VLMU3510-365-130

VLMU3510-365-130 www.vishay.com Vishay Semiconductors UV SMD LED with Silicone Lens FEATURES • Ceramic SMT package with silicone lens • Dimension (L x W x H) in mm: 3.45 x 3.45 x 2.1 • Forward current: up to 700 mA • Radiant power (typ.): 690 mW at 500 mA, 945 mW at 700 mA • Materials: - Die: InGaN - Resin: silicone (water clear) - Leads / terminations finish: gold plated (Au) • Grouping parameters: - Forward voltage - Radiant power - Peak wavelength • Reflow soldering method DESCRIPTION VLMU3510-365-130 is a ceramic based high power UV LED with silicone lens for long life time. The package size is 3.45 mm x 3.45 mm and the radiant power up to 835 mW at 500 mA in a wavelength range of 362.5 nm to 370 nm. • MSL 3 according to J-STD-020 • Packaging: MOQ = 1000 pieces; 12 mm tape with 500 pieces per reel, Ø 180 mm (7") PRODUCT GROUP AND PACKAGE DATA • Product group: LED • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 • Package: SMD ceramic high power • Product series: high power UV LED • Angle of half intensity: ± 65° APPLICATIONS • Lead-finishing: Au • Industrial curing • Photocatalytic purification SAFETY ADVICES • Poster printing curing Depending on the mode of operation, these devices emit highly concentrated non visible ultraviolet light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC 62471 “Photobiological Safety of Lamps and Lamp Systems”. • Counterfeit money detector • Blood detector • Nail curing • Teeth curing PARTS TABLE PART COLOR VLMU3510-365-130 Ultraviolet RADIANT POWER (mW) MIN. TYP. MAX. 560 690 835 at IF (mA) WAVELENGTH (nm) MIN. TYP. MAX. 500 362.5 367 370 at IF (mA) FORWARD VOLTAGE at IF (V) TECHNOLOGY (mA) MIN. TYP. MAX. 500 3.2 4.0 4.4 500 InGaN ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMU3510-365-130 PARAMETER SYMBOL VALUE UNIT DC forward current IF 700 mA Power dissipation PV 3 W ESD 2000 V Tj +90 °C Operating temperature range Tamb -40 to +85 °C Storage temperature range Tstg -55 to +90 °C Solder temperature Tsol 260 °C Electrostatic discharge Junction temperature TEST CONDITION HBM: MIL-STD-883 C 3B Document Number: 84363 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.0, 12-Apr-16 VLMU3510-365-130 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMU3510-365-130, ULTRAVIOLET PARAMETER Forward voltage TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IF = 500 mA VF 3.2 4.0 4.4 V - 490 - 560 690 835 - 945 - IF = 350 mA Radiant power IF = 500 mA φe IF = 700 mA IF = 350 mA Radiant intensity IF = 500 mA le IF = 700 mA - 160 - - 230 - - 315 - mW mW/sr Peak wavelength IF = 500 mA λp 362.5 367 370 nm Angle of half intensity IF = 500 mA ϕ - ± 65 - deg RthJC - 5.1 - K/W Thermal resistance junction to case Note • Tolerances: ± 11 % for φe, ± 0.1 V for VF, ± 3 nm for λp. RADIANT POWER CLASSIFICATION (IF = 500 mA) GROUP MIN. MAX. GH 560 610 HI 610 665 IJ 665 720 JK 720 775 KL 775 835 UNIT mW PEAK WAVELENGTH CLASSIFICATION (IF = 500 mA) GROUP MIN. MAX. P3M2 362.5 365 P3N1 365 367.5 P3N2 367.5 370 UNIT nm FORWARD VOLTAGE CLASSIFICATION (IF = 500 mA) GROUP MIN. MAX. V1 3.2 3.6 V2 3.6 4.0 V3 4.0 4.4 UNIT V Note • In order to ensure availability, single groups for radiant intensity, wavelength, and forward voltage will not be orderable. Only one group for radiant intensity, wavelength, and forward voltage will be shipped in any one reel. MARKING EXAMPLE FOR SELECTION CODE ON LABEL Selection code: IJ-P3N1-V2 • IJ range: 665 mW to 720 mW • P3N1 range: 365 nm to 367.5 nm • V2 range: 3.6 V to 4.0 V Document Number: 84363 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.0, 12-Apr-16 VLMU3510-365-130 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Axis Title 100 10000 900 10000 RthJA = 10 °C/W RthJA = 15 °C/W 700 1000 600 500 400 100 300 200 100 80 70 1000 60 1st line 2nd line 800 2nd line Relative Spectral Power (%) 90 1st line 2nd line 50 40 100 30 20 10 0 0 10 0 20 40 60 80 100 120 10 300 325 350 375 400 425 450 Tamb - Ambient Temperature (°C) 2nd line Wavelength (nm) 2nd line Fig. 1 - Maximum Forward Current vs. Ambient Temperature Fig. 4 - Relative Spectral Power vs. Wavelength Axis Title Axis0° Title 10° 120 1000 100 80 60 100 40 20 2nd line Ie, rel - Relative Radiant Intensity 140 0 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 80° 10 0 100 200 300 400 500 600 700 0.6 0.4 0.2 0 IF - Forward Current (mA) 2nd line 1st line 2nd line Fig. 2 - Relative Radiant Power vs. Forward Current Fig. 5 - Relative Radiant Intensity vs. Angular Displacement Axis Title Axis Title 10000 1st line 2nd line 1000 400 300 100 200 100 0 10 0 1.0 2.0 3.0 4.0 5.0 2nd line Φe rel - Relative Radiant Flux 600 500 10000 1.2 1.0 1000 0.8 1st line 2nd line 700 2nd line IF - Forward Current (mA) 20° 10000 1st line 2nd line 2nd line Φe rel - Relative Radiant Power (%) 160 ϕ - Angular Displacement 2nd line 2nd line IF max. - Maximum Forward Current (mA) Axis Title 1000 0.6 100 0.4 0.2 0 10 0 20 40 60 80 100 VF - Forward Voltage (V) 2nd line Tamb - Ambient Temperature (°C) 2nd line Fig. 3 - Forward Current vs. Forward Voltage Fig. 6 - Relative Radiant Flux vs. Ambient Temperature Document Number: 84363 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.0, 12-Apr-16 VLMU3510-365-130 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 3.3 2.3 A C 3.3 Electrically neutral thermal pad 1.3 Technical drawings according to DIN specification. R1.53 2.13 ± 0.1 0 .1 5 0 .6 Not indicated tolerances ± 0.2 Recommended solder pad footprint 3.3 3.45 ± 0.1 2.3 A C 3 .3 3.45 ± 0.1 1.3 Anode mark Drawing-No.: 6.541-5112.01-4 Issue: prel; 27.01.16 WIRING Fig. 7 - Wiring Diagram Document Number: 84363 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.0, 12-Apr-16 VLMU3510-365-130 www.vishay.com Vishay Semiconductors TAPE AND REEL DIMENSIONS in millimeters MOQ: 1000 pieces (2 reels each with 500 pieces) Document Number: 84363 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.0, 12-Apr-16 VLMU3510-365-130 www.vishay.com Vishay Semiconductors SOLDERING PROFILE FINAL PACKING The sealed reel is packed into a cardboard box. A secondary cardboard box is used for shipping purposes. IR Reflow Soldering Profile for Lead (Pb)-free Soldering Preconditioning acc. to JEDEC level 3 300 Temperature (°C) RECOMMENDED METHOD OF STORAGE max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 200 max. 30 s 150 max. 100 s max. 120 s • Storage temperature 10 °C to 30 °C 100 • Storage humidity ≤ 60 % RH max. max. ramp down 6 °C/s max. ramp up 3 °C/s 50 0 0 50 100 150 Time (s) 19885-1 200 250 300 In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: max. 2 cycles allowed Fig. 8 - Vishay Lead (Pb)-free Reflow Soldering Profile (acc. to J-STD-020C) 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 24 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. BAR CODE PRODUCT LABEL (example only) A An EIA JEDEC® standard JESD22-A112 level 3 label is included on all dry bags. B C D L E a. b. c. d. e. f. g. h. i. j. k. l. After more than 168 h under these conditions moisture content will be too high for reflow soldering. I G F H M 3 K 2D barcode Vishay part number Quantity SEL = selection code (binning) Code of manufacturing plant Batch = date code: year/week/plant code Region code SL = sales location Terminations finishing Lead (Pb)-free symbol Halogen-free symbol RoHS symbol 168 h 17028-2 Example of JESD22-A112 level 3 label ESD PRECAUTION DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. Aluminum bag Label Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag. Electrostatic sensitive devices warning labels are on the packaging. VISHAY SEMICONDUCTORS STANDARD BAR CODE LABELS The Vishay Semiconductors standard bar code labels are printed at final packing areas. The labels are on each packing unit and contain Vishay Semiconductors specific data. Reel 15973 Document Number: 84363 6 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.0, 12-Apr-16 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000