VLMF31R1S2-GS18

VLMF31.. www.vishay.com Vishay Semiconductors High Intensity SMD LED PLCC-2 FEATURES • SMD LED with exceptional brightness • Luminous intensity categorized • Compatible equipment with automatic placement • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 19225 • Available in 8 mm tape DESCRIPTION • Low profile package This device has been designed to meet the increasing demand for AlInGaP technology. • Non-diffused lens: excellent for coupling to light pipes and backlighting The package of the VLMF31.. is the PLCC-2. • Low power consumption It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. • Luminous intensity IVmax./IVmin. ≤ 1.6 ratio in one packaging unit • Preconditioning according to JEDEC® level 2a PRODUCT GROUP AND PACKAGE DATA • Product group: LED • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B • Package: SMD PLCC-2 • AEC-Q101 qualified • Product series: standard • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 • Angle of half intensity: ± 60° APPLICATIONS • Automotive: backlighting in dashboards and switches • Telecommunication: telephone and fax indicator and backlighting in • Indicator and backlight for audio and video equipment • Indicator and backlight in office equipment • Flat backlight for LCDs, switches, and symbols • General use PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) at IF (mA) MIN. TYP. MAX. WAVELENGTH (nm) FORWARD VOLTAGE (V) at IF (mA) MIN. TYP. MAX. at IF (mA) TECHNOLOGY MIN. TYP. MAX. VLMF31Q2T1-GS08 Soft orange 90 200 355 20 598 605 611 20 - 2.0 2.6 20 AllnGaP on GaAs VLMF31Q2T1-GS18 (1) Soft orange 90 200 355 20 598 605 611 20 - 2.0 2.6 20 AllnGaP on GaAs VLMF31S1T1-GS08 (1) Soft orange 180 206 355 20 598 605 611 20 - 2.0 2.6 20 AllnGaP on GaAs VLMF31S1T1-GS18 (1) Soft orange 180 206 355 20 598 605 611 20 - 2.0 2.6 20 AllnGaP on GaAs Note (1) Not for new designs Rev. 1.9, 23-Sep-2021 Document Number: 81330 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMF31.. www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMF31.. PARAMETER TEST CONDITION SYMBOL VALUE VR 5 V Tamb ≤ 85 °C IF 30 mA tp ≤ 10 μs IFSM 0.1 A PV 80 mW Reverse voltage (1) DC forward current Surge forward current Power dissipation Tj + 125 °C Tamb -40 to +100 °C Tstg -40 to +100 °C RthJA 400 K/W Junction temperature Operating temperature range Storage temperature range Thermal resistance junction to ambient Mounted on PC board (pad size > 16 mm2) UNIT Note (1) Driving the LED in reverse direction is suitable for a short term application OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMF31.., SOFT ORANGE PARAMETER TEST CONDITION Luminous intensity (1) IF = 20 mA Dominant wavelength IF = 20 mA Peak wavelength IF = 20 mA PART SYMBOL MIN. TYP. MAX. UNIT VLMF31Q2T1 lV 90 200 355 mcd VLMF31S1T1 (2) lV 180 206 355 mcd VLMF31Q2T1, VLMF31S1T1 (2) λd 598 605 611 nm λp - 610 - nm Angle of half intensity IF = 20 mA ϕ - ± 60 - ° Forward voltage IF = 20 mA VF - 2.0 2.6 V IR = 10 μA VR 5 - - V VR = 0 V, f = 1 MHz Cj - 15 - pF Reverse voltage Junction capacitance Notes (1) In one packing unit I Vmax./IVmin. ≤ 1.6 (2) Not for new designs LUMINOUS INTENSITY CLASSIFICATION GROUP STANDARD CROSSING TABLE LUMINOUS INTENSITY IV (mcd) VISHAY OSRAM OPTIONAL MIN. MAX. VLMF31Q2T1 LOT676-Q2T1 1 45 56 VLMF31S1T1 LOT676-S1T1 2 56 71 1 71 90 2 90 112 1 112 140 P Q R S T 2 140 180 1 180 224 2 224 280 1 280 355 2 355 450 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one reel. In order to ensure availability, single wavelength groups will not be orderable Rev. 1.9, 23-Sep-2021 COLOR CLASSIFICATION SOFT ORANGE GROUP DOM. WAVELENGTH (NM) MIN. MAX. 1 598 601 2 600 603 3 602 605 4 604 607 5 606 609 6 608 611 Note • Wavelengths are tested at a current pulse duration of 25 ms Document Number: 81330 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMF31.. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.2 40 soft orange IF - Forward Current (mA) 35 1.0 I rel - Relative Intensity 30 25 20 15 10 0.8 0.6 0.4 0.2 5 0 0.0 0 10 20 30 40 50 60 70 80 90 100 560 Tamb - Ambient Temperature (°C) 16615 580 Fig. 1 - Forward Current vs. Ambient Temperature 600 620 640 660 λ - Wavelength (nm) 95 10885 Fig. 4 - Relative Intensity vs. Wavelength 100 1000.00 IF - Forward Current (mA) 0.02 0.05 0.1 100.00 0.2 0.5 1 10.00 0.01 1.00 10.00 100.00 1 t p - Pulse Length (ms) 16620 95 10878 Fig. 2 - Forward Current vs. Pulse Length 0° 10° 2 2.5 3 20° 10 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 1.5 VF - Forward Voltage (V) Fig. 5 - Forward Current vs. Forward Voltage ϕ - Angular Displacement IV rel - Relative Luminous Intensity 10 1 0.10 80° orange I Vrel- Relative Luminous Intensity I FM - Forward Current (mA) tp /T = 0.01 1 0.1 0.01 0.6 0.4 0.2 95 10319 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement Rev. 1.9, 23-Sep-2021 1 0 19109 10 100 IF - Forward Current (mA) Fig. 6 - Relative Luminous Intensity vs. Forward Current Document Number: 81330 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMF31.. Vishay Semiconductors 1.6 VF - Change of Forward Voltage (mV) I V rel - Relative Luminous Intensity www.vishay.com 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 10 95 10883 20 30 40 50 60 70 80 200 150 100 50 0 - 50 - 100 - 150 - 200 - 250 - 300 90 100 0 Tamb - Ambient Temperature (°C) 16636 Fig. 7 - Relative Luminous Intensity vs. Ambient Temperature 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 8 - Forward Voltage vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters 0.9 1.75 ± 0.1 3.5 ± 0.2 0.8 technical drawings according to DIN specifications C A 2.2 2.8 ± 0.15 Pin identification Drawing-No.: 6.541-5067.01-4 Issue: 7; 12.03.14 Ø 2.4 3 + 0.15 Mounting Pad Layout Area covered with solderresist 4 2.6 (2.8) 1.2 1.6 (1.9) 4 Dimensions: reflow and vapor phase (wave soldering) Rev. 1.9, 23-Sep-2021 Document Number: 81330 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMF31.. www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM3 - SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO 564) for automatic component insertation. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS) PREFERRED 10.4 8.4 120° 4.5 3.5 Adhesive tape 13.00 12.75 2.5 1.5 Blister tape Component cavity 14.4 max. 321 329 18857 Fig. 11 - Reel Dimensions - GS18 94 8670 SOLDERING PROFILE TAPING OF VLM.3.. IR Reflow Soldering Profile for Lead (Pb)-free Soldering 3.5 3.1 Preconditioning acc. to JEDEC level 3 2.2 2.0 300 8.3 7.7 1.85 1.65 4.1 3.9 Temperature (°C) 3.6 3.4 4.0 3.6 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 5.75 5.25 1.6 1.4 62.5 60.0 Identification Label: Vishay type group tape code production code quantity 200 max. 30 s 150 max. 100 s max. 120 s 100 0.25 4.1 3.9 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 2.05 1.95 0 94 8668 0 Fig. 9 - Tape Dimensions in mm for PLCC-2 50 100 150 Time (s) 200 250 300 max. 2 cycles allowed 19885-1 Fig. 12 - Vishay Lead (Pb)-free Reflow Soldering Profile (according to J-STD-020C) REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS) TTW Soldering (according to CECC00802) 300 10000 5s Lead temperature 4.5 3.5 2.5 1.5 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 2nd line Temperature (°C) 120° 250 200 235 °C to 260 °C First wave 100 °C to 130 °C 100 100 2 K/s 50 ca. 5 K/s Forced cooling 10 0 180 178 Fig. 10 - Reel Dimensions - GS08 Rev. 1.9, 23-Sep-2021 0 14.4 max. 94 8665 948626-1 1000 ca. 2 K/s ca. 200 K/s 150 Full line: typical Dotted lines: process limits Second wave 1st line 2nd line 10.0 9.0 50 100 150 200 250 Time (s) Fig. 13 - Double Wave Soldering of Opto Devices (all Packages) Document Number: 81330 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMF31.. www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 106 A RECOMMENDED METHOD OF STORAGE H VISHAY 37 • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. B C D E F 20126 G After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: A. Type of component B. Manufacturing plant C. SEL - selection code (bin): e.g.: J1 = code for luminous intensity group 3 = code for color group 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. D. Date code year / week E. Day code (e.g. 1: Moday) F. Batch no. L E V E L G. Total quantity CAUTION This bag contains MOISTURE –SENSITIVE DEVICES H. Company code 2a DRY PACKING 1. Shelf life in sealed bag 12 months at