VLMG21K2M1-GS08

VLMG21.. www.vishay.com Vishay Semiconductors Standard Mini SMD LED FEATURES • SMD LEDs with exceptional brightness • Luminous intensity categorized • Compatible with automatic placement equipment • EIA and ICE standard package • IR reflow soldering • Available in 8 mm tape • Low profile package • Non-diffused lens: excellent for coupling to light pipes and backlighting • Low power consumption • Luminous intensity ratio in one packaging IVmax./IVmin. ≤ 1.6 • Preconditioning according to JEDEC® level 2a 19226 DESCRIPTION The MiniLED series has been designed in a small white SMT package. The feature of the device is the very small package 2.3 mm x 1.3 mm x 1.4 mm. The MiniLED is an obvious solution for small-scale, high-power products that are expected to work reliably in an arduous environment. This is often the case in automotive and industrial application of course. • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Telecommunication: indicator and backlighting telephone and fax • Indicator and backlight for audio and video equipment • Indicator and backlight in office equipment • Flat backlight for LCDs, switches, and symbols • General use PRODUCT GROUP AND PACKAGE DATA • • • • unit Product group: LED Package: SMD MiniLED Product series: standard Angle of half intensity: ± 60° in PARTS TABLE PART COLOR LUMINOUS INTENSITY WAVELENGTH FORWARD VOLTAGE at IF at IF at IF (mcd) (nm) (V) TECHNOLOGY (mA) (mA) (mA) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. VLMG21K1L2-GS08 Green 7.1 12 18 10 562 572 575 10 - 2.1 2.8 10 VLMG21J2L1-GS08 Green 5.6 11.5 14 10 562 572 575 10 - 2.1 2.8 10 GaP on GaP GaP on GaP VLMG21J2M1-GS08 Green 5.6 12 22.4 10 562 572 575 10 - 2.1 2.8 10 GaP on GaP ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMG21.. PARAMETER TEST CONDITION SYMBOL VALUE VR 6 V Tamb ≤ 74 °C IF 20 mA tp ≤ 10 μs IFSM 0.34 A PV 56 mW Reverse voltage (1) DC forward current Surge forward current Power dissipation Junction temperature Operating temperature range Thermal resistance junction to ambient Tj +100 °C Tamb -40 to +100 °C °C Tstg -40 to +100 t≤5s Tsd 260 °C Mounted on PC board (pad size > 5 mm2) RthJA 480 K/W Storage temperature range Soldering temperature UNIT Note (1) Driving the LED in reverse direction is suitable for a short term application Rev. 1.8, 01-Feb-2022 Document Number: 81750 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMG21.. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMG21.., GREEN PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT IF = 10 mA VLMG21J2L1 IV 5.6 11.5 14 mcd IF = 10 mA VLMG21J2M1 IV 5.6 12 22.4 mcd IF = 10 mA VLMG21K1L2 IV 7.1 12 18 mcd Luminous intensity (1) Dominant wavelength IF = 10 mA λd 562 572 575 nm Peak wavelength IF = 10 mA λp - 565 - nm Angle of half intensity IF = 10 mA ϕ - ± 60 - ° Forward voltage IF = 10 mA VF - 2.1 2.8 V VR = 6 V IR - - 10 μA VR = 0 V, f = 1 MHz Cj - 15 - pF Reverse current Junction capacitance Note (1) In one packing unit I Vmax./IVmin. ≤ 1.6 LUMINOUS INTENSITY CLASSIFICATION GROUP COLOR CLASSIFICATION LIGHT INTENSITY (mcd) GREEN STANDARD OPTIONAL MIN. MAX. J 2 5.6 7.1 MIN. MAX. 1 7.1 9.0 3 562 565 2 9.0 11.2 4 564 567 1 11.2 14.0 5 566 569 2 14.0 18.0 6 568 571 1 18.0 22.4 7 570 573 8 572 575 K L M GROUP Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable DOM. WAVELENGTH (nm) Note • Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of ± 1 nm CROSSING TABLE VISHAY OSRAM VLMG21J2L1 LGM670J2L1 VLMG21J2M1 LGM670J2M1 VLMG21K1L2 LGM670K1L2 TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 20 1000 10 100 0 IVrel - Relative Luminous Intensity 0° 10000 1st line 2nd line 2nd line IF - Forward Current (mA) Axis Title 30 10° 20° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 80° 10 0 20 40 60 80 Tamb - Ambient Temperature (°C) 2nd line Fig. 1 - Forward Current vs. Ambient Temperature Rev. 1.8, 01-Feb-2022 0.6 100 0.4 0.2 0 0.2 0.4 0.6 19903 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Document Number: 81750 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMG21.. www.vishay.com Vishay Semiconductors Axis Title Axis Title 1.0 10000 0.7 1000 1st line 2nd line 0.6 0.5 0.4 100 0.3 0.2 0.1 10 0 500 550 600 650 1.5 1000 1st line 2nd line Green 0.8 2nd line IVrel - Relative Luminous Intensity Green 0.9 2nd line IVrel - Relative Intensity 10000 2.0 1.0 100 0.5 0 700 10 -40 -20 0 40 60 80 100 λ - Wavelengths (nm) 2nd line Tamb - Ambient Temperature (°C) 2nd line Fig. 3 - Relative Intensity vs. Wavelength Fig. 6 - Relative. Luminous Intensity vs. Ambient Temperature Axis Title Axis Title 10000 1st line 2nd line 1000 100 1 10 1.0 1.5 2.0 2.5 3.0 Green 1.05 1000 1st line 2nd line Green 10 10000 1.10 2nd line VF,rel - Relative Forward Voltage (V) 100 2nd line IF - Forward Current (mA) 20 1.00 100 0.95 0.90 3.5 10 -40 -20 0 20 40 60 80 100 VF - Forward Voltage (V) 2nd line Tamb - Ambient Temperature (°C) 2nd line Fig. 4 - Forward Current vs. Forward Voltage Fig. 7 - Relative Forward Voltage vs. Ambient Temperature Axis Title 10000 100 1000 Green 10 1st line 2nd line 2nd line IV rel - Relative Luminous Intensity 1000 1 100 0.1 0.01 10 1 10 100 IF - Forward Current (mA) 2nd line Fig. 5 - Relative Luminous Intensity vs. Forward Current Rev. 1.8, 01-Feb-2022 Document Number: 81750 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMG21.. www.vishay.com Vishay Semiconductors SOLDERING PROFILE IR Reflow Soldering Profile for Lead (Pb)-free Soldering Preconditioning acc. to JEDEC level 3 300 Temperature (°C) max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 0 0 50 100 150 Time (s) 19885-1 200 250 300 max. 2 cycles allowed Fig. 8 - Vishay Lead (Pb)-free Reflow Soldering Profile (according to J-STD-020) PACKAGE DIMENSIONS in millimeters 2.2 ± 0.1 1.4 ± 0.1 (1.2) 0.1 ± 0.05 0.7 ± 0.1 1.3 ± 0.1 2.05 ± 0.1 0.9 ± 0.1 0.4 ± 0.1 Not indicated tolerances ± 0.2 Cathode mark (0.9) Proposed pad layout (for reference only) 0.8 (1.5) 2.8 Area not flat 1 0.8 technical drawings according to DIN specifications Solder resist Drawing-No.: 6.541-5069.01-4 Issue: 2; 24.11.14 Rev. 1.8, 01-Feb-2022 Cu.area > 5 mm2 Document Number: 81750 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMG21.. www.vishay.com Vishay Semiconductors REEL DIMENSIONS in millimeters 16938 Rev. 1.8, 01-Feb-2022 Document Number: 81750 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMG21.. www.vishay.com Vishay Semiconductors TAPE DIMENSIONS in millimeters 16939 LEADER AND TRAILER DIMENSIONS in millimeters Trailer no devices Leader devices no devices End Start min. 200 min. 400 96 11818 Note • GS08 = 3000 pcs Rev. 1.8, 01-Feb-2022 Document Number: 81750 6 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMG21.. www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL COVER TAPE PEEL STRENGTH According to DIN EN 60286-3 0.1 N to 1.3 N A N B C D 300 mm/min ± 10 mm/min 165° to 180° peel angle LABEL E F G H I K L Standard bar code labels for finished goods M The standard bar code labels are product labels and used for identification of goods. The finished goods are packed in final packing area. The standard packing units are labeled with standard bar code labels before transported as finished goods to warehouses. The labels are on each packing unit and contain Vishay Semiconductor GmbH specific data. A. 2D barcode B. Part No: Vishay part number C. QTY: quantity D. SelCode: selection bin code E. Country of origin F. PTC: production plant code G. Termination finish H. Region code I. Serial#: serial number K. Batch Number: year, week, country code, plant code L. SL: storage location M. Environmental Symbols: RoHS, lead (Pb)-free, halogen free N. Lot numbers VISHAY SEMICONDUCTOR GmbH STANDARD BAR CODE PRODUCT LABEL (finished goods) PLAIN WRITTING Item-description ABBREVIATION LENGTH - 18 Item-number INO 8 Selection-code SEL 3 LOT-/serial-number BATCH 10 COD 3 (YWW) Plant-code PTC 2 Quantity QTY 8 Accepted by ACC - Packed by PCK - MIXED CODE - xxxxxxx+ Company logo TYPE LENGTH Data-code Mixed code indicator Origin LONG BAR CODE TOP Item-number N 8 Plant-code N 2 Sequence-number X 3 Quantity N 8 Total length - 21 TYPE LENGTH Selection-code X 3 Data-code N 3 Batch-number X 10 Filter - 1 Total length - 17 SHORT BAR CODE BOTTOM Rev. 1.8, 01-Feb-2022 Document Number: 81750 7 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMG21.. www.vishay.com Vishay Semiconductors DRY PACKING ESD PRECAUTION The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag. Electrostatic sensitive devices warning labels are on the packaging. Aluminum bag VISHAY SEMICONDUCTORS STANDARD BAR CODE LABEL Label The Vishay Semiconductors standard bar code labels are printed at final packing areas. The labels are on each packing unit and contain Vishay Semiconductors specific data. Reel 15973 FINAL PACKING The sealed reel is packed into a cardboard box. A secondary cardboard box is used for shipping purposes. RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. L E V E L CAUTION This bag contains MOISTURE –SENSITIVE DEVICES 2a 1. Shelf life in sealed bag 12 months at