VLPC0401A2J

VLPC0401A2J www.vishay.com Vishay Semiconductors High Brightness LED Power Module FEATURES • Metal core PCB: Al > 1 mm thickness • Single side/single layer PCB • Shiny white surface • 4 LED’s in a row • Conductive top layer: Cu (min. 18 μm) • Isolation layer prepreg (100 μm) • ESD withstand voltage: up to 2 kV according to JESD22-A114-B • Color binning • LM80 certified LEDs • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 22139 DESCRIPTION VLPC0401A2J is a metal core based high brightness LED power modules assembled with 4 white LED’s. Color temperature range of 5000 K to 7000 K. APPLICATIONS PRODUCT GROUP AND PACKAGE DATA • Reading lamp, table lamp • Product group: LED • General lighting application • Internal lighting in buildings • Tunnel lights • Package: LED module • Product series: power • Angle of half intensity: ± 80° PARTS TABLE PART VLPC0401A2J LUMINOUS FLUX (at IF = 700 mA typ.) ΦV = typ. 580 lm COLOR Cool white COLOR TEMPERATURE K 5000 to 7000 TECHNOLOGY InGaN ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLPC0401A2J PARAMETER Forward current Power dissipation Junction temperature Operating temperature range Storage temperature range Decomposition temperature of PCB (for cable assembly) TEST CONDITION Total 3 x 10 s SYMBOL IF Ptot Tj Tamb Tstg TD VALUE 700 10.8 120 - 40 to + 85 - 40 to + 85 350 UNIT mA W °C °C °C °C OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLPC0401A2J, COOL WHITE PARAMETER Luminous flux total (1) Color temperature Forward voltage Temperature coefficient of VF Temperature coefficient of ΦV TEST CONDITION IF = 700 mA IF = 700 mA IF = 700 mA IF = 350 mA IF = 350 mA SYMBOL ΦV TK VF TCVF TCΦV MIN. 500 5000 12.5 - TYP. 580 14 - 14 - 0.4 MAX. 7000 15.5 - UNIT lm K V mV/K %/K Notes • Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of ± 0.1 V. Luminous flux is measured at a current pulse duration of 25 ms and an accuracy of ± 11 %. (1) Calculated based on single LED unit. Rev. 1.1, 31-Oct-12 Document Number: 84151 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLPC0401A2J www.vishay.com Vishay Semiconductors COLOR RANGE AND COLOR BINNING VLPC0401A2J: 5000 K to 7000 K group 6P to 7R 0.38 0.37 7R 0.36 7Q 0.35 7P y - Coordinate 6R 0.34 Black body curve 6Q 0.33 0.32 6P 0.31 0.30 0.29 0.3 0.31 0.32 22138 0.33 0.34 x - Coordinate Fig. 1 - Chromaticity Coordinates of Colorgroups CHROMATICITY COORDINATED GROUPS FOR COOL WHITE SMD LED GROUP 6P 7P X Y 0.309 0.302 0.307 0.311 0.317 0.331 0.317 X Y 0.307 0.311 0.305 0.322 0.317 0.346 0.318 0.317 0.317 0.318 0.317 0.331 0.334 0.365 0.338 0.360 Rev. 1.1, 31-Oct-12 GROUP 6Q 7Q GROUP X Y 0.305 0.322 0.304 0.329 0.317 0.356 0.331 0.317 0.346 0.317 0.331 0.317 0.356 0.317 0.356 0.322 0.365 0.334 0.365 0.330 0.373 0.317 0.331 0.334 0.365 6R 7R Document Number: 84151 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLPC0401A2J www.vishay.com Vishay Semiconductors PCB BASIC DESIGN DIMENSIONS in millimeters EMISSION CHARACTERISTIC • Metal core PCB: Al (minimum 1000 μm - thickness) • Conductive pattern Cu minimum 18 μm • Free of burrs • RoHS ccompliant • Halogen-free • Solder resist on top side • Shiny white surface (glossy-white Taiyo-PSR 2000) • Galvanic of solder pads and backside pure matte Sn (0.8 μm to 1.2 μm) • Assembled with 4 high brightness power LEDs. LED position accuracy ± 0.3 IV rel - Relative Luminous Intensity • Prepreg minimum 63 μm 0° 10° 20° 30° 40° 1.0 50° 0.9 60° 0.8 70° ϕ - Angular Displacement PCB CHARACTERISTICS 80° 0.7 22143-1 0.6 0.4 0.2 0 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Rev. 1.1, 31-Oct-12 Document Number: 84151 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLPC0401A2J www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL A D E B C 20613 A. Type of component B. Manufacturing plant C. SEL - selection code (bin): X = color group D. Batch: 200707 = year 2007, week 07 PH19 = plant code E. Total quantity Note • 32 PCB’s per box, minimum order quantity 32 Rev. 1.1, 31-Oct-12 Document Number: 84151 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000