VLMO235U1V2-GS08

VLMS235.., VLMR235.., VLMK235.., VLMO235.., VLMY235.. www.vishay.com Vishay Semiconductors Power Mini SMD LED FEATURES • Utilizing latest advanced AlInGaP technology • Available in 8 mm tape • Luminous intensity and color categorized per packing unit • Luminous intensity ratio per packing unit IVmax./IVmin. ≤ 1.6 • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B • Preconditioning according to JEDEC® level 2a 19226 • IR reflow soldering DESCRIPTION • AEC-Q101 qualified The new MiniLED series has been designed in a small white SMT package. The feature of the device is the very small package 2.3 mm x 1.3 mm x 1.4 mm. The MiniLED is an obvious solution for small-scale, high-power products that are expected to work reliably in an arduous environment. This is often the case in automotive and industrial application. • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Traffic signals and signs • Interior and exterior lighting • Dashboard illumination PRODUCT GROUP AND PACKAGE DATA • Indicator and backlighting purposes for audio, video, LCDs switches, symbols, illuminated advertising etc. • Product group: LED • Product series: power • Package: SMD MiniLED • Angle of half intensity: ± 60° PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) at IF (mA) MIN. TYP. MAX. WAVELENGTH (nm) FORWARD VOLTAGE (V) at IF (mA) MIN. TYP. MAX. at IF TECHNOLOGY (mA) MIN. TYP. MAX. VLMS235S2U1-GS08 Super red 224 370 560 20 626 630 639 20 1.8 2.1 2.6 20 VLMR235T2V1-GS08 Red 355 520 900 20 619 625 631 20 1.8 2.1 2.6 20 AlInGaP on Si AlInGaP on Si VLMK235T2V1-GS08 Amber 355 550 900 20 611 616 622 20 1.8 2.0 2.6 20 AlInGaP on Si VLMO235U1V2-GS08 Soft orange 450 650 1120 20 600 605 611 20 1.8 2.0 2.6 20 AlInGaP on Si VLMO235U2V2-35-08 Soft orange 560 700 1120 20 602 605 609 20 1.8 2.0 2.6 20 AlInGaP on Si VLMY235T2V1-GS08 Yellow 355 520 900 20 583 589 594 20 1.8 2.1 2.6 20 AlInGaP on Si ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMS235.., VLMR235.., VLMK235.., VLMO235.., VLMY235.. PARAMETER TEST CONDITION SYMBOL VALUE Not designed for reverse operation VR - V Tamb ≤ 60 °C (480 K/W) IF 50 mA Power dissipation PV 130 mW Junction temperature Tj 125 °C Tamb -40 to +100 °C Tstg -40 to +100 °C RthJA 480 K/W Reverse voltage (1) DC Forward current Operating temperature range Storage temperature range Thermal resistance junction-to-ambient Mounted on PC board (pad size > 16 mm2) UNIT Note (1) Driving the LED in reverse direction is suitable for a short term application only Rev. 1.0, 03-Aug-17 Document Number: 84589 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS235.., VLMR235.., VLMK235.., VLMO235.., VLMY235.. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMS235.., SUPER RED PARAMETER Luminous intensity TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMS235S2U1 IV 224 370 560 mcd φV/IV - 3 - mlm/mcd Luminous flux/luminous intensity UNIT Dominant wavelength IF = 20 mA λd 626 630 639 nm Peak wavelength IF = 20 mA λp - 639 - nm Spectral bandwidth at 50 % Irel max. IF = 20 mA Δλ - 18 - nm deg Angle of half intensity IF = 20 mA ϕ - ± 60 - Forward voltage IF = 20 mA VF 1.8 2.1 2.6 V Reverse current VR = 5 V IR - 0.01 10 μA OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMR235.., RED PARAMETER Luminous intensity TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMR235T2V1 IV 355 520 900 mcd φV/IV - 3 - mlm/mcd Luminous flux/luminous intensity UNIT Dominant wavelength IF = 20 mA λd 619 625 631 nm Peak wavelength IF = 20 mA λp - 632 - nm Spectral bandwidth at 50 % Irel max. IF = 20 mA Δλ - 18 - nm deg Angle of half intensity IF = 20 mA ϕ - ± 60 - Forward voltage IF = 20 mA VF 1.8 2.1 2.6 V Reverse current VR = 5 V IR - 0.01 10 μA OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMK235.., AMBER PARAMETER Luminous intensity TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMK235T2V1 IV 355 550 900 mcd φV/IV - 3 - mlm/mcd Luminous flux/luminous intensity UNIT Dominant wavelength IF = 20 mA λd 611 616 622 nm Peak wavelength IF = 20 mA λp - 622 - nm Spectral bandwidth at 50 % Irel max. IF = 20 mA Δλ - 18 - nm Angle of half intensity IF = 20 mA ϕ - ± 60 - deg Forward voltage IF = 20 mA VF 1.8 2.0 2.6 V Reverse current VR = 5 V IR - 0.01 10 μA OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMO235.., SOFT ORANGE PARAMETER Luminous intensity TEST CONDITION IF = 20 mA PART VLMO235U1V2 VLMO235U2V2-35 SYMBOL IV φV/IV Luminous flux/luminous intensity VLMO235U1V2 λd Dominant wavelength IF = 20 mA Peak wavelength IF = 20 mA λp VLMO235U2V2-35 MIN. TYP. MAX. 450 650 1120 560 700 1120 UNIT mcd - 3 - 600 605 611 mlm/mcd nm 602 605 609 nm - 611 - nm Spectral bandwidth at 50 % Irel max. IF = 20 mA Δλ - 17 - nm Angle of half intensity IF = 20 mA ϕ - ± 60 - deg Forward voltage IF = 20 mA VF 1.8 2.0 2.6 V Reverse current VR = 5 V IR - 0.01 10 μA Rev. 1.0, 03-Aug-17 Document Number: 84589 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS235.., VLMR235.., VLMK235.., VLMO235.., VLMY235.. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMY235.., YELLOW PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMY235T2V1 IV 355 520 900 mcd φV/IV - 3 - mlm/mcd Luminous intensity Luminous flux/luminous intensity UNIT Dominant wavelength IF = 20 mA λd 583 589 594 nm Peak wavelength IF = 20 mA λp - 591 - nm Spectral bandwidth at 50 % Irel max. IF = 20 mA Δλ - 17 - nm deg Angle of half intensity IF = 20 mA ϕ - ± 60 - Forward voltage IF = 20 mA VF 1.8 2.1 2.6 V Reverse current VR = 5 V IR - 0.01 10 μA COLOR CLASSIFICATION DOMINANT WAVELENGTH (nm) GROUP AMBER SOFT ORANGE MIN. MAX. 1 611 618 2 614 622 YELLOW MIN. MAX. MIN. MAX. 600 603 583 586 3 602 605 585 588 4 604 607 587 590 5 606 609 589 592 6 608 611 591 594 Note • Wavelengths are tested at a current pulse duration of 25 ms LUMINOUS INTENSITY CLASSIFICATION GROUP LUMINOUS INTENSITY (mcd) CROSSING TABLE VISHAY VLMK235T2V1 OSRAM LAM67B-T2V1-1 STANDARD OPTIONAL MIN. MAX. S 2 224 280 VLMS235S2U1 LS M67F-S2U2-1 1 280 355 VLMO235U2V2-35 LO M67F-U2AB-24 2 355 450 VLMY235T2V1 LY M67F-T2V2-36 1 450 560 2 560 710 1 710 900 2 900 1120 T U V Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable Rev. 1.0, 03-Aug-17 Document Number: 84589 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS235.., VLMR235.., VLMK235.., VLMO235.., VLMY235.. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 100 1.2 80 Irel - Relative Intensity IF - Max. Permissible Forward Current (mA) 90 70 RthJA = 480 K/W 60 50 40 30 20 1.0 soft orange yellow red super red amber 0.8 0.6 0.4 0.2 10 0 540 560 580 600 620 640 660 680 0 0 25 50 75 100 125 Tamb - Ambient Temperature (°C) 22583 Fig. 4 - Relative Intensity vs. Wavelength Fig. 1 - Maximum Permissible Forward Current vs. Ambient Temperature 0° 10° 20° 100 0.9 50° 0.8 60° 70° red super red amber 2nd line IF - Forward Current (mA) 40° 1.0 soft orange ϕ - Angular Displacement IV rel - Relative Luminous Intensity 30° 0.7 λ - Wavelenght (nm) 22184 10 yellow 80° 1 0.6 0.4 0.2 1.7 0 1.9 2.1 2.3 2.5 2.7 V F - Forward Voltage (V) 2nd line 95 10319 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Fig. 5 - Forward Current vs. Forward Voltage Axis Title 2nd line IV rel - Relative Luminous Intensity IF - Forward Current (A) 0.12 0.10 0.08 tp/T = 0.005 0.05 0.5 0.06 0.04 0.02 0.00 10 10000 1 1000 0.1 100 0.01 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 17044 101 102 tp - Pulse Length (s) Fig. 3 - Forward Current vs. Pulse Length Rev. 1.0, 03-Aug-17 10 1 10 100 IF - Forward Current (mA) 2nd line Fig. 6 - Relative Luminous Intensity vs. Forward Current Document Number: 84589 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS235.., VLMR235.., VLMK235.., VLMO235.., VLMY235.. www.vishay.com Vishay Semiconductors Axis Title 2nd line ΔVF - Change of Forward Voltage (V) 0.5 10000 0.4 super red 0.3 red 1000 amber 0.2 soft orange 0.1 0 100 yellow -0.1 -0.2 -0.3 10 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 2nd line Fig. 7 - Change of Forward Voltage vs. Ambient Temperature IV rel - Relative Luminous Intensity 2.5 2.0 yellow soft orange amber red 1.5 1.0 super red 0.5 0 - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 22188 Δλd - Change Dominant Wavelength (nm) Fig. 8 - Relative Luminous Intensity vs. Ambient Temperature 10 8 yellow 6 soft orange 4 2 0 amber red super red -2 -4 -6 -8 - 40 - 20 22189 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 9 - Change of Dominant Wavelength vs. Ambient Temperature Rev. 1.0, 03-Aug-17 Document Number: 84589 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS235.., VLMR235.., VLMK235.., VLMO235.., VLMY235.. www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 2.2 ± 0.1 (1.2) 1.4 ± 0.1 0.1 ± 0.05 0.7 ± 0.1 1.3 ± 0.1 2.05 ± 0.1 0.9 ± 0.1 0.4 ± 0.1 Not indicated tolerances ± 0.2 Anode mark (0.9) Proposed pad layout (for reference only) 0.8 (1.5) 2.8 Area not flat 1 0.8 technical drawings according to DIN specifications Solder resist Drawing refers to following types: Drawing-No.: 6.541-5090.01-4 Issue: 4; 20.07.17 Cu-area > 5 mm2 Rev. 1.0, 03-Aug-17 Document Number: 84589 6 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS235.., VLMR235.., VLMK235.., VLMO235.., VLMY235.. www.vishay.com Vishay Semiconductors TAPE DIMENSIONS in millimeters 1.58 8° m ax . 4 1.75 4 2 1.5 7° ma x. 1.58 8 2.38 3.5 C A 0.254 1 Package mark technical drawings according to DIN specifications Drawing refers to following types: Mini - SMD - LED with reverse polarity: VLM. 233..., VLM. 235... Drawing-No.: 9.700-5381.01-4 Issue: 2; 20.07.17 LEADER AND TRAILER DIMENSIONS in millimeters Trailer no devices Leader devices no devices End Start min. 200 min. 400 96 11818 GS08 = 3000 pcs COVER TAPE PEEL STRENGTH LABEL According to DIN EN 60286-3 Standard bar code labels for finished goods 0.1 N to 1.3 N The standard bar code labels are product labels and used for identification of goods. The finished goods are packed in final packing area. The standard packing units are labeled with standard bar code labels before transported as finished goods to warehouses. The labels are on each packing unit and contain Vishay Semiconductor GmbH specific data. 300 mm/min ± 10 mm/min 165° to 180° peel angle Rev. 1.0, 03-Aug-17 Document Number: 84589 7 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS235.., VLMR235.., VLMK235.., VLMO235.., VLMY235.. www.vishay.com Vishay Semiconductors SOLDERING PROFILE FINAL PACKING The sealed reel is packed into a cardboard box. A secondary cardboard box is used for shipping purposes. IR Reflow Soldering Profile for Lead (Pb)-Free Soldering Preconditioning according to JEDEC level 2a 300 Temperature (°C) RECOMMENDED METHOD OF STORAGE max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 200 max. 30 s 150 max. 100 s max. 120 s • Storage temperature 10 °C to 30 °C 100 • Storage humidity ≤ 60 % RH max. max. ramp down 6 °C/s max. ramp up 3 °C/s 50 0 0 50 100 150 Time (s) 19885 200 250 300 After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: max. 2 cycles allowed Fig. 10 - Vishay Lead (Pb)-free Reflow Soldering Profile (according to J-STD-020) 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. BAR CODE PRODUCT LABEL (example) A An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. B C D L L E V E L CAUTION E I G F H M K A. 2D bar code B. Part number = Vishay part number C. QTY = Quantity D. Sel. code = selection code (binning) E. PTC = Code of manufacturing plant F. Batch = date code: year / week / plant code G. Region code H. SL = sales location I. Terminations finishing J. Lead (Pb)-free symbol K. Halogen-free symbol L. RoHS symbol This bag contains MOISTURE –SENSITIVE DEVICES 2a 1. Shelf life in sealed bag 12 months at