VLMPG31L1M2-GS08

VLMPG31L1M2 www.vishay.com Vishay Semiconductors Standard SMD LED PLCC-2 FEATURES • SMD LEDs with exceptional brightness • Luminous intensity categorized • Compatible equipment with automatic placement • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 948553 DESCRIPTION • Available in 8 mm tape This device has been designed to meet the increasing demand for surface mounting technology. • Low profile package • Non-diffused lens: excellent for coupling to light pipes and backlighting The package of the VLMPG31-series is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. • Low power consumption PRODUCT GROUP AND PACKAGE DATA • Preconditioning according to JEDEC® level 2a • Product group: LED • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B • Luminous intensity IVmax./IVmin. ≤ 1.6 • Package: SMD PLCC-2 ratio in one packaging unit • AEC-Q101 qualified • Product series: standard • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 • Angle of half intensity: ± 60° APPLICATIONS • Automotive: Backlighting in dashboards and switches • Telecommunication: telephone and fax Indicator and backlighting in • Indicator and backlight for audio and video equipment • Indicator and backlight in office equipment • Flat backlight for LCDs, switches, and symbols • General use PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) at IF (mA) MIN. TYP. MAX. VLMPG31L1M2-GS08 WAVELENGTH (nm) FORWARD VOLTAGE (V) at IF (mA) MIN. TYP. MAX. at IF TECHNOLOGY (mA) MIN. TYP. MAX. Pure green 11.2 18 28 20 555 559 565 20 - 2.0 2.6 20 AIlnGaP on GaAs VLMPG31L1M2-GS18 (1) Pure green 11.2 18 28 20 555 559 565 20 - 2.0 2.6 20 AIlnGaP on GaAs Note (1) Not for new designs Rev. 1.5, 27-Sep-2021 Document Number: 81653 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMPG31L1M2 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMPG31L1M2 PARAMETER TEST CONDITION SYMBOL VALUE UNIT VR 5 V mA Reverse voltage (1) DC forward current Tamb ≤ 85 °C IF 30 tp ≤ 10 μs IFSM 0.2 A PV 80 mW Surge forward current Power dissipation Tj 125 °C Tamb -40 to +100 °C Tstg -40 to +100 °C RthJA 400 K/W Junction temperature Operating temperature range Storage temperature range Thermal resistance junction to ambient Mounted on PC board (pad size > 16 mm2) Note (1) Driving LED in reverse direction is suitable for short term application OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMPG31L1M2, PURE GREEN PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) IF = 20 mA VLMPG31L1M2 IV 11.2 18 28 mcd Dominant wavelength IF = 20 mA λd 555 559 565 nm Peak wavelength IF = 20 mA λp - 565 - nm Angle of half intensity IF = 20 mA ϕ - ± 60 - ° Forward voltage IF = 20 mA VF - 2.0 2.6 V Reverse voltage IR = 10 μA VR 5 - - V Note (1) In one packing unit I Vmax./IVmin. ≤ 1.6 LUMINOUS INTENSITY CLASSIFICATION GROUP STANDARD COLOR CLASSIFICATION LIGHT INTENSITY (mcd) DOMINANT WAVELENGTH (nm) OPTIONAL MIN. MAX. 1 2 1 2 11.2 14.0 18.0 22.4 14.0 18.0 22.4 28.0 L M Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable Rev. 1.5, 27-Sep-2021 GROUP PURE GREEN MIN. MAX. 0 555 559 1 558 561 2 560 563 3 562 565 Note • Wavelengths are tested at a current pulse duration of 25 ms Document Number: 81653 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMPG31L1M2 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 100 40 IF - Forward Current (mA) IF - Forward Current (mA) 35 30 25 20 15 10 5 10 0 10 20 30 40 50 60 70 80 1 90 100 1 Tamb - Ambient Temperature (°C) 16615 95 10878 0° 10° 20° 40° 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement IV rel - Relative Luminous Intensity 30° 1.0 80° 0.6 0.4 0.2 1.5 2 2.5 3 VF - Forward Voltage (V) Fig. 4 - Forward Current vs. Forward Voltage Fig. 1 - Forward Current vs. Ambient Temperature IV rel - Relative Luminous Intensity 0 3.0 Pure green 2.5 2.0 1.5 1.0 0.5 0.0 - 50 0 95 10319 18616 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement - 25 0 25 50 75 100 Tamb - Ambient Temperature (°C) Fig. 5 - Relative Luminous Intensity vs. Ambient Temperature IV rel - Relative Luminous Intensity 1.2 Pure green 1.0 0.8 0.6 0.4 0.2 0.0 510 18648 530 550 570 590 610 λ - Wavelength (nm) Fig. 3 - Relative Luminous Intensity vs. Wavelength Rev. 1.5, 27-Sep-2021 Document Number: 81653 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMPG31L1M2 www.vishay.com Vishay Semiconductors 0.9 1.75 ± 0.1 PACKAGE DIMENSIONS in millimeters 0.8 technical drawings according to DIN specifications C A 2.2 2.8 ± 0.15 Pin identification Drawing-No.: 6.541-5067.01-4 Issue: 7; 12.03.14 Ø 2.4 3 + 0.15 Mounting Pad Layout Area covered with solderresist 4 2.6 (2.8) 1.2 1.6 (1.9) 4 Dimensions: reflow and vapor phase (wave soldering) Rev. 1.5, 27-Sep-2021 Document Number: 81653 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMPG31L1M2 www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM.3...-SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 10.4 8.4 120° 4.5 3.5 Adhesive tape 13.00 12.75 2.5 1.5 Component cavity 62.5 60.0 Identification Label: Vishay type group tape code production code quantity Blister tape 14.4 max. 321 329 18857 94 8670 Fig. 8 - Reel Dimensions - GS18 TAPING OF VLM.3... 3.5 3.1 SOLDERING PROFILE 2.2 2.0 IR Reflow Soldering Profile for Lead (Pb)-Free Soldering Preconditioning according to JEDEC level 2a 300 5.75 5.25 8.3 7.7 1.85 1.65 1.6 1.4 4.1 3.9 0.25 4.1 3.9 Max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 Temperature (°C) 3.6 3.4 4.0 3.6 200 Max. 30 s 150 Max. 120 s Max. 100 s 100 Max. ramp up 3 °C/s Max. ramp down 6 °C/s 50 2.05 1.95 94 8668 10 0 Fig. 6 - Tape Dimensions in mm for PLCC-2 0 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 50 100 150 200 Time (s) 19885 250 300 Max. 2 cycles allowed Fig. 9 - Vishay Lead (Pb)-free Reflow Soldering Profile (acc. to J-STD-020) TTW Soldering (according to CECC00802) 300 10.0 9.0 120° Lead temperature 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 200 235 °C to 260 °C First wave 100 °C to 130 °C 100 100 2 K/s 50 180 178 14.4 max. Rev. 1.5, 27-Sep-2021 10 0 948626-1 Fig. 7 - Reel Dimensions - GS08 ca. 5 K/s Forced cooling 0 94 8665 1000 ca. 2 K/s ca. 200 K/s 150 Full line: typical Dotted lines: process limits Second wave 1st line 2nd line 2.5 1.5 2nd line Temperature (°C) 250 4.5 3.5 10000 5s 50 100 150 200 250 Time (s) Fig. 10 - Double Wave Soldering of Opto Devices (all Packages) Document Number: 81653 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMPG31L1M2 www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 106 A H VISHAY 37 B C D E F G RECOMMENDED METHOD OF STORAGE • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering. 19788 A. Type of component B. Manufacturing plant C. SEL - selection code (bin): e.g.: K1 = code for luminous intensity group 4 = code for color group D. Date code year / week In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. E. Day code (e.g. 2: Tuesday) F. Batch no. G. Total quantity L E V E L H. Company code CAUTION This bag contains MOISTURE –SENSITIVE DEVICES DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. Aluminum bag 2a 1. Shelf life in sealed bag 12 months at