VO615C-3X016

VO615C www.vishay.com Vishay Semiconductors Low Input Current Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS FEATURES A 1 4 C C 2 3 E • • • • • • • • • • 22647 DESCRIPTION The 110 °C rated VO615C series feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 package. The coupling devices are designed for signal transmission between two electrically separated circuits. Copper lead-frame Operating temperature from -55 °C to +110 °C Isolation test voltage, 5300 VRMS High collector emitter voltage, VCEO = 80 V Low saturation voltage Fast switching times Low CTR degradation Low coupling capacitance End stackable, 0.100" (2.54 mm) spacing Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • • • • • AC adapters SMPS PLC Factory automation Game consoles AGENCY APPROVALS The safety application model number covering all products in this datasheet is VO615C. This model number should be used when consulting safety agency documents. • UL1577, file no. E52744 • cUL tested to CSA 22.2 bulletin 5A • DIN EN 60747-5-5 (VDE 0884), available with option 1 • FIMKO EN60065 and EN60950-1, file no. FI 27409 • CQC GB8898-2001 ORDERING INFORMATION V O 6 1 5 C - # PART NUMBER X CTR BIN 0 # # DIP-4 Option 6 7.62 mm 10.16 mm T PACKAGE OPTION TAPE AND REEL Option 9 > 8 mm CTR (%) AGENCY CERTIFIED/PACKAGE UL, cUL, FIMKO, CQC DIP-4 VDE, UL, cUL, FIMKO, CQC (option 1) DIP-4, 400 mil, option 6 SMD-4, option 9 10 mA 40 to 80 63 to 125 100 to 200 VO615C-1 - - 160 to 320 - 40 to 80 63 to 125 100 to 200 160 to 320 - VO615C-2X016 VO615C-3X016 VO615C-4X016 - VO615C-2X019T, VO615C-2X019T1 (1) - - Notes • Additional options may be available, please contact the sales office. (1) T1 rotation in tape and reel packaging. Rev. 1.3, 17-Sep-14 Document Number: 83500 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO615C www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Forward current IF 60 mA tp  10 μs IFSM 1.5 A at 25 °C Pdiss 70 mW Collector emitter voltage VCEO 80 V Emitter collector voltage VECO 7 V 50 mA Forward surge current Power dissipation OUTPUT Collector current tp  1 ms IC 100 mA Output power dissipation at 25 °C Pdiss 150 mW t = 1 min COUPLER Isolation test voltage (RMS) VISO 5300 VRMS Total power dissipation Ptot 200 mW Operation temperature Tamb -55 to +110 °C Storage temperature range Tstg -55 to +150 °C Tj 125 °C Tsld 260 °C Junction temperature Soldering temperature 2 mm from case,  10 s (1) 450 400 350 Phototransistor Psi (mW) 300 250 200 IR-diode Isi (mA) 150 100 50 0 0 25 50 75 100 125 150 175 Tsi - Safety Temperature (°C) Fig. 1 - Total Power Dissipation vs. Safety Temperature Rev. 1.3, 17-Sep-14 Ptot - Total Power Dissipation (mW) Ptot - Total Power Dissipation (mW) Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD), and wave profile for soldering conditions for through hole devices (DIP), please go to “Assembly Instructions” (www.vishay.com/doc?80054). 250 Coupled device 200 150 100 Phototransistor 50 IR-diode 0 0 25 50 75 100 125 Tamb - Ambient Temperature (°C) Fig. 2 - Total Power Dissipation vs. Ambient Temperature Document Number: 83500 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO615C www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL Forward voltage IF = 60 mA Reverse current VR = 6 V MIN. TYP. MAX. UNIT VF 1.35 1.6 V IR 0.01 10 μA VR = 0 V, f = 1 MHz Cj 9 INPUT Junction capacitance pF OUTPUT Collector emitter leakage current VCE = 10 V ICEO 0.3 VCE = 5 V, f = 1 MHz CCE 2.8 Collector emitter breakdown voltage IC = 1 mA BVCEO 80 V Emitter collector breakdown voltage IE = 100 μA BVECO 7 V IF = 10 mA, IC = 2.5 mA VCEsat 0.25 f = 1 MHz CC 0.4 pF IF = 10 mA, VCC = 5 V, RL = 100  fctr 110 kHz Collector emitter capacitance 100 nA pF COUPLER Collector emitter saturation voltage Coupling capacitance Cut-off frequency 0.4 V Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER IC/IF TEST CONDITION IF = 10 mA, VCE = 5 V PART SYMBOL MIN. MAX. UNIT VO615C-1 CTR 40 TYP. 80 % VO615C-2 CTR 63 125 % VO615C-3 CTR 100 200 % VO615C-4 CTR 160 320 % MAX. UNIT SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. NON-SATURATED Rise time tr 3 μs Fall time tf 3 μs ton 6 μs toff 4 μs IC = 2 mA, VCC = 5 V, RL = 100  Turn-on time Turn-off time VCC = 5 V Input Input pulse RL VOUT 10 % Output pulse 90 % tr t on Fig. 3 - Test Circuit Rev. 1.3, 17-Sep-14 tf t off Fig. 4 - Test Circuit and Waveforms Document Number: 83500 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO615C www.vishay.com Vishay Semiconductors SAFETY AND INSULATION RATINGS PARAMETER SYMBOL VALUE UNIT Output safety power PSO 700 mW Input safety current Isi 400 mW Safety temperature TS 175 °C Comparative tracking index CTI 175 MAXIMUM SAFETY RATINGS INSULATION RATED PARAMETERS Maximum withstanding isolation voltage VISO 5300 VRMS VIOTM 8000 Vpeak VIORM 565 Vpeak VIORM (1) 1140 Vpeak Maximum transient isolation voltage Maximum repetitive peak isolation voltage Insulation resistance Tamb = 25 °C, VDC = 500 V RIO  1012  Isolation resistance Tamb = 100 °C, VDC = 500 V RIO  1011  Climatic classification (according to IEC 68 part 1) 55/110/21 Environment (pollution degree in accordance to DIN VDE 0109) Internal and external creepage Clearance 2 Standard DIP-4 7 mm 400 mil DIP-4 8 mm Standard DIP-4 7 mm 400 mil DIP-4 8 mm 0.4 mm Insulation thickness Notes • As per DIN EN 60747-5-5, 2, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. (1) Only for option 6. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 100 60 IC - Collector Current (mA) IF - Forward Current (mA) Tamb = 25 °C Tamb = 50 °C 10 Tamb = 75 °C Tamb = 0 °C Tamb = 110 °C 1 Tamb = -40 °C IF = 35 mA 50 IF = 30 mA IF = 25 mA 40 IF = 20 mA 30 IF = 15 mA 20 IF = 10 mA 10 IF = 5 mA Tamb = -55 °C 0.1 IF = 1 mA 0 0.6 0.8 1.0 1.2 1.4 1.6 VF - Forward Voltage (V) Fig. 5 - Forward Voltage vs. Forward Current Rev. 1.3, 17-Sep-14 0 1 2 3 4 5 6 7 8 9 10 VCE - Collector Emitter Voltage (V) Fig. 6 - Collector Current vs. Collector Emitter Voltage (NS) Document Number: 83500 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO615C www.vishay.com Vishay Semiconductors 1.2 ICE0 - Leakage Current (nA) IF = 0 mA 1000 VCE = 40 V 100 10 1 VCE = 24 V 0.1 VCE = 12 V 0.01 NCTR - Normalized CTR (sat) 10 000 0.001 1.0 0.8 0.6 0.4 0.2 0.0 -60 -40 -20 0 20 40 60 80 IF = 10 mA Normalized to CTR value: IF = 10 mA, VCE = 5 V, Tamb = 25 °C -60 -40 -20 100 Tamb - Ambient Temperature (°C) IC - Collector Current (mA) 25 IF = 25 mA 20 15 IF = 10 mA 10 IF = 5 mA 5 IF = 2 mA 0 0 0.1 0.2 0.3 1.2 0.8 0.6 Tamb = 75 °C 0.4 Tamb = 110 °C 0.2 I 0.0 Normalized to CTR value: F = 10 mA, VCE = 5 V, Tamb = 25 °C 1 10 100 IF - Forward Current (mA) Fig. 11 - Normalized CTR (non-saturated) vs. Forward Current 1.0 IF = 10 mA 1.0 0.8 0.6 0.4 Normalized to CTR value: IF = 10 mA, VCE = 5 V, Tamb = 25 °C -60 -40 -20 0 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 9 - Normalized Current Transfer Ratio (non-saturated) vs. Ambient Temperature Rev. 1.3, 17-Sep-14 NCTR - Normalized CTR (sat) NCTR - Normalized CTR (non-sat) 80 100 120 Tamb = -55 °C 0.1 1.2 0.0 60 Tamb = 0 °C VCEsat - Collector Emitter Saturation Voltage (V) 0.2 40 Tamb = 25 °C 1.0 0.4 Fig. 8 - Collector Current vs. Collector Emitter Voltage (saturated) 20 Fig. 10 - Normalized Current Transfer Ratio (saturated) vs. Ambient Temperature NCTR - Normalized CTR (non-sat) Fig. 7 - Leakage Current vs. Ambient Temperature 0 Tamb - Ambient Temperature (°C) Tamb = 0 °C 0.8 0.6 Tamb = -55 °C Tamb = 25 °C 0.4 Tamb = 75 °C 0.2 Tamb = 110 °C Normalized to CTR value: IF = 10 mA, VCE = 5 V, Tamb = 25 °C 0.0 0.1 1 10 100 IF - Forward Current (mA) Fig. 12 - Normalized CTR (saturated) vs. Forward Current Document Number: 83500 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO615C www.vishay.com Vishay Semiconductors 1000 VCE = 5 V Phase Angle (deg) -20 RL = 100 Ω -40 -60 RL = 1 kΩ -80 -100 -120 -140 ton, toff - Switching Time (μs) 0 VCE = 5 V, IF = 10 mA 100 toff 10 1 0.1 -160 1 10 100 0 1000 f - Frequency (kHz) 100 10 1 10 IC - Collector Current (mA) Fig. 14 - Frequency vs. Collector Current Rev. 1.3, 17-Sep-14 100 VCEsat - Collector Emitter Voltage (V) VCC = 5 V 1 10 15 20 Fig. 15 - Switching Time vs. Load Resistance 1000 0.1 5 RL - Load Resistance (kΩ) Fig. 13 - Phase Angle vs. Frequency F-3dB - Cut-Off Frequency (kHz) ton 0.20 IF = 10 mA 0.18 0.16 0.14 0.12 0.10 0.08 0.06 -60 -40 -20 0 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 16 - Collector Emitter Voltage vs. Ambient Temperature (saturated) Document Number: 83500 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO615C www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 6.5 ± 0.5 Anode 7.62 ± 0.3 4.6 ± 0.5 3.5 ± 0.5 0.5 typ. 0.26 3.3 ± 0.5 2.8 ± 0.5 0.5 ± 0.1 2.54 ± 0.25 7.62 to 9.98 Option 6 Option 9 7.62 typ. 7.62 typ. 3.5 ± 0.3 3.5 ± 0.3 0.1 ± 0.1 0.1 min. 0.6 min. 2.7 min. 8.16 ± 0.8 0.76 10.16 ± 0.3 10.16 typ. 1.78 2.54 R 0.25 1.52 8 min. 11.05 PACKAGE MARKING (Example of VO615C-3X016) VO615C-3 V YWW 25 Note • Option information is not marked. Rev. 1.3, 17-Sep-14 Document Number: 83500 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO615C www.vishay.com Vishay Semiconductors PACKING INFORMATION DEVICE PER TUBE TYPE UNITS/TUBE TUBES/BOX UNITS/BOX DIP-4 100 40 4000 Regular, special, or bar code label Tape slot in core 13" 17999-1 Fig. 17 - Tape and Reel Shipping Medium Ø 1.55 ± 0.05 12 ± 0.1 2 ± 0.1 4 ± 0.1 1.75 ± 0.1 7.5 ± 0.1 16 ± 0.3 0.3 ± 0.05 22713 Fig. 18 - Tape Packing for Option 7 and 9, T1 rotation (2000 units per reel) Rev. 1.3, 17-Sep-14 Document Number: 83500 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000