VO615A-4X001

VO615A www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, High Temperature C FEATURES E • Temperature range -55 °C to +110 °C • Rated impulse voltage (transient overvoltage), VIOTM = 6 kVpeak • Isolation test voltage (partial discharge test voltage), Vpd = 1.6 kV • Rated isolation voltage (RMS includes DC), VIOWM = 600 VRMS • Rated recurring peak voltage (repetitive) VIORM = 850 Vpeak • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 1 A C 17918-23 DESCRIPTION APPLICATIONS The VO615A consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4 pin plastic dual inline package. Circuits for safe protective separation against electrical shock according to safety class II (reinforced isolation): • Application class I to IV at mains voltage ≤ 300 V • Application class I to IV at mains voltage ≤ 600 V according to table 1 of IEC 60664-1, suitable for: - Switch-mode power supplies - Line receiver - Computer peripheral interface - Microprocessor system interface AGENCY APPROVALS The safety application model number covering all products in this datasheet is VO615A. This model number should be used when consulting safety agency documents. • BSI • DIN EN 60747-5-5 (VDE 0884-5), available with option 1 • FIMKO • UL 1577 • cUL 1577 • CQC ORDERING INFORMATION V O 6 1 5 A - # X 0 # # DIP-# T 7.62 mm PART NUMBER CTR BIN PACKAGE OPTION TAPE AND REEL Option 6 10.16 mm Option 7 > 0.6 mm Option 8 Option 9 9.27 mm > 8 mm CTR (%) AGENCY CERTIFIED/ PACKAGE 5 mA UL, cUL, BSI, FIMKO, 50 to 600 CQC DIP-4 VO615A DIP-4, 400 mil, VO615Aoption 6 X006 VO615ASMD-4, option 7 X007T 10 mA 40 to 80 5 mA 63 to 125 100 to 200 160 to 320 50 to 150 100 to 300 80 to 160 130 to 260 200 to 400 VO615A-1 VO615A-2 VO615A-3 VO615A- VO615A- VO615A1X006 2X006 3X006 VO615A- VO615A- VO615A1X007T 2X007T 3X007T VO615A3X008T VO615A- VO615A- VO615A- VO615AX009T 1X009T 2X009T 3X009T VO615A-4 VO615A-5 VO615A-6 VO615A-7 VO615A-8 VO615A-9 VO615A- VO615A- VO615A- VO615A- VO615A- VO615A4X006 5X006 6X006 7X006 8X006 9X006 VO615A- VO615A- VO615A- VO615A- VO615A- VO615A4X007T 5X007T 6X007T 7X007T 8X007T 9X007T UL, cUL, BSI, FIMKO, 50 to 600 40 to 80 63 to 125 100 to 200 CQC, VDE (option 1) VO615A- VO615A- VO615A- VO615ADIP-4 X001 1X001 2X001 3X001 VO615A- VO615ADIP-4, 400 mil, 2X016 3X016 option 6 VO615AVO615AVO615ASMD-4, option 7 3X017T X017T 1X017T VO615ASMD-4, option 8 3X018T VO615AVO615AVO615ASMD-4, option 9 1X019T 2X019T 3X019T 160 to 320 50 to 150 100 to 300 80 to 160 130 to 260 200 to 400 SMD-4, option 8 SMD-4, option 9 - - - - - - VO615A4X009T VO615A5X009T VO615A6X009T VO615A7X009T - VO615A9X009T VO615A4X001 VO615A4X016 VO615A4X017T VO615A4X018T VO615A4X019T VO615A5X016 - - - VO615A6X017T VO615A7X017T - - - VO615A8X001 VO615A8X016 VO615A8X017T VO615A8X018T - - - - - VO615A6X001 VO615A7X001 VO615A9X016 VO615A9X017T - - Note • Additional options may be possible, please contact sales office Document Number: 81753 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 08-Feb-17 VO615A www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION INPUT Reverse voltage Forward current Forward surge current LED power dissipation OUTPUT Collector emitter voltage Emitter collector voltage Collector current Collector peak current Output power dissipation COUPLER Operating ambient temperature range Storage temperature range Soldering temperature (1) SYMBOL VALUE UNIT VR IF V mA A mW tp ≤ 10 μs at 25 °C IFSM Pdiss 6 60 1.5 100 tp/T = 0.5, tp ≤ 10 ms at 25 °C VCEO VECO IC ICM Pdiss 70 7 50 100 150 V V mA mA mW 2 mm from case, ≤ 10 s Tamb Tstg Tsld -55 to +110 -55 to +125 260 °C °C °C Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD), and wave profile for soldering conditions for through hole devices (DIP), please go to “Assembly Instructions” (www.vishay.com/doc?80054) Ptot - Power Dissipation (mW) 200 150 Phototransistor 100 50 Diode 0 0 25 50 75 100 125 150 Tamb - Ambient Temperature (°C) Fig. 1 - Permissible Power Dissipation vs. Ambient Temperature ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER INPUT Forward voltage Reverse current Junction capacitance OUTPUT Collector emitter voltage Emitter collector voltage Collector emitter leakage current COUPLER Collector emitter saturation voltage Cut-off frequency Coupling capacitance TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IF = 50 mA VR = 6 V VR = 0, f = 1 MHz VF IR Cj - 1.43 50 1.6 100 - V μA pF IC = 1 mA IE = 100 μA VCE = 20 V, IF = 0 VCEO VECO ICEO 70 7 - 10 100 V V nA IF = 10 mA, IC = 1 mA VCE = 5 V, IF = 10 mA, RL = 100 Ω f = 1 MHz VCEsat fc Ck - 110 0.6 0.3 - V kHz pF Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements Document Number: 81753 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 08-Feb-17 VO615A www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION VCE = 5 V, IF = 1 mA IC/IF VCE = 5 V, IF = 5 mA VCE = 5 V, IF = 10 mA PART SYMBOL MIN. TYP. MAX. UNIT VO615A-1 VO615A-2 VO615A-3 VO615A-4 VO615A VO615A-5 VO615A-6 VO615A-7 VO615A-8 VO615A-9 VO615A-1 VO615A-2 VO615A-3 VO615A-4 CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR 13 22 34 56 50 50 100 80 130 200 40 63 100 160 30 45 70 90 - 600 150 300 160 260 400 80 125 200 320 % % % % % % % % % % % % % % SAFETY AND INSULATION RATED PARAMETERS PARAMETER TEST CONDITION Climatic classification According to IEC 68 part 1 Pollution degree According to DIN VDE 0109 Comparative tracking index SYMBOL VALUE UNIT 55 / 110 / 21 2 Insulation group IIIa CTI 250 Maximum rated withstanding isolation voltage According to UL1577, t = 1 min VISO 5000 VAC Maximum transient isolation voltage According to DIN EN 60747-5-5 VIOTM 6000 Vpeak Maximum repetitive peak isolation voltage According to DIN EN 60747-5-5 VIORM 850 Vpeak Isolation resistance Tamb = 25 °C, VIO = 500 V RIO ≥ Tamb = 100 °C, VIO = 500 V RIO ≥ 1011 1012 Ω Ω RIO ≥ 109 Ω Output safety power PSO 265 mW Input safety current ISI 130 mA Tamb = TS, VIO = 500 V Input safety temperature Creepage distance Clearance distance Creepage distance Clearance distance TS DIP-4; SMD-4, option 7; SMD-4, option 9 DIP-4, 400 mil, option 6; SMD-4, option 8 150 °C ≥ 7.6 mm ≥ 7.6 mm ≥ 8.0 mm ≥ 8.0 mm DTI ≥ 0.4 mm Input to output test voltage, method B VIORM x 1.875 = VPR, 100 % production test with tM = 1 s, partial discharge < 5 pC VPR 1600 Vpeak Input to output test voltage, method A VIORM x 1.6 = VPR, 100 % sample test with tM = 10 s, partial discharge < 5 pC VPR 1360 Vpeak Insulation thickness Note • According to DIN EN 60747-5-5 (VDE 0884), § 7.4.3.8.2 (see Fig. 2). This optocoupler is suitable for safe electrical isolation only within the safety ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits Document Number: 81753 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 08-Feb-17 VO615A www.vishay.com Vishay Semiconductors VIOTM 300 t1, t2 t3 , t4 ttest tstres Phototransistor PSO (mW) 250 200 = 1 s to 10 s =1s = 10 s = 12 s Vpd 150 VIOWM VIORM 100 IR-diode ISI (mA) 50 0 0 0 25 50 75 100 125 150 13930 TSI - Safety Temperature (°C) Fig. 2 - Derating Diagram t3 ttest t4 tTr = 60 s t1 t2 t stres t Fig. 3 - Test Pulse Diagram for Sample Test According to DIN EN 60747-5-2 (VDE 0884); IEC 60747-5-5 SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Delay time VS = 5 V, IC = 2 mA, RL = 100 Ω td - 3 - μs Rise time VS = 5 V, IC = 2 mA, RL = 100 Ω tr - 3 - μs Fall time VS = 5 V, IC = 2 mA, RL = 100 Ω tf - 4.7 - μs Storage time VS = 5 V, IC = 2 mA, RL = 100 Ω ts - 0.3 - μs Turn-on time VS = 5 V, IC = 2 mA, RL = 100 Ω ton - 6 - μs Turn-off time VS = 5 V, IC = 2 mA, RL = 100 Ω toff - 5 - μs Turn-on time VS = 5 V, IF = 10 mA, RL = 1 kΩ ton - 3 - μs Turn-off time VS = 5 V, IF = 10 mA, RL = 1 kΩ toff - 10 - μs VCC = 5 V Input Input pulse RL VOUT 10 % Output pulse 90 % tr t on Fig. 4 - Test Circuit tf t off Fig. 5 - Test Circuit and Waveforms Document Number: 81753 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 08-Feb-17 VO615A www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 30 IC - Collector Current (mA) IF - Forward Current (mA) 100 Tamb = 50 °C Tamb = 75 °C 10 Tamb = 110 °C Tamb = 25 °C 1 Tamb = - 55 °C Tamb = 0 °C 15 Fig. 6 - Forward Current vs. Forward Voltage IF = 10 mA 10 IF = 5 mA 5 IF = 2 mA IF = 1 mA 0 22329 VF - Forward Voltage (V) 0.1 0.2 0.3 0.4 VCE - Collector Emitter Voltage (sat) (V) Fig. 9 - Collector Current vs. Collector Emitter Voltage (saturated) 25 1.2 20 NCTR - Normalized CTR (sat) IC - Collector Current (mA) IF = 25 mA 20 0 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 IF = 30 mA 15 IF = 20 mA 10 IF = 15 mA IF = 10 mA 5 IF = 5 mA 0 1.0 IF = 5 mA 0.8 IF = 10 mA 0.6 0.4 VCE = 0.4 V Normalized to: IF = 10 mA, VCE = 5 V, Tamb = 25 °C 0.2 0 0 2 4 6 8 10 -60 -40 -20 VCE - Collector Emitter Voltage (NS) (V) Fig. 7 - Collector Current vs. Collector Emitter Voltage (non-saturated) 1000 VCE = 40 V 10 VCE = 12 V VCE = 24 V 0.1 22328 20 40 60 80 100 120 Fig. 10 - Normalized CTR (saturated) vs. Ambient Temperature 1.2 IF = 0 mA 0.001 -60 -40 -20 0 Tamb - Ambient Temperature (°C) 0 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 8 - Leakage Current vs. Ambient Temperature NCTR - Normalized CTR (NS) 22327 ICE0 - Leakage Current (nA) 25 IF = 10 mA 1.0 0.8 IF = 5 mA 0.6 0.4 0.2 Normalized to: IF = 10 mA, VCE = 5 V, Tamb = 25 °C 0 -60 -40 -20 0 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 11 - Normalized CTR (non-saturated) vs. Ambient Temperature Document Number: 81753 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 08-Feb-17 VO615A www.vishay.com Vishay Semiconductors 20 Tamb = 25 °C 1.0 0.8 -20 Tamb = - 55 °C 0.6 Tamb = 75 °C 0.4 Tamb = 110 °C 0 -40 -60 -80 -100 -120 Normalized to: IF = 10 mA, VCE = 5 V, Tamb = 25 °C 0.2 -140 -160 0.1 1 10 1 100 Fig. 12 - Normalized CTR (non-saturated) vs. Forward Current 1.0 Tamb = 25 °C Tamb = 0 °C 0.8 Normalized to: IF = 10 mA, VCE = 5 V, Tamb = 25 °C Tamb = - 55 °C 0.6 0.4 0.2 Tamb = 75 °C Tamb = 110 °C 0 0.1 1 100 1000 f (kHz) Fig. 15 - Phase Angle vs. Frequency 1000 ton, toff - Switching Time (μs) NCTR - Normalized CTR (sat) VCE = 0.4 V 10 22335 IF - Forward Current (mA) 1.2 VCE = 5 V 0 Tamb = 0 °C Phase (deg) NCTR - Normalized CTR (NS) 1.2 VCE = 5 V, IF = 10 mA 100 toff (μs) 10 ton (μs) 1 0.1 10 0 100 22336 IF - Forward Current (mA) Fig. 13 - Normalized CTR (saturated) vs. Forward Current 5 10 15 20 RL - Load Resistance (kΩ) Fig. 16 - Switching Time vs. Load Resistance 1000 FCTR (kHz) VCC = 5 V 100 10 1 0.1 22334 1 10 100 IC (mA) Fig. 14 - FCTR vs. IC (saturated) (mA) Document Number: 81753 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 08-Feb-17 VO615A www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS (in millimeters) 6.5 ± 0.3 Pin 1 identifier 7.62 to 9.5 4.58 ± 0.3 7.62 typ. 0.4 ± 0.1 3.5 ± 0.3 4.5 ± 0.3 2.8 ± 0.5 0° to 15° 1.3 ± 0.1 0.25 typ. 0.5 ± 0.1 2.54 typ. i178027-11 Option 6 Option 7 Option 8 Option 9 7.62 typ. 7.62 typ. 7.62 typ. 10.3 max. 7.62 typ. 3.5 ± 0.3 0.6 min. 0.25 ± 0.1 4.3 ± 0.3 3.5 ± 0.3 0.1 ± 0.1 3.6 ± 0.3 0.1 min. 8 min. 2.7 min. 9.27 min. 0.6 min. 10.3 max. 0.6 min. 12.1 max. 8 min. 2.54 0.76 R 0.25 0.76 2.54 0.76 2.54 10.16 typ. R 0.25 R 0.25 1.52 9.95 min. 13.0 1.52 7.7 11.05 1.78 8 min. 11.05 1.78 1.52 1.78 20802-36 PACKAGE MARKING (example of VO615A-3X017T) VO615A-3 V YWW 24 Notes • Only options 1, 7, and 8 are reflected in the package marking • The VDE logo is only marked on option1 parts • Tape and reel suffix (T) is not part of the package marking Document Number: 81753 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 08-Feb-17 VO615A www.vishay.com Vishay Semiconductors PACKING INFORMATION (in millimeters) TUBE PACKING TYPE UNITS/TUBE TUBES/BOX UNITS/BOX 100 40 4000 DIP-4, standard and option 6 TAPE AND REEL PACKING TYPE UNITS/TUBE SMD-4, option 7 and option 9 1000 SMD-4, option 8 2000 Top cover tape Embossed carrier Embossment 17998 Fig. 17 - Tape and Reel Shipping Medium 10 pitch cumulative tolerance on tape ± 0.2 2 ± 0.1 1.55 + 0.1 4 ± 0.1 0.35 ± 0.1 1.75 ± 0.1 7.5 ± 0.1 16 ± 0.3 4.65 ± 0.1 5° max. X 5° max. 12 ± 0.1 4.55 ± 0.1 X 1.5 ± 0.1 10.3 ± 0.1 Section X-X Fig. 18 - Tape and Reel Packing for Option 7 and Option 9 (1000 units per reel) Document Number: 81753 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 08-Feb-17 VO615A www.vishay.com Vishay Semiconductors 1.5 ± 0.1 4 ± 0.1 2 ± 0.1 1.75 ± 0.1 0.35 ± 0.1 11.5 ± 0.1 24 ± 0.3 12.5 ± 0.1 X 5° max. X 5° max. 8 ± 0.1 3.9 ± 0.1 1.5 ± 0.1 4.65 ± 0.1 Section X-X R0.76 Fig. 19 - Tape and Reel Packing for Option 8 (2000 units per reel) Document Number: 81753 9 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 08-Feb-17 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000