VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
www.vishay.com
Vishay Semiconductors
High Speed Optocoupler, 10 MBd, SOIC-8 Package
FEATURES
Single channel
NC
1
A 2
7 V
E
C 3
NC
• Choice of CMR performance of 15 kV/μs,
5 kV/μs, and 1 kV/μs
8 V
CC
4
6 VO
• High speed: 10 MBd typical
5 GND
• + 5 V CMOS compatibility
• Pure tin leads
VO0600T, VO0601T, VO0611T
• Guaranteed AC and DC performance over
temperature: - 40 °C to + 100 °C temp. range
Dual channel
18921-17
A1 1
8 VCC
C1
2
7 V
O1
C2
3
6 V
O2
A2
4
5 GND
• Meets IEC 60068-2-42 (SO2) and IEC 60068-2-43 (H2S)
requirements
• Low input current capability: 5 mA
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
VO0630T, VO0631T, VO0661T
18921-26
V
D E
APPLICATIONS
DESCRIPTION
• Microprocessor system M interface
The VO06xxT family are single and dual channel 10 MBd
optocoupler utilizing a high efficient input LED coupled with
an integrated optical photodiode IC detector. The detector
has an open drain NMOS-transister output, providing less
leakage compared to an open collector Schottky clamped
transister output. For the single channel type, an enable
function on pin 7 allows the detector to be strobed. The
internal shield provides a guaranteed common mode
transient immunity of 5 kV/μs for the VO0601T and VO0631T
and 15 kV/μs for the VO0611T and VO0661T. The use of a
0.1 μF bypass capacitor connected between pin 5 and 8 is
recommended.
• PLC, ATE input/output isolation
• Computer peripheral interface: SPI
• Digital fieldbus isolation: CC-Link, DeviceNet, profibus,
SDS
• High speed A/D and D/A conversion
• AC plasma display panel level shifting
• Multiplexed data transmission
• Digital control power supply
• Ground loop elimination
AGENCY APPROVALS
• UL1577, file no. E52744
• cUL-file no. E52744, equivalent to CSA bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
ORDERING INFORMATION
V
O
0
6
#
#
-
PART NUMBER
X
0
0
T
SIOC-8
TAPE AND
REEL
6.1 mm
1
PACKAGE OPTION
1 CHANNEL
AGENCY
CERTIFIED/PACKAGE
2 CHANNELS
CMR (kV/μs)
CMR (kV/μs)
UL, cUL
1
5
15
1
5
15
SOIC-8
VO0600T
VO0601T
VO0611T
VO0630T
VO0631T
VO0661T
UL, cUL, VDE
1
5
15
1
5
15
SOIC-8
-
VO0601-X001T
-
-
VO0631-X001T
-
Rev. 2.0, 25-Oct-12
Document Number: 84607
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
www.vishay.com
Vishay Semiconductors
TRUTH TABLE (positive logic)
ENABLE (1)
OUTPUT
On
H
L
Off
H
H
On
L
H
Off
L
H
On
NC
L
Off
NC
H
LED
Note
(1) Only applicable for single channel devices
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
Average forward current (single channel)
IF
20
mA
Average forward current (dual channel)
IF
15
mA
Reverse input voltage
VR
5
V
Enable input voltage (single channel)
VE
VCC + 0.5 V
V
Enable input current (single channel)
IE
5
mA
INPUT
IFSM
200
mA
Output power dissipation (single channel)
Surge current
t = 100 μs
Pdiss
35
mW
Output power dissipation
(per channel for dual channel)
Pdiss
25
mW
OUTPUT
Supply voltage
1 min maximum
Output current
Output voltage
VCC
7
V
IO
50
mA
VO
7
V
Output power dissipation (single channel)
Pdiss
85
mW
Output power dissipation
(per channel for dual channel)
Pdiss
60
mW
VISO
4000
VRMS
Tstg
- 55 to + 150
°C
Tamb
COUPLER
Isolation test voltage
t=1s
Storage temperature
Operating temperature
- 40 to + 100
°C
Lead solder temperature
for 10 s
260
°C
Solder reflow temperature (1)
for 1 min
260
°C
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) Refer to reflow profile for soldering conditions for surface mounted devices.
RECOMMENDED OPERATING CONDITION
PARAMETER
SYMBOL
MIN.
MAX.
UNIT
Operating temperature
Tamb
- 40
100
°C
Supply voltage
VCC
4.5
5.5
V
Input current low level
IFL
0
250
μA
Input current high level
IFH
5
15
mA
Output pull up resistor
RL
330
4K
Ω
Logic high enable voltage
VEH
2
VCC
V
Logic low enable voltage
VEL
0.0
0.8
V
5
-
Fanout
Rev. 2.0, 25-Oct-12
TEST CONDITION
RL = 1 kΩ
N
TYP.
Document Number: 84607
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
IF = 10 mA
VF
1.1
VR = 5 V
IR
1.4
1.7
V
0.01
10
μA
f = 1 MHz, VF = 0 V
CI
55
VE = 0.5 V, IF = 0 mA
ICCH
4.1
7
mA
VE = VCC, IF = 0 mA
ICCH
3.3
6
mA
IF = 10 mA
ICCH
6.5
12
mA
VE = 0.5 V, IF = 10 mA
ICCL
4
7
mA
VE = VCC, IF = 10 mA
ICCL
3.3
6
mA
IF = 10 mA
ICCL
6.5
12
mA
High level output current
VE = 2 V, VO = 5.5 V,
IF = 250 μA
IOH
0.002
1
μA
Low level output voltage
VE = 2 V, IF = 5 mA,
IOL (sinking) = 13 mA
VOL
0.2
0.6
V
Input threshold current
VE = 2 V, VO = 5.5 V,
IOL (sinking) = 13 mA
ITH
2.4
5
mA
INPUT
Input forward voltage
Reverse current
Input capacitance
pF
OUTPUT
High level supply current (single channel)
High level supply current (dual channel)
Low level supply current (single channel)
Low level supply current (dual channel)
High level enable current
IEH
- 0.6
- 1.6
mA
Low level enable current
IEL
- 0.8
- 1.6
mA
High level enable voltage
VEH
Low level enable voltage
VEL
2
V
0.8
V
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
SWITCHING CHARACTERISTICS
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Propagation delay time to high
output level
RL = 350 Ω, CL = 15 pF
tPLH
20
48
100
ns
Propagation delay time to low
output level
RL = 350 Ω, CL = 15 pF
tPHL
25
50
100
ns
ns
Pulse width distortion
RL = 350 Ω, CL = 15 pF
|tPHL - tPLH|
2.9
35
Propagation delay skew
RL = 350 Ω, CL = 15 pF
tPSK
8
40
Output rise time (10 to 90 %)
RL = 350 Ω, CL = 15 pF
tr
23
ns
Output fall time (90 to 10 %)
RL = 350 Ω, CL = 15 pF
tf
7
ns
Propagation delay time of
enable from VEH to VEL
RL = 350 Ω, CL = 15 pF,
VEL = 0 V, VEH = 3 V
tELH
12
ns
Propagation delay time of
enable from VEL to VEH
RL = 350 Ω, CL = 15 pF,
VEL = 0 V, VEH = 3 V
tEHL
11
ns
ns
Note
• Over recommended temperature (TA = - 40 °C to + 100 °C), VCC = 5 V, IF = 7.5 mA unless otherwise specified.
All typicals at TA = 25 °C, VCC = 5 V.
Rev. 2.0, 25-Oct-12
Document Number: 84607
3
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
www.vishay.com
Vishay Semiconductors
VCC
Single channel
Pulse gen.
Zo = 50 Ω
t f = t r = 5 ns
VCC 8
VE
7
VOUT
1
IF
2
Input IF
monitoring
node
RM
3
RL
Output VO
monitoring
node
6
4
GND
5
IF = 7.5 mA
IF = 3.75 mA
0 mA
Input IF
0.1 µF
bypass
VOH
1.5 V
VOL
Output VO
C L = 15 pF
t PHL
t PLH
The probe and Jig capacitances are included in C L
18964-2
Fig. 1 - Single Channel Test Circuit for tPLH, tPHL, tr and tf
Pulse gen.
Zo = 50 Ω
t f = t r = 5 ns
VCC
IF
Input
monitoring
node
RM
1
8
2
7
3
6
4
5
RL
0.1 µF
bypass
Output VO
monitoring
node
CL = 15 PF
18963-3
Fig. 2 - Dual Channel Test Circuit for tPLH, tPHL, tr and tf
Input VE
monitoring node
Pulse gen.
Zo = 50 Ω
t f = t r = 5 ns
1
7.5 mA
IF
VCC
Single channel
2
VCC 8
VE
7
VOUT
3
4
6
GND
RL
0.1 µF
bypass
Output VO
monitoring
node
Input VE
CL = 15 pF
Output VO
3V
1.5 V
tEHL
tELH
1.5 V
5
The probe and Jig capacitances are included in CL
18975-2
Fig. 3 - Single Channel Test Circuit for tEHL, tELH
Rev. 2.0, 25-Oct-12
Document Number: 84607
4
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
www.vishay.com
Vishay Semiconductors
COMMON MODE TRANSIENT IMMUNITY
PARAMETER
TEST CONDITION
SYMBOL
MIN.
|VCM| = 10 V, VCC = 5 V, IF = 0 mA,
VO(min) = 2 V, RL = 350 Ω, Tamb = 25 °C(1)
|CMH|
1000
|VCM| = 50 V, VCC = 5 V, IF = 0 mA,
VO(min) = 2 V, RL = 350 Ω, Tamb = 25 °C(2)
|CMH|
5000
10 000
V/μs
|VCM| = 1 kV, VCC = 5 V, IF = 0 mA,
VO(min) = 2 V, RL = 350 Ω, Tamb = 25 °C(3)
|CMH|
15 000
25 000
V/μs
|VCM| = 10 V, VCC = 5 V, IF = 7.5 mA,
VO(max) = 0.8 V, RL = 350 Ω, Tamb = 25 °C(1)
|CML|
1000
|VCM| = 50 V, VCC = 5 V, IF = 7.5 mA,
VO(max) = 0.8 V, RL = 350 Ω, Tamb = 25 °C(2)
|CML|
5000
10 000
V/μs
|VCM| = 1 kV, VCC = 5 V, IF = 7.5 mA,
VO(max) = 0.8 V, RL = 350 Ω, Tamb = 25 °C(3)
|CML|
15 000
25 000
V/μs
Common mode transient immunity
(high)
Common mode transient immunity
(low)
TYP.
MAX.
UNIT
V/μs
V/μs
Notes
(1) For VO0600T and VO0630T
(2) For VO0601T and VO0631T
(3) For VO0611T and VO0661T
VCC
IF
Single channel
1
B
A
VFF
2
VCC 8
VE
7
VOUT
3
6
4
5
GND
RL
0.1 µF
bypass
VCM (PEAK)
VCM 0 V
Output VO
monitoring
node
Switch AT A: IF = 0 mA
VO 5 V
VO 0.5 V
VO (min.)
Switch AT A: IF = 7.5 mA
VO (max.)
VCM
+
Pulse generator
ZO = 50 Ω
CMH
CML
18976-2
Fig. 4 - Single Channel Test Circuit for Common Mode Transient Immunity
IF
Dual channel
B
1
VCC 8
2
7
3
6
A
VFF
4
18977-1
GND
VCC
RL
0.1 µF
bypass
Output VO
monitoring
node
5
VCM
+
Pulse generator
Z O = 50 Ω
Fig. 5 - Dual Channel Test Circuit for Common Mode Transient Immunity
Rev. 2.0, 25-Oct-12
Document Number: 84607
5
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
www.vishay.com
Vishay Semiconductors
SAFETY AND INSULATION RATINGS
PARAMETER
TEST CONDITION
Climatic classification
SYMBOL
MIN.
TYP.
according to IEC 68 part 1
Comparative tracking index
MAX.
UNIT
55/100/21
CTI
175
399
VIOTM
6000
V
VIORM
560
V
PSO
350
mW
ISI
150
mA
TSI
165
°C
Creepage
4
mm
Clearance
4
mm
0.2
mm
Insulation thickness
Note
• As per IEC 60747-5-5, 7.4.3.8.1, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of prodective circuits.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
7
1.6
IF = 20 mA
1.5
1.4
1.3
IF = 10 mA
1.2
IF = 1 mA
1.1
1.0
- 40 - 20
0
20
40
60
80
Fig. 6 - Forward Voltage vs. Ambient Temperature
1.60
VF - Forward Voltage (V)
1.55
1.50
1.45
1.40
1.35
1.30
1.25
1.20
1.15
1.10
0
17611
5
10 15 20 25 30 35 40 45 50
IF - Forward Current (mA)
Fig. 7 - Forward Voltage vs. Forward Current
Rev. 2.0, 25-Oct-12
5
4
VR = 5 V
3
2
1
0
- 40 - 20
100
Tamb - Ambient Temperature (°C)
17610
6
IR - Reverse Current (nA)
IF = 50 mA
17613-1
0
20
40
60
80
100
Tamb - Ambient Temperature (°C)
Fig. 8 - Reverse Current vs. Ambient Temperature
ICCI - Low Level Supply Current (mA)
VF - Forward Voltage (V)
1.7
4.0
3.5
3.0
2.5
VCC = 7 V
IF = 10 mA
VCC = 5 V
IF = 10 mA
2.0
1.5
1.0
0.5
0.0
- 40 - 20
17614
0
20
40
60
80
100
Tamb - Ambient Temperature (°C)
Fig. 9 - Low Level Supply Current vs. Ambient Temperature
Document Number: 84607
6
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
VOL - Low Level Output Voltage (V)
Vishay Semiconductors
3.5
VCC = 7 V
IF = 0.25 mA
3.4
3.3
VCC = 5 V
IF = 0.25 mA
3.2
3.1
3.0
2.9
2.8
- 40 - 20
0
20
40
60
80
100
Tamb - Ambient Temperature (°C)
17615
2.8
2.7
2.6
RL = 350 Ω
2.5
2.4
RL = 4 kΩ
2.3
RL = 1 kΩ
2.2
2.1
- 40 - 20
0
20
40
60
80
ITH - Input Threshold Off Current (µA)
Fig. 11 - Input Threshold On Current vs. Ambient Temperature
2.6
2.5
2.4
RL = 350 Ω
2.3
2.2
RL = 4 kΩ
2.1
RL = 1 kΩ
2.0
- 40 - 20
17617
0
20
40
60
Fig. 12 - Input Threshold Off Current vs. Ambient Temperature
Rev. 2.0, 25-Oct-12
IL = 16 mA
IL = 13 mA
0.15
IL = 10 mA
0.10
IL = 6 mA
0.05
0.00
- 40 - 20
0
20
40
60
80
100
Tamb - Ambient Temperature (°C)
Fig. 13 - Low Level Output Voltage vs. Ambient Temperature
60
IF = 5 mA
IF = 10 mA
50
40
30
20
10
0
- 40 - 20
17619
0
20
40
60
80
100
Tamb - Ambient Temperature (°C)
Fig. 14 - Low Level Output Current vs. Ambient Temperature
50
45
40
35
30
25
20
15
10
80 100
Tamb - Ambient Temperature (°C)
VCC = 5.5 V
IF = 5 mA
0.20
100
Tamb - Ambient Temperature (°C)
17616
0.25
IOL - Low Level Output Current (mA)
ITH - Input Threshold On Current (µA)
Fig. 10 - High Level Supply Current vs. Ambient Temperature
0.30
17618
IOH - High Level Output Current (nA)
ICCH - High Level Supply Current (mA)
www.vishay.com
17620
5
0
- 40 - 20
0
20
40
60
80
100
Tamb - Ambient Temperature (°C)
Fig. 15 - High Level Output Current vs. Ambient Temperature
Document Number: 84607
7
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
www.vishay.com
Vishay Semiconductors
PWD - Pulse Width Distortion (ns)
5.5
Vo - Output Voltage (V)
5.0
4.5
4.0
3.5
3.0
2.5
2.0
RL = 350 Ω
1.5
RL = 1 kΩ
1.0
RL = 4 kΩ
0.5
0.0
0
1
2
3
tPLH, 4 kΩ
100
tPLH, 1 kΩ
tPLH, 350 Ω
40
tPHL, 350 Ω
tPHL, 1 kΩ
20
tPHL, 4 kΩ
0
- 40 - 20
0
20
40
60
80
RL = 350 Ω
0
- 40 - 20
0
20
40
60
80
100
Tamb - Ambient Temperature (°C)
60
50
RL = 4 kΩ
40
30
RL = 1 kΩ
20
10
RL = 350 Ω
0
5
9
7
11
13
15
IF - Forward Current (mA)
17625
Fig. 17 - Propagation Delay vs. Ambient Temperature
Fig. 20 - Pulse Width Distortion vs. Forward Current
120
300
tPLH, 4 kΩ
tr, f - Rise and Fall Time (ns)
tP - Propagation Delay Time (ns)
RL = 1 kΩ
10
100
Tamb - Ambient Temperature (°C)
17622
20
Fig. 19 - Pulse Width Distortion vs. Ambient Temperature
PWD - Pulse Width Distortion (ns)
tP - Propagation Delay Time (ns)
120
60
30
17624
Fig. 16 - Output Voltage vs. Forward Input Current
80
RL = 4 kΩ
40
5
4
IF - Forward Input Current (mA)
17621
50
100
80
tPLH, 1 kΩ
tPLH, 350 Ω
60
40
tPHL, 350 Ω
tPHL, 1 kΩ
20
tPHL, 4 kΩ
tr, RL = 4 kΩ
250
200
150
17623
7
9
11
13
tr, RL = 1 kΩ
50
Fig. 18 - Propagation Delay vs. Forward Current
Rev. 2.0, 25-Oct-12
tr, RL = 350 Ω
0
- 40 - 20
15
IF - Forward Current (mA)
tf, RL = 1 kΩ
tf, RL = 4 kΩ
100
0
5
tf, RL = 350 Ω
17626
0
20
40
60
80
100
Tamb - Ambient Temperature (°C)
Fig. 21 - Rise and Fall Time vs. Ambient Temperature
Document Number: 84607
8
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
www.vishay.com
Vishay Semiconductors
tE - Enable Propagation Delay (ns)
tr, f - Rise and Fall Time (ns)
300
tr, RL = 4 kΩ
250
200
150
tf, RL = 350 Ω
tf, RL = 1 kΩ
tf, RL = 4 kΩ
100
tr, RL = 1 kΩ
50
tr, RL = 350 Ω
0
7
5
9
11
13
50
tELH = 4 kΩ
40
20
tELH = 1 kΩ
10
17628
Fig. 22 - Rise and Fall Time vs. Forward Current
tELH = 350 Ω
tEHL = 350 Ω
30
15
IF - Forward Current (mA)
17627
60
tEHL = 1 kΩ
0
- 40 - 20
0
tEHL = 4 kΩ
20
40
60
80
100
Tamb - Ambient Temperature (°C)
Fig. 23 - Enable Propagation Delay vs. Ambient Temperature
PACKAGE DIMENSIONS in millimeters
3.05 ± 0.05
R 0.13
CL
6.10
0.36
3.91 ± 0.05
1.27
0.91
4.32
6.6
1.14
0.41
Pin one ID
7°
40°
0.38 ± 0.05
4.88 ± 0.05
1.49 ± 0.05
ISO methode A
0.10
0.20
3.18 ± 0.05
0.20
5° max.
R 0.25 max.
1.27 typ.
1.02
0.51 ± 0.10
2 plcs.
Lead coplanarity
± 0.001 max.
i178020-3
PACKAGE MARKING (example)
0601X1
V YWW Y68
Notes
• The VDE Logo is only marked on option1 parts.
• Tape and reel suffix (T) is not part of the package marking.
ESD CAUTION
This is an ESD (electro static discharge) sensitive device. Electrostatic charges accumulate on the human body and test
equipment and can discharge without detection. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality. ESD withstand voltage of this device is up to 1500 V acc. to JESD22-A114-B.
Rev. 2.0, 25-Oct-12
Document Number: 84607
9
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
工商网监
湘ICP备2023018690号
