VLMT3100-GS18

VLMT3100 www.vishay.com Vishay Semiconductors Low Current SMD LED PLCC-2 FEATURES • SMD LED with exceptional brightness • Compatible equipment with automatic placement • EIA and ICE standard package • Compatible with infrared, vapor phase and wave solder processes according to CECC • Available in 8 mm tape 19225 • Low profile package DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMT3100 is the PLCC-2 (equivalent to a size B tantalum capacitor). It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. • Non-diffused lens: excellent for coupling to light pipes and backlighting • Very low power consumption • Luminous intensity IVmax./IVmin. ≤ 1.6 ratio in one packaging unit • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS PRODUCT GROUP AND PACKAGE DATA • Telecommunication: telephone and fax • Product group: LED • Package: SMD PLCC-2 indicator and backlighting in • Indicator and backlight for audio and video equipment • Product series: Low current • Indicator and backlight for battery driven equipment • Angle of half intensity: ± 60° • Small indicator for outdoor applications • Indicator and backlight in office equipment • Flat backlight for LCDs, switches, and symbols • General use PARTS TABLE PART VLMT3100-GS08 Rev. 1.5, 21-Apr-2022 COLOR Red LUMINOUS INTENSITY (mcd) at IF (mA) MIN. TYP. MAX. 0.28 1.1 - 2 WAVELENGTH (nm) MIN. TYP. MAX. 612 618 625 FORWARD VOLTAGE (V) at IF (mA) 2 at IF TECHNOLOGY (mA) MIN. TYP. MAX. - 2.2 2.9 2 GaAsP on GaP Document Number: 81710 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMT3100 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMT3100 PARAMETER TEST CONDITION SYMBOL VALUE VR 6 V Tamb ≤ 90 °C IF 7 mA tp ≤ 10 μs IFSM 0.34 A PV 20 mW Reverse voltage (1) DC forward current Surge forward current Power dissipation Junction temperature UNIT Tj 100 °C Operating temperature range Tamb -40 to +100 °C Storage temperature range Tstg -40 to +100 °C t≤5s Tsd 260 °C Mounted on PC board (pad size > 16 mm2) RthJA 500 K/W Soldering temperature Thermal resistance junction to ambient Note (1) Driving the LED in reverse direction is suitable for short term application OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMT3100, RED PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) IF = 2 mA IV 0.28 1.1 - mcd Dominant wavelength IF = 2 mA λd 612 618 625 nm Peak wavelength IF = 2 mA λp - 635 - nm Angle of half intensity IF = 2 mA ϕ - ± 60 - ° Forward voltage IF = 2 mA VF - 2.2 2.9 V Reverse voltage IR = 10 μA VR 6 15 - V VR = 0 V, f = 1 MHz Cj - 50 - pF Junction capacitance Note (1) In one packing unit I Vmax./IVmin. ≤ 1.6 LUMINOUS INTENSITY CLASSIFICATION GROUP LUMINOUS INTENSITY (mcd) MIN. MAX. C1 0.28 0.36 C2 0.36 0.45 D1 0.45 0.56 D2 0.56 0.71 E1 0.71 0.90 E2 0.9 1.12 F1 1.12 1.4 F2 1.4 1.8 G1 1.8 2.24 G2 2.24 2.8 Rev. 1.5, 21-Apr-2022 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, singe wavelength groups will not be orderable. Document Number: 81710 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMT3100 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Axis Title 100 6 4 2 10000 1000 1st line 2nd line 8 2nd line IF - Forward Current (mA) IF - Forward Current (mA) 10 10 100 0 0 95 10842 20 40 60 80 1 100 10 1.0 Tamb - Ambient Temperature (°C) 1.5 2.0 2.5 3.0 3.5 VF - Forward Voltage (V) 2nd line Fig. 4 - Forward Current vs. Forward Voltage Fig. 1 - Forward Current vs. Ambient Temperature Axis Title 0° 10° 20° 100 10000 10 1000 1 100 50° 0.8 60° 70° 0.7 80° 0.6 0.4 0.2 1st line 2nd line 0.9 2nd line IV rel - Relative Luminous Intensity 40° 1.0 ϕ - Angular Displacement IV rel - Relative Luminous Intensity 30° 0.1 10 1 0 10 IF - Forward Current (mA) 2nd line 95 10319 Fig. 5 - Relative Luminous Intensity vs. Forward Current Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Axis Title Axis Title 10000 0.9 0.7 1000 0.6 1st line 2nd line 2nd line Irel - Relative Intensity 0.8 0.5 0.4 100 0.3 0.2 0.1 0 10 540 560 580 600 620 640 660 680 700 720 740 760 2nd line IV rel - Relative Luminous Intensity 2.5 10000 2.0 1000 1.5 1st line 2nd line 1.0 100 1.0 100 0.5 0 10 -40 -20 0 20 40 60 80 100 λ - Wavelengths (nm) 2nd line Tamb - Ambient Temperature (°C) 2nd line Fig. 3 - Relative Intensity vs. Wavelength Fig. 6 - Relative Luminous Intensity vs. Ambient Temperature Rev. 1.5, 21-Apr-2022 Document Number: 81710 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMT3100 www.vishay.com Vishay Semiconductors Axis Title 10000 1.05 1000 1st line 2nd line 2nd line VF,rel - Relative Forward Voltage (V) 1.10 1.00 100 0.95 0.90 10 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 2nd line Fig. 7 - Relative Forward Voltage vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters 0.9 1.75 ± 0.1 3.5 ± 0.2 0.8 technical drawings according to DIN specifications C A 2.2 2.8 ± 0.15 Pin identification Drawing-No.: 6.541-5067.01-4 Issue: 7; 12.03.14 Ø 2.4 3 + 0.15 Area covered with solderresist 4 2.6 (2.8) Recommended Footprint Mounting Pad Layout 1.2 1.6 (1.9) Rev. 1.5, 21-Apr-2022 4 Document Number: 81710 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMT3100 www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM.3-SERIES) SOLDERING PROFILE Adhesive tape IR Reflow Soldering Profile for Lead (Pb)-free Soldering Preconditioning acc. to JEDEC level 2a 300 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 Temperature (°C) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 Blister tape 0 0 50 100 150 Time (s) 200 250 300 max. 2 cycles allowed 19885-3 Fig. 10 - Vishay Lead (Pb)-free Reflow Soldering Profile (according to J-STD-020) Component cavity 94 8670 TTW Soldering (according to CECC00802) TAPING OF VLM.3... 300 2.2 2.0 Lead temperature 4.0 3.6 8.3 7.7 2nd line Temperature (°C) 250 5.75 5.25 3.6 3.4 200 235 °C to 260 °C First wave 4.1 3.9 ca. 2 K/s 100 100 50 0.25 2.05 1.95 ca. 5 K/s Forced cooling 10 0 94 8668 Fig. 8 - Tape Dimensions in mm for PLCC-2 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 2.5 1.5 50 100 150 200 250 Time (s) Fig. 11 - Double Wave Soldering of Opto Devices (all Packages) 10.0 9.0 120° 4.5 3.5 0 948626-1 1000 100 °C to 130 °C 2 K/s 4.1 3.9 Full line: typical Dotted lines: process limits Second wave ca. 200 K/s 150 1.85 1.65 1.6 1.4 10000 5s 1st line 2nd line 3.5 3.1 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 180 178 14.4 max. 94 8665 Fig. 9 - Reel Dimensions - GS08 Rev. 1.5, 21-Apr-2022 Document Number: 81710 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMT3100 www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) RECOMMENDED METHOD OF STORAGE A N B C D Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. E F G H I K L M After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: A. 2D barcode B. Part No: Vishay part number 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. C. QTY: quantity D. SelCode: selection bin code E. Country of origin F. PTC: production plant code An EIA JEDEC® standard JESD22-A112 level 2a label is included on all dry bags. G. Termination finish H. Region code I. Serial#: serial number K. Batch Number: year, week, country code, plant code L. SL: storage location M. Environmental Symbols: RoHS, lead (Pb)-free, halogen free N. Lot numbers DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. Aluminum bag L E V E L CAUTION This bag contains MOISTURE –SENSITIVE DEVICES 2a 1. Shelf life in sealed bag 12 months at