VLWY9932

VLWY9930, VLWY9932 www.vishay.com Vishay Semiconductors TELUX LED FEATURES • High luminous flux • Supreme heat dissipation: RthJP is 90 K/W • High operating temperature: Tamb = -40 °C to +110 °C • Meets SAE and ECE color requirements for the automobile industry for color red • Packed in tubes for automuioatic insertion • Luminous flux, forward voltage, and color categorized for each tube • Small mechanical tolerances allow precise usage of external reflectors or lightguides • Compatible with wave solder processes according to CECC 00802 • ESD-withstand voltage: up to 2 kV according to JESD 22-A114-B • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 19232 DESCRIPTION The TELUX series is a clear, non diffused LED for applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing highly developed super bright, AllnGaP technology. The supreme heat dissipation of TELUX allows applications at high ambient temperatures. All packing units are binned for luminous flux, forward voltage, and color to achieve the most homogeneous light appearance in application. APPLICATIONS • Exterior lighting • Tail-, stop-, and turn signals of motor vehicles • Traffic light and signs PRODUCT GROUP AND PACKAGE DATA • • • • Product group: LED Package: TELUX Product series: power Angle of half intensity: ± 45° PARTS TABLE PART LUMINOUS FLUX (mlm) COLOR MIN. TYP. MAX. at IF (mA) WAVELENGTH (nm) MIN. TYP. MAX. at IF (mA) FORWARD VOLTAGE (V) MIN. TYP. MAX. at IF (mA) TECHNOLOGY VLWY9930 Yellow 4000 8500 12 200 70 585 592 597 70 1.83 2.2 3.03 70 AlInGaP on Si VLWY9932 (1) Yellow 6000 9000 12 200 70 587 592 597 70 1.95 2.2 2.67 70 AlInGaP on Si Note (1) Not for new designs ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLWY9930, VLWY9932 PARAMETER TEST CONDITION SYMBOL VALUE VR 10 V Tamb ≤ 85 °C IF 70 mA tp ≤ 10 μs IFSM 0.1 A PV 212 mW Reverse voltage (1) DC forward current Surge forward current Power dissipation Junction temperature UNIT Tj 125 °C Operating temperature range Tamb -40 to +110 °C Storage temperature range Tstg -40 to +110 °C Tsd 260 °C RthJA 200 K/W RthJP 90 K/W Soldering temperature Thermal resistance junction to ambient t ≤ 5 s, 1.5 mm from body preheat temperature 100 °C / 30 s With anode heatsink of 70 mm2 Thermal resistance junction to pin Note (1) Driving the LED in reverse direction is suitable for a short term application Document Number: 81815 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.8, 27-Sep-2021 VLWY9930, VLWY9932 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLWY9930, VLWY9932, YELLOW PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT VLWY9930 φV 4000 8500 12 200 mlm VLWY9932 (1) φV 6000 9000 12 200 mlm IV/φV - 0.7 - mcd/mlm VLWY9930 λd 585 592 597 nm VLWY9932 (1) λd 587 592 597 nm Total flux IF = 70 mA, RthJA = 200 K/W Luminous intensity/total flux IF = 70 mA, RthJA = 200 K/W Dominant wavelength IF = 70 mA, RthJA = 200 K/W Peak wavelength IF = 70 mA, RthJA = 200 K/W λp - 595 - nm Angle of half intensity IF = 70 mA, RthJA = 200 K/W ϕ - ± 45 - ° Total included angle 90 % of total flux captured ϕ0.9 V - 100 - ° VF 1.83 2.2 3.03 V V IF = 70 mA, RthJA = 200 K/W Forward voltage VLWY9930 VLWY9932 (1) VF 1.95 2.2 2.67 VR 10 20 - V IF = 70 mA TCλdom - 0.1 - nm/K IF = 70 mA, T > -25 °C TCVF - -2 - mV/K Reverse voltage Temperature coefficient of λdom Temperature coefficient of VF Note (1) Not for new designs LUMINOUS FLUX CLASSIFICATION GROUP FORWARD VOLTAGE CLASSIFICATION LUMINOUS FLUX (mlm) MIN. MAX. H 4000 6100 GROUP FORWARD VOLTAGE (V) MIN. MAX. Y 1.83 2.07 I 5000 7300 Z 1.95 2.19 K 6000 9700 0 2.07 2.31 L 7000 12 200 1 2.19 2.43 2 2.31 2.55 3 2.43 2.67 4 2.55 2.79 5 2.67 2.91 6 2.79 3.03 Note • Luminous flux is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each tube (there will be no mixing of two groups on each tube). In order to ensure availability, single brightness groups will be not orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one tube. In order to ensure availability, single wavelength groups will not be orderable Note • Voltages are tested at a current pulse duration of 1 ms COLOR CLASSIFICATION GROUP DOMINANT WAVELENGTH (nm) MIN. MAX. 0 585 588 1 587 591 2 589 594 3 592 597 Note • Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of ± 1 nm Document Number: 81815 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.8, 27-Sep-2021 VLWY9930, VLWY9932 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 100 100 90 80 % Total Luminous Flux IF - Forward Current (mA) 80 60 40 20 70 60 50 40 30 20 RthJA = 200 K/W 10 0 0 0 20 40 60 80 100 120 0 Tamb - Ambient Temperature (°C) 15983_1 0.12 230 0.10 220 75 100 125 210 0.005 0.05 0.5 0.08 50 Fig. 4 - Percentage Total Luminous Flux vs. Total Included Angle for 90° Emission Angle RthJA (K/W) I F - Forward Current (A) Fig. 1 - Forward Current vs. Ambient Temperature 25 Total Included Angle (Degrees) 16201 0.06 0.04 200 190 180 0.02 170 0.00 10 -5 160 10 -4 10 -3 10 -2 10 -1 100 101 102 0 tp - Pulse Length (ms) 16731 21039 10° 100 150 200 250 300 Anode Padsize (mm2) Fig. 5 - Thermal Resistance Junction Ambient vs. Anode Padsize Fig. 2 - Forward Current vs. Pulse Length 0° 50 20° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement IV rel. - Relative Luminous Intensity 30° 80° 0.6 0.4 0.2 0 16200 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement Document Number: 81815 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.8, 27-Sep-2021 VLWY9930, VLWY9932 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters A Anode marking technical drawings according to DIN specifications Area not plane 5° 1.35 ± 0.1 C R1.3 0.6 max. 2.65 ± 0.3 4.65 ± 0.3 7.75 ± 0.3 1.45 1.6 1.32 0.76 ± 0.1 0.4 ± 0.1 5.08 ± 0.3 1.55 ± 0.2 7.62 ± 0.3 6.55 5.08 ± 0.2 7.62 ± 0.3 Drawing-No.: 6.544-5392.01-4 Issue: 3; 27.02.15 Document Number: 81815 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.8, 27-Sep-2021 VLWY9930, VLWY9932 www.vishay.com Vishay Semiconductors FAN FOLD BOX DIMENSIONS in millimeters Label 600 45 16491 110 Label LABEL OF FAN FOLD BOX (example) A. Type of component 106 B. PTC = manufacturing plant E C. SEL - selection code (bin): e.g.: K2 = code for luminous intensity group 4 = code for color group F 37 D. Batch / date code year / week E. Total quantity F. Company code 21026 B C A G G. Code for lead (Pb)-free classification (e3) D EXAMPLE FOR TELUX TUBE LABEL DIMENSIONS in millimeters 90 52 A TLWR7600 PTC27 B C SELB10 D DC20000121 BN12345 E F PCS70 MNO G H 8 16490 A. Bar code B. Type of component C. Manufacturing plant D. SEL - selection code (bin): digit 1 - code for luminous flux group digit 2 - code for dominant wavelength group digit 3 - code for forward voltage group E. Date code F. Batch: no. G. Total quantity H. Company code Document Number: 81815 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.8, 27-Sep-2021 VLWY9930, VLWY9932 www.vishay.com Vishay Semiconductors TUBE WITH BAR CODE LABEL DIMENSIONS in millimeters Drawing-No.: 9.700-5223.0-4 Rev. 2; Date: 23.08.99 20438 Drawing Proportions not Scaled Document Number: 81815 6 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.8, 27-Sep-2021 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000