VLMR31Q2T1-GS08

VLMR31.. www.vishay.com Vishay Semiconductors High Intensity SMD LED PLCC-2 FEATURES • SMD LED with exceptional brightness • Luminous intensity and color categorized • Compatible equipment with automatic placement • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 • Available in 8 mm tape 19225 • Low profile package • Non-diffused lens: excellent for coupling to light pipes and backlighting DESCRIPTION • Low power consumption This device has been designed to meet the increasing demand for AlInGaP technology. • Luminous intensity IVmax./IVmin. ≤ 1.6 The package of the VLMR31.. is the PLCC-2. • Preconditioning according to JEDEC® level 2a ratio in one packaging unit • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRODUCT GROUP AND PACKAGE DATA • Product group: LED • Package: SMD PLCC-2 APPLICATIONS • Product series: standard • Automotive: backlighting in dashboards and switches • Angle of half intensity: ± 60° • Telecommunication: telephone and fax indicator and backlighting in • Indicator and backlight for audio and video equipment • Indicator and backlight in office equipment • Flat backlight for LCDs, switches, and symbols • General use PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) at IF (mA) MIN. TYP. MAX. WAVELENGTH (nm) at IF (mA) MIN. TYP. MAX. FORWARD VOLTAGE (V) at IF (mA) TECHNOLOGY MIN. TYP. MAX. VLMR31Q2T1-GS08 Amber 90 160 355 20 612 618 624 20 1.8 2.0 2.4 20 AllnGaP on GaAs VLMR31Q2T1-GS18 (1) Amber 90 160 355 20 612 618 624 20 1.8 2.0 2.4 20 AllnGaP on GaAs Note (1) Not for new designs Rev. 1.5, 24-Sep-2021 Document Number: 82419 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMR31.. www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C unless otherwise specified) VLMR31.. PARAMETER TEST CONDITION SYMBOL VALUE VR 5 V Tamb ≤ 85 °C IF 30 mA tp ≤ 10 μs Reverse voltage (1) DC forward current Surge forward current UNIT IFSM 0.7 A Power dissipation PV 80 mW Junction temperature Tj 125 °C Operating temperature range Tamb -40 to +100 °C Storage temperature range Tstg -40 to +100 °C RthJA 400 K/W Mounted on PC board (pad size > 16 mm2) Thermal resistance junction to ambient Note (1) Driving the LED in reverse direction is suitable for a short term application OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C unless otherwise specified) VLMR31.., AMBER PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) IF = 20 mA VLMR31Q2T1 IV 90 160 355 mcd Dominant wavelength IF = 20 mA VLMR31Q2T1 λd 612 618 624 nm Peak wavelength IF = 20 mA λp - 624 - nm Angle of half intensity IF = 20 mA ϕ - ± 60 - ° IF = 20 mA VF 1.8 2 2.4 V IR = 10 μA VR 5 - - V VR = 0 V, f = 1 MHz Cj - 15 - pF Forward voltage (2) Reverse voltage Junction capacitance Notes (2) In one packing unit I Vmax./IVmin. ≤ 1.6 (3) Forward voltage is tested at a current pulse of 10 ms and an accuracy of ± 0.1 V LUMINOUS INTENSITY CLASSIFICATION GROUP STANDARD CROSSING TABLE LIGHT INTENSITY (mcd) OPTIONAL MIN. 1 71 90 2 90 112 1 112 140 2 140 180 Q R S T MAX. 1 180 224 2 224 280 1 280 355 2 355 450 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable Rev. 1.5, 24-Sep-2021 VISHAY OSRAM VLMR31Q2T1 LA T676-Q2T1-24 COLOR CLASSIFICATION AMBER GROUP DOM. WAVELENGTH (nm) MIN. MAX. 2 612 616 3 616 620 4 620 624 Note • Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of ± 1 nm Document Number: 82419 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMR31.. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.2 IV rel - Relative Luminous Intensity 40 IF - Forward Current (mA) 35 30 25 20 15 10 5 amber 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0.0 0 10 20 30 40 50 60 70 80 90 100 570 580 590 600 610 620 630 640 650 660 670 Tamb - Ambient Temperature (°C) 16615 λ - Wavelength (nm) 20196 Fig. 1 - Forward Current vs. Ambient Temperature Fig. 4 - Relative Intensity vs. Wavelength 100 1000.00 IF - Forward Current (mA) 0.02 0.05 0.1 100.00 0.2 0.5 1 10.00 0.01 1.00 10.00 100.00 1 t p - Pulse Length (ms) 16620 95 10878 Fig. 2 - Forward Current vs. Pulse Length 0° 10° 2 2.5 3 20° 10 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 1.5 VF - Forward Voltage (V) Fig. 5 - Forward Current vs. Forward Voltage ϕ - Angular Displacement IV rel - Relative Luminous Intensity 10 1 0.10 80° I Vrel- Relative Luminous Intensity I FM - Forward Current (mA) tp /T = 0.01 amber 1 0.1 0.01 0.6 0.4 0.2 95 10319 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement Rev. 1.5, 24-Sep-2021 1 0 19109_1 10 100 IF - Forward Current (mA) Fig. 6 - Relative Luminous Intensity vs. Forward Current Document Number: 82419 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMR31.. Vishay Semiconductors 1.6 VF - Change of Forward Voltage (mV) I V rel - Relative Luminous Intensity www.vishay.com 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 10 95 10883 20 30 40 50 60 70 80 200 150 100 50 0 - 50 - 100 - 150 - 200 - 250 - 300 90 100 0 Tamb - Ambient Temperature (°C) 16636 Fig. 7 - Relative Luminous Intensity vs. Ambient Temperature 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 8 - Forward Voltage vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters 0.9 1.75 ± 0.1 3.5 ± 0.2 0.8 technical drawings according to DIN specifications C A 2.2 2.8 ± 0.15 Pin identification Drawing-No.: 6.541-5067.01-4 Issue: 7; 12.03.14 Ø 2.4 3 + 0.15 Mounting Pad Layout Area covered with solderresist 4 2.6 (2.8) 1.2 1.6 (1.9) 4 Dimensions: reflow and vapor phase (wave soldering) Rev. 1.5, 24-Sep-2021 Document Number: 82419 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMR31.. www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM3 - SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 10.4 8.4 120° 4.5 3.5 Adhesive tape 13.00 12.75 2.5 1.5 Blister tape Component cavity 62.5 60.0 Identification Label: Vishay type group tape code production code quantity 94 8670 14.4 max. 321 329 18857 Fig. 11 - Reel Dimensions - GS18 SOLDERING PROFILE TAPING OF VLM.3.. 3.5 3.1 IR Reflow Soldering Profile for Lead (Pb)-free Soldering 2.2 2.0 Preconditioning acc. to JEDEC level 3 300 5.75 5.25 Temperature (°C) 3.6 3.4 8.3 7.7 1.85 1.65 1.6 1.4 4.1 3.9 0.25 4.1 3.9 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 4.0 3.6 200 max. 30 s 150 max. 100 s max. 120 s 100 2.05 1.95 94 8668 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 Fig. 9 - Tape Dimensions in mm for PLCC-2 0 0 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 200 250 300 max. 2 cycles allowed Fig. 12 - Vishay Lead (Pb)-free Reflow Soldering Profile (according to J-STD-020) TTW Soldering (according to CECC00802) 300 10000 5s 63.5 60.5 2nd line Temperature (°C) 13.00 12.75 200 235 °C to 260 °C First wave 100 °C to 130 °C 100 100 2 K/s 14.4 max. 50 94 8665 Fig. 10 - Reel Dimensions - GS08 ca. 5 K/s Forced cooling 10 0 0 948626-1 1000 ca. 2 K/s ca. 200 K/s 150 Full line: typical Dotted lines: process limits Second wave 1st line 2nd line 250 2.5 1.5 180 178 150 Time (s) Lead temperature 4.5 3.5 Identification Label: Vishay type group tape code production code quantity 100 19885-1 10.0 9.0 120° 50 50 100 150 200 250 Time (s) Fig. 13 - Double Wave Soldering of Opto Devices (all packages) Rev. 1.5, 24-Sep-2021 Document Number: 82419 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMR31.. www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 106 A H VISHAY 37 B C D E F G RECOMMENDED METHOD OF STORAGE 20126 • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: A) Type of component B) Manufacturing plant C) SEL - selection code (bin): e.g.: J1 = code for luminous intensity group 3 = code for color group D) Date code year / week 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. E) Day code (e.g. 1: Monday) F) Batch no. G) Total quantity L E V E L CAUTION H) Company code This bag contains MOISTURE –SENSITIVE DEVICES DRY PACKING 2a 1. Shelf life in sealed bag 12 months at