forward Current (mA) tp /T = 0.01 0.02 0.05 0.1 100.00 0.2 0.5 1 10.00 0.01 16620 0.10 1.00 10.00 100.00 t p - Pulse Length (ms) Fig. 9 - Forward Current vs. Pulse Length     Rev. 1.4, 26-Sep-13 Document Number: 81235 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMF3100 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 0.9 1.75±0.1 3.5±0.2 0.8 Technical drawings according to DIN specifications C A 2.2 2.8±0.15 Pin identification Dimensions in mm Drawing-No.: 6.541-5067.01-4 Issue: 6; 23.09.13 Ø2.4 3 +0.15 Mounting Pad Layout 4 2.6 (2.8) 1.2 Area covered with solderresist 1.6 (1.9) 4 Dimensions: Reflow and vapor phase (wave soldering) Rev. 1.4, 26-Sep-13 Document Number: 81235 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMF3100 www.vishay.com Vishay Semiconductors METHOD OF TAPING/POLARITY AND TAPE AND REEL SMD LED (VLM3 - SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertation. The blister tape is a plastic strip with impressed component cavaties, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 10.4 8.4 120° 4.5 3.5 13.00 12.75 2.5 1.5 Adhesive tape 62.5 60.0 Identification Label: Vishay type group tape code production code quantity Blister tape 14.4 max. 321 329 18857 Fig. 12 - Reel Dimensions - GS18 Component cavity 94 8670 SOLDERING PROFILE TAPING OF VLM.31.. IR Reflow Soldering Profile for Lead (Pb)-free Soldering 3.5 3.1 Preconditioning acc. to JEDEC level 2a 2.2 2.0 300 3.6 3.4 4.0 3.6 8.3 7.7 1.85 1.65 1.6 1.4 4.1 3.9 0.25 4.1 3.9 Temperature (°C) 5.75 5.25 200 max. 30 s 150 94 8668 Fig. 10 - Tape Dimensions in mm for PLCC-2 max. 100 s max. 120 s 100 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 2.05 1.95 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 0 0 50 100 150 Time (s) 200 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 250 300 max. 2 cycles allowed 19885 Fig. 13 - Vishay Leadfree Reflow Soldering Profile (acc. to J-STD-020B) TTW Soldering (acc. to CECC00802) 300 10.0 9.0 120° 2.5 1.5 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity Temperature (°C) 4.5 3.5 5s 250 235 °C to 260 °C first wave 200 lead temperature second full line: typical wave dotted line: process limits ca. 200 K/s 150 100 °C to 130 °C ca. 2 K/s 100 2 K/s ca. 5 K/s 50 forced cooling 180 178 Fig. 11 - Reel Dimensions - GS08 Rev. 1.4, 26-Sep-13 0 14.4 max. 0 94 8665 948626-1 50 100 150 200 250 Time (s) Fig. 14 - Double Wave Soldering of Opto Devices (all Packages) Document Number: 81235 6 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMF3100 www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 106 A RECOMMENDED METHOD OF STORAGE H VISHAY • Storage temperature 10 °C to 30 °C 37 • Storage humidity  60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering. B C D E F G 19905 A. Type of component B. Manufacturing Plant C. SEL - selection code (bin): e.g.: N2 = code for luminous intensity group 3 = code for color group D. Date code year/week In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air/nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. E. Day code (e. g. 1: Monday) F. Batch no. G. Total quantity L E V E L H. Company code CAUTION This bag contains MOISTURE –SENSITIVE DEVICES DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. Aluminum bag 2a 1. Shelf life in sealed bag 12 months at