VO617A
www.vishay.com
Vishay Semiconductors
Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS
FEATURES
A
1
4
C
C
2
3
E
•
•
•
•
•
•
•
•
•
•
•
•
Operating temperature from -55 °C to +110 °C
Good CTR linearity depending on forward current
Isolation test voltage, 5300 VRMS
High collector emitter voltage, VCEO = 80 V
Low saturation voltage
Fast switching times
Low CTR degradation
Temperature stable
Low coupling capacitance
End stackable, 0.100" (2.54 mm) spacing
High common mode interference immunity
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
17918-24
•
•
•
•
•
DESCRIPTION
The 110 °C rated VO617A feature a high current transfer
ratio, low coupling capacitance and high isolation voltage.
These couplers have a GaAs infrared diode emitter, which
is optically coupled to a silicon planar phototransistor
detector, and is incorporated in a plastic DIP-4 package.
The coupling devices are designed for signal transmission
between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm spacing.
Creepage and clearance distances of > 8.0 mm are
achieved with option 6. This version complies with
IEC 60950 (DIN VDE 0805) for reinforced insulation up to an
operation voltage of 400 VRMS or DC. Specifications subject
to change.
AC adapters
SMPS
PLC
Factory automation
Game consoles
AGENCY APPROVALS
Safety application model number covering all products in
this data sheet is VO617A. This model number should be
used when consulting safety agency documents.
• UL1577, file no. E52744
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
• BSI IEC 60950; IEC 60065
• FIMKO EN 60065, EN 60950-1
• CQC GB8898-2011
ORDERING INFORMATION
V
O
6
1
7
A
-
PART NUMBER
#
X
CTR
BIN
50 to 600
VO617A
40 to 80
VO617A-1
63 to 125
VO617A-2
DIP-4, 400 mil, option 6
-
-
-
SMD-4, option 7
-
-
50 to 600
40 to 80
DIP-4, 400 mil, option 6
SMD-4, option 7
SMD-4, 400 mil, option 8
#
#
PACKAGE OPTION
AGENCY
CERTIFIED/PACKAGE
UL, cUL, BSI, FIMKO
DIP-4
VDE, UL, cUL, BSI, FIMKO
0
VO617A2X007T
63 to 125
-
-
-
-
VO617A1X017T
VO617A2X017T
VO617AX018T
-
-
CTR (%)
5 mA
100 to 200 160 to 320
VO617A-3 VO617A-4
VO617AVO617A3X006
4X006
VO617AVO617A3X007T
4X007T
100 to 200 160 to 320
VO617AVO617A3X016
4X016
VO617AVO617A3X017T
4X017T
VO617AVO617A3X018T
4X018T
DIP-4
Option 6
7.62 mm
10.16 mm
Option 7
Option 8
> 8 mm
9.27 mm
T
TAPE
AND
REEL
80 to 160
VO617A-7
130 to 260
VO617A-8
200 to 400
VO617A-9
-
-
-
-
-
-
80 to 160
VO617A7X016
VO617A7X017T
130 to 260
VO617A8X016
VO617A8X017T
200 to 400
VO617A9X016
VO617A9X017T
-
-
-
Note
• Additional options may be possible, please contact sales office
Document Number: 83430
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 2.6, 26-Mar-18
VO617A
www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
CONDITIONS
SYMBOL
VALUE
UNIT
INPUT
Reverse voltage
VR
6
V
Forward current
IF
60
mA
tp ≤ 10 μs
Forward surge current
IFSM
1.5
A
Pdiss
70
mW
Collector emitter voltage
VCEO
80
V
Emitter collector voltage
VECO
7
V
IC
50
mA
ICM
100
mA
Pdiss
150
mW
LED power dissipation
OUTPUT
Collector current
tp/T = 0.5, tp ≤ 10 ms
Collector peak current
Ouput power dissipation
COUPLER
Total power dissipation
Ptot
200
mW
Operation temperature
Tamb
-55 to +110
°C
Storage temperature range
Tstg
-55 to +150
°C
Tsld
260
°C
Soldering temperature
2 mm from case, ≤ 10 s
Ptot - Total Power Dissipation (mW)
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability
250
Coupled device
200
150
Detector
100
50
LED
0
0
20
40
60
80
100
120
Tamb - Ambient Temperature (°C)
Fig. 1 - Total Power Dissipation vs. Ambient Temperature
Document Number: 83430
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 2.6, 26-Mar-18
VO617A
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
IF = 60 mA
-
VF
1
1.35
1.65
V
Reverse current
VR = 6 V
-
IR
-
0.01
10
μA
VR = 0 V, f = 1 MHz
-
Cj
-
13
-
pF
VO617A-1
-
2
50
VO617A-2
-
2
50
VO617A-3
-
5
100
Junction capacitance
OUTPUT
VCE = 10 V
Collector emitter leakage current
VO617A-4
-
5
100
VO617A-7
-
5
100
VO617A-8
-
5
100
100
ICEO
VO617A-9
nA
-
5
VCE = 5 V, f = 1 MHz
-
CCE
-
5.2
-
Collector emitter breakdown voltage
IC = 1 mA
-
BVCEO
80
-
-
V
Emitter collector breakdown voltage
IE = 100 μA
-
BVECO
7
-
-
V
IF = 5 mA, IC = 1.0 mA
-
VCEsat
-
0.25
0.4
V
f = 1 MHz
-
CC
-
0.4
-
pF
Collector emitter capacitance
pF
COUPLER
Collector emitter saturation voltage
Coupling capacitance
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER
IC/IF
TEST CONDITION
IF = 5 mA, VCE = 5 V
PART
SYMBOL
MIN.
TYP.
MAX.
VO617A
CTR
50
-
600
UNIT
%
VO617A-1
CTR
40
-
80
%
VO617A-2
CTR
63
-
125
%
VO617A-3
CTR
100
-
200
%
VO617A-4
CTR
160
-
320
%
VO617A-7
CTR
80
-
160
%
VO617A-8
CTR
130
-
260
%
VO617A-9
CTR
200
-
400
%
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
CTR BIN
SYMBOL
MIN.
TYP.
MAX.
UNIT
IF = 5 mA, VCC = 5 V, RL = 75 Ω
-
tr, tf
-
2
-
μs
-
ton
-
3
-
μs
-
toff
-
2.3
-
μs
IF = 5 mA, VCC = 5 V, RL = 75 Ω
-
fctr
-
190
-
kHz
Turn-on time
IF = 5 mA
-
ton
-
6
-
μs
Turn-off time
IF = 5 mA
-
toff
-
25
-
μs
Rise time
IF = 5 mA
-
tr
-
4.6
-
μs
Fall time
IF = 5 mA
-
tf
-
15
-
μs
NON-SATURATED
Rise and fall time
Turn-on time
Turn-off time
Cut-off frequency
IF = 5 mA, VCC = 5 V, RL = 75 Ω
SATURATED
Document Number: 83430
3
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 2.6, 26-Mar-18
VO617A
www.vishay.com
IF
Vishay Semiconductors
+5V
IF
IF
0
0
tp
IC
R G = 50 Ω
tp
= 0.01
T
100 %
90 %
t p = 50 µs
Channel I
Oscilloscope
R L = 1 MΩ
C L = 20 pF
Channel II
50 Ω
10 %
0
tr
RL
td
ts
t on
95 10804-3
tp
td
tr
t on (= td + tr)
Fig. 2 - Test Circuit, Non-Saturated Operation
IF
t
+5V
I F = 10 mA
0
Pulse duration
Delay time
Rise time
Turn-on time
tf
t off
ts
tf
t off (= ts + tf)
t
Storage time
Fall time
Turn-off time
96 11698
Fig. 4 - Switching Times
IC
R G = 50 Ω
tp
= 0.01
T
t p = 50 µs
Channel I
Channel II
50 Ω
Oscilloscope
R L ≥ 1 MΩ
C L ≤ 20 pF
1 kΩ
95 10843
Fig. 3 - Test Circuit, Saturated Operation
SAFETY AND INSULATION RATINGS
PARAMETER
CONDITION
Climatic classification
According to IEC 68 part 1
Pollution degree
According to DIN VDE 0109
Comparative tracking index
Maximum rated withstanding isolation voltage
SYMBOL
VALUE
UNIT
55 / 115 / 21
2
Insulation group IIIa
CTI
175
According to UL1577, t = 1 min
VISO
4470
VRMS
Tested withstanding isolation voltage
According to UL1577, t = 1 s
VISO
5300
VRMS
Maximum transient isolation voltage
According to DIN EN 60747-5-5
VIOTM
8000
Vpeak
Maximum repetitive peak isolation voltage
According to DIN EN 60747-5-5
VIORM
890
Vpeak
Tamb = 25 °C, VIO = 500 V
RIO
≥ 1012
Ω
Tamb = 100 °C, VIO = 500 V
RIO
≥ 1011
Ω
PSO
700
mW
Input safety current
ISI
400
mA
Input safety temperature
TS
175
°C
≥7
mm
Isolation resistance
Output safety power
Creepage distance
DIP-4
Clearance distance
DIP-4
≥7
mm
Creepage distance
DIP-4, 400 mil, option 6
≥8
mm
Clearance distance
DIP-4, 400 mil, option 6
≥8
mm
Creepage distance
SMD-4, option 7
≥7
mm
Clearance distance
SMD-4, option 7
≥7
mm
Creepage distance
SMD-4, 400 mil, option 8
≥8
mm
Clearance distance
SMD-4, 400 mil, option 8
≥8
mm
≥ 0.4
mm
Insulation thickness
DTI
Note
• As per DIN EN 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance
with the safety ratings shall be ensured by means of protective circuits
Document Number: 83430
4
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 2.6, 26-Mar-18
VO617A
www.vishay.com
Vishay Semiconductors
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
14
Tamb = 110 °C
Tamb = 75 °C
Tamb = 25 °C
Tamb = 0 °C
Tamb = -55 °C
10
IC - Collector Current (mA)
IF - Forward Current (mA)
100
1
0.1
IF = 10 mA
12
10
8
6
4
0.8
1.0
1.2
1.4
1.6
0
VF - Forward Voltage (V)
IF = 2 mA
IF = 35 mA
45
IF = 30 mA
40
35
IF = 25 mA
30
IF = 20 mA
25
20
IF = 15 mA
15
10
IF = 10 mA
IF = 1 mA
5
IF = 5 mA
0
0
1
2
3
4
5
6
7
8
0.2
0.3
0.4
9
10
Fig. 8 - Collector Current vs. Collector Emitter Voltage
NCTR - Normalized CTR (non-saturated)
55
50
0.1
VCE - Collector Emitter Voltage (V)
Fig. 5 - Forward Voltage vs. Forward Current
IC - Collector Current (mA)
IF = 1 mA
2
0
0.6
1.2
IF = 5 mA, VCE = 5 V
1.0
0.8
0.6
0.4
0.2
0
Fig. 6 - Collector Current vs. Collector Emitter Voltage
Normalized to CTR value:
IF = 5 mA, VCE = 5 V, Tamb = 25 °C
-60 -40 -20
VCE - Collector Emitter Voltage (V)
0
20
40
60
80 100 120
Tamb - Ambient Temperature (°C)
Fig. 9 - Normalized Current Transfer Ratio (non-sat.) vs.
Ambient Temperature
1.2
IF = 0 mA
1000
VCE = 40 V
100
10
VCE = 24 V
1
0.1
VCE = 12 V
0.01
0.001
NCTR - Normalized CTR (sat)
10 000
ICE0 - Leakage Current (nA)
IF = 5 mA
IF = 5 mA, VCE = 0.4 V
1.0
0.8
0.6
0.4
0.2
0
-60 -40 -20
0
20
40
60
80 100 120
Tamb - Ambient Temperature (°C)
Fig. 7 - Leakage Current vs. Ambient Temperature
Normalized to CTR value:
IF = 5 mA, VCE = 5 V, Tamb = 25 °C
-60 -40 -20
0
20
40
60
80 100 120
Tamb - Ambient Temperature (°C)
Fig. 10 - Normalized Current Transfer Ratio (sat.) vs.
Ambient Temperature
Document Number: 83430
5
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 2.6, 26-Mar-18
VO617A
Vishay Semiconductors
0.40
0
IF = 10 mA
0.35
0.30
0.25
Ic = 2 mA
0.15
0.10
Ic = 1 mA
0.05
RL = 100 Ω
-40
Ic = 5 mA
0.20
VCE = 5 V
-20
Phase Angle (deg)
VCEsat - Collector Emitter Voltage (V)
www.vishay.com
RL = 1000 Ω
-60
-80
-100
-120
-140
0.00
-160
-60 -40 -20
0
20
40
60
80 100 120
1
Tamb - Ambient Temperature (°C)
1000
Fig. 14 - Phase Angle vs. Frequency
1000
Tamb = 0 °C
1.2
Tamb = -55 °C
Tamb = 25 °C
1.0
0.8
0.6
Tamb = 75 °C
0.4
Tamb = 100 °C
Normalized to:
IF = 5 mA, VCE = 5 V,
Tamb = 25 °C
0.2
0
0.1
1
10
FCTR - Cut-Off Frequency (kHz)
1.4
NCTR - Normalized CTR (NS)
100
f - Frequency (kHz)
Fig. 11 - Collector Emitter Voltage vs. Ambient Temperature
VCC = 5 V
100
10
1
0.1
100
1
10
100
IC - Collector Current (mA)
IF - Forward Current (mA)
Fig. 12 - Normalized CTR (non-sat.) vs. Forward Current
Fig. 15 - Cut-Off Frequency vs. Collector Current
1000
VCE = 0.4 V
Normalized to:
IF = 5 mA,
VCE = 5 V,
Tamb = 25 °C
1.0
0.8
Tamb = 0 °C
Tamb = -55 °C
0.6
0.4
Tamb = 25 °C
0.2
Tamb = 75 °C
Tamb = 100 °C
0
0.1
1
10
ton, toff - Switching Time (μs)
1.2
NCTR - Normalized CTR (sat)
10
VCE = 5 V, IF = 2 mA
100
toff (μs)
10
ton (μs)
1
0.1
100
IF - Forward Current (mA)
Fig. 13 - Normalized CTR (sat.) vs. Forward Current
0
5
10
15
20
RL - Load Resistance (kΩ)
Fig. 16 - Switching Time vs. Load Resistance
Document Number: 83430
6
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 2.6, 26-Mar-18
VO617A
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS (in millimeters)
1.2 ± 0.1
4
3
6.5 ± 0.5
Pin 1 identifier
1
2
0.85 ± 0.1
7.62 ± 0.3
4.58 ± 0.3
0.85 ± 0.1
3.5 ± 0.3
1.2 ± 0.1
0.5 typ.
0.26
3.3 ± 0.5
2.8 ± 0.5
0.5 ± 0.1
2.54 ± 0.25
7.62 to 9.98
Option 6
Option 7
7.62 typ.
7.62 typ.
3.5 ± 0.3
0.35
Option 8
7.62 typ.
+ 0.25
- 0.3
3.5 ± 0.3
3.5 ± 0.3
0.25 ± 0.1
0.1 min.
0.6 min.
8 min.
2.7 min.
9.27 min.
12.1 max.
10.16 ± 0.3
0.76
10.16 typ.
1.78
2.54
R 0.25
1.52
8 min.
11.05
Fig. 17 - Package Drawings
PACKAGE MARKING
VO617A-3
V YWW 25
Fig. 18 - Example of VO617A-3X017T
Notes
• The VDE logo is only marked on option 1 parts. Option information is not marked on the part
• Tape and reel suffix (T) is not part of the package marking
Document Number: 83430
7
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 2.6, 26-Mar-18
VO617A
www.vishay.com
Vishay Semiconductors
PACKING INFORMATION
DEVICE PER TUBE
TYPE
UNITS/TUBE
TUBES/BOX
UNITS/BOX
DIP-4
100
40
4000
Regular, special,
or bar code label
Tape slot in core
13"
17999-1
Fig. 19 - Tape and Reel Shipping Medium
2 ± 0.1
Ø 1.55 ± 0.05
4 ± 0.1
1.75 ± 0.1
7.5 ± 0.1
16 ± 0.3
12 ± 0.1
0.3 ± 0.05
8 ± 0.1
2 ± 0.1
Ø 1.50 ± 0.05
0.4 ± 0.05
11.5 ± 0.1
24 ± 0.3
4 ± 0.1
1.75 ± 0.1
Fig. 20 - Tape and Packing for Option 7 (1000 units per reel)
Fig. 21 - Tape and Reel Packaging for Option 8 (2000 units per reel)
Document Number: 83430
8
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 2.6, 26-Mar-18
VO617A
www.vishay.com
Vishay Semiconductors
SOLDER PROFILES
HANDLING AND STORAGE CONDITIONS
ESD level: HBM class 2
Axis Title
300
10000
5s
Floor life: unlimited
Lead temperature
200
235 °C to
260 °C
Wirst wave
Full line: typical
Dotted lines:
process limits
Second
wave
Moisture sensitivity level 1, according to J-STD-020
1000
ca. 2 K/s
ca. 200 K/s
150
Conditions: Tamb < 30 °C, RH < 85 %
1st line
2nd line
2nd line
Temperature (°C)
250
100 °C to
130 °C
100
100
2 K/s
50
ca. 5 K/s
Forced cooling
10
0
0
50
100
150
200
250
Time (s)
948626
Fig. 22 - Wave Soldering Double Wave Profile
According to J-STD-020 for DIP Devices
Axis Title
10000
300
Max. 260 °C
255 °C
240 °C
217 °C
245 °C
1000
200
Max. 30 s
1st line
2nd line
2nd line
Temperature (°C)
250
150
Max. 120 s
100
Max. 100 s
Max. ramp down 6 °C/s
100
Max. ramp up 3 °C/s
50
10
0
0
50
100
150
200
250
300
Time (s)
19841
Fig. 23 - Lead (Pb)-free Reflow Solder Profile
According to J-STD-020 for SMD Devices
Document Number: 83430
9
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 2.6, 26-Mar-18
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
工商网监
湘ICP备2023018690号
