End of Life November-2022 - Alternative Device: VOD3120A
VOL3120
www.vishay.com
Vishay Semiconductors
Low Profile, 2.5 A Output Current IGBT and MOSFET Driver
FEATURES
A 1
5 VCC
• 2.5 A minimum peak output current
• 48 kV/μs minimum common mode rejection
(CMR) at VCM = 1500 V
4 VO
• Industrial temperature range: -40 °C to +110 °C
• Wide operating VCC range: 15 V to 32 V
C 2
22677
3 VEE
Shield
• ICC = 2.5 mA maximum supply current
• 0.5 μs maximum propagation delay time
• Under voltage lock-out (UVLO) with hysteresis
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
LINKS TO ADDITIONAL RESOURCES
3D 3D
3D Models
Design Tools
APPLICATIONS
Related
Documents
• Isolated IGBT / MOSFET gate driver
DESCRIPTION
• AC and brushless DC motor drives
The VOL3120 consists of an infrared light emitting diode
optically coupled to an integrated circuit with a power
output stage. This optocoupler is ideally suited for driving
power IGBTs and MOSFETs used in motor control and solar
inverter applications. The high operating voltage range of
the output stage provides the drive voltages required by
gate controlled devices. The voltage and current supplied
by this optocoupler makes it ideally suited for directly driving
high power IGBTs with ratings up to 1000 V / 100 A. The low
profile and small footprint of the VOL3120 makes it an ideal
choice for applications where board space and component
height are at a premium, while still offering a high degree of
isolation performance.
• Induction stove top
• Industrial inverters
• Switch mode power supplies (SMPS)
• Uninterruptible power supplies (UPS)
AGENCY APPROVALS
The safety application model number covering all products
in this datasheet is VOL3120. This model number should be
used when consulting safety agency documents.
• UL1577
• cUL
• CQC
• DIN EN 60747-5-5 (VDE 0884) and reinforced insulation
rating available with option “1”
ORDERING INFORMATION
V
O
L
3
1
PART NUMBER
AGENCY CERTIFIED / PACKAGE
UL, cUL, CQC
LSOP-5
UL, cUL, CQC, VDE
LSOP-5
Rev. 1.7, 10-Aug-2022
2
0
-
X
0
0
#
T
PACKAGE OPTION
TAPE
AND
REEL
LSOP-5
10.2 mm
CMR (kV/μs)
48
VOL3120T
48
VOL3120-X001T
Document Number: 82656
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life November-2022 - Alternative Device: VOD3120A
VOL3120
www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
CONDITIONS
SYMBOL
VALUE
UNIT
IF
25
mA
IF(TRAN)
1
A
VR
5
V
Output power dissipation
Pdiss
40
mW
LED junction temperature
Tj
125
°C
IOH(PEAK)
2.5
A
INPUT
Input forward current
Peak transient input current
< 1 μs pulse width, 300 pps
Reverse input voltage
OUTPUT
High peak output current (1)
Low peak output
current (1)
IOL(PEAK)
2.5
A
Supply voltage
(VCC - VEE)
0 to 35
V
Output voltage
VO(PEAK)
0 to VCC
V
Pdiss
220
mW
Tj
125
°C
Storage temperature range
Tstg
-55 to +150
°C
Ambient operating temperature range
Tamb
-40 to +110
°C
Ptot
260
mW
Tsld
260
°C
Output power dissipation
Output junction temperature
OPTOCOUPLER
Total power dissipation
Lead solder temperature
For 10 s, 1.6 mm below seating plane
PSO -Safety Power Dissipation (mW)
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability
(1) Maximum pulse width = 10 μs, maximum duty cycle = 0.2 %. This value is intended to allow for component tolerances for designs with
IO peak minimum = 2.5 A. See applications section for additional details on limiting IOH peak
300
Isi - Safety Input Current (mA)
1000
800
600
400
200
250
200
150
100
50
0
0
-40
0
40
80
120
160
200
Tamb - Ambient Temperature (°C)
Fig. 1 - Safety Power Dissipation vs. Ambient Temperature
Rev. 1.7, 10-Aug-2022
-40 -10
20
50
80
110 140 170 200
Tamb - Ambient Temperature (°C)
Fig. 2 - Safety Input Current vs. Ambient Temperature
Document Number: 82656
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life November-2022 - Alternative Device: VOD3120A
VOL3120
www.vishay.com
Vishay Semiconductors
RECOMMENDED OPERATING CONDITIONS
PARAMETER
SYMBOL
MIN.
MAX.
UNIT
Power supply voltage
VCC - VEE
15
32
V
mA
Input LED current (on)
Input voltage (off)
Operating temperature
IF
10
-
VF(OFF)
-3
0.8
V
Tamb
-40
+110
°C
Axis Title
10000
Total
300
1000
1st line
2nd line
2nd line
Pdiss - Power Dissipation (mW)
400
200
Output
100
100
Input
10
0
-40
-20
0
20
40
60
80
100 120
Tamb - Ambient Temperature (°C)
Fig. 3 - Power Dissipation vs. Ambient Temperature
ELECTRICAL CHARACTERISTICS
PARAMETER
High level output current
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
VO = (VCC - 4 V)
IOH
0.5
-
-
A
VO = (VCC - 15 V)
IOH
2.5
-
-
A
VO = (VEE + 2.5 V)
IOL
0.5
-
-
A
VO = (VEE + 15 V)
IOL
2.5
-
-
A
High level output voltage
IO = -100 mA
VOH
VCC - 4
-
-
V
Low level output voltage
IO = 100 mA
VOL
-
0.2
0.5
V
High level supply current
Output open, IF = 10 mA to 16 mA
ICCH
-
-
2.5
mA
Low level supply current
Output open, VF = -3 V to +0.8 V
ICCL
-
-
2.5
mA
IO = 0 mA, VO > 5 V
IFLH
-
3.4
8
mA
V
Low level output current
Threshold input current low to high
Threshold input voltage high to low
VFHL
0.8
-
-
Input forward voltage
IF = 10 mA
VF
1
1.36
1.6
V
Temperature coefficient of forward voltage
IF = 10 mA
ΔVF/ΔTamb
-
-1.4
-
mV/°C
IR = 10 μA
VBR
5
-
-
V
Input capacitance
Input reverse breakdown voltage
f = 1 MHz, VF = 0 V
CIN
-
45
-
pF
UVLO threshold
VO ≥ 5 V, IF = 10 mA
VUVLO+
11
-
13.5
V
VUVLO-
9.5
-
12
V
UVLOHYS
-
1.6
-
V
CIO
-
0.9
-
pF
UVLO hysteresis
Capacitance (Input to Output)
f = 1 MHz, VF = 0 V
Note
• Minimum and maximum values were tested over recommended operating conditions (Tamb = -40 °C to +110 °C, IF(ON) = 10 mA to 16 mA,
VF(OFF) = -3 V to 0.8 V, VCC = 15 V to 32 V, VEE = ground) unless otherwise specified. Typical values are characteristics of the device and are
the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. All typical values
were measured at Tamb = 25 °C and with VCC - VEE = 32 V
Rev. 1.7, 10-Aug-2022
Document Number: 82656
3
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life November-2022 - Alternative Device: VOD3120A
VOL3120
www.vishay.com
Vishay Semiconductors
SWITCHING CHARACTERISTICS
PARAMETER
SYMBOL
MIN.
TYP.
MAX.
UNIT
Propagation delay time to logic low output Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, duty cycle = 50 %
TEST CONDITION
tPHL
0.1
0.25
0.5
μs
Propagation delay time to logic high output Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, duty cycle = 50 %
tPLH
0.1
0.25
0.5
μs
Pulse width distortion
Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, duty cycle = 50 %
PWD
-
-
0.3
μs
Rise time
Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, duty cycle = 50 %
tr
-
0.1
-
μs
Fall time
Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, duty cycle = 50 %
tf
-
0.1
-
μs
UVLO turn on delay
VO > 5 V, IF = 10 mA
TUVLO-ON
-
0.8
-
μs
UVLO turn off delay
VO < 5 V, IF = 10 mA
TUVLO-OFF
-
0.6
-
μs
Note
• Minimum and maximum values were tested over recommended operating conditions (Tamb = -40 °C to +110 °C, IF(ON) = 10 mA to 16 mA,
VF(OFF) = -3 V to 0.8 V, VCC = 15 V to 32 V, VEE = ground) unless otherwise specified. Typical values are characteristics of the device and are
the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. All typical values
were measured at Tamb = 25 °C and with VCC - VEE = 32 V
IF = 10 mA
to 16 mA
1
500 Ω
5
IF
0.1 μF
90 %
50 %
10 Ω
2
tf
tr
VO
4
10 kHz
50 %
duty cycle
VCC = 15 V
to 32 V
10 nF
3
10 %
OUT
tPHL
tPLH
Fig. 4 - tPLH, tPHL, tr and tf Test Circuit and Waveforms
COMMON MODE TRANSIENT IMMUNITY
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Common mode transient immunity at
logic high output
Tamb = 25 °C, IF = 10 mA to 16 mA,
VCM = 1500 V, VCC = 32 V
|CMH|
48
-
-
kV/μs
Common mode transient immunity at
logic low output
Tamb = 25 °C, VCM = 1500 V,
VCC = 32 V, VF = 0 V
|CML|
48
-
-
kV/μs
Note
• Minimum and maximum values were tested over recommended operating conditions (Tamb = -40 °C to +110 °C, IF(ON) = 10 mA to 16 mA,
VF(OFF) = -3 V to 0.8 V, VCC = 15 V to 32 V, VEE = ground) unless otherwise specified. Typical values are characteristics of the device and are
the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. All typical values
were measured at Tamb = 25 °C and with VCC - VEE = 32 V.
IF
A
R
B
1
VCM
5
0.1 μF
5V
4
VO
V
dV
= CM
Δt
dt
VCC = 32 V
0V
Δt
VO
2
3
VOH
Switch at A: IF = 10 mA
O
VOL
Switch at B: IF = 0 mA
VCM = 1500 V
Fig. 5 - CMR Test Circuit and Waveforms
Rev. 1.7, 10-Aug-2022
Document Number: 82656
4
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life November-2022 - Alternative Device: VOD3120A
VOL3120
www.vishay.com
Vishay Semiconductors
SAFETY AND INSULATION RATINGS
PARAMETER
TEST CONDITION
Climatic classification
SYMBOL
VALUE
According to IEC 68 part 1
Comparative tracking index
Maximum rated withstanding isolation voltage
UNIT
40 / 110 / 21
CTI
175
VISO
5300
VRMS
VIOTM
8000
V
t = 1 min
Maximum transient isolation voltage
Maximum repetitive peak isolation voltage
VIORM
1050
V
Tamb = 25 °C, VDC = 500 V
RIO
≥ 1012
Ω
Tamb = 100 °C, VDC = 500 V
RIO
≥ 1011
Ω
Output safety power
PSO
900
mW
Input safety current
ISI
250
mA
Safety temperature
TS
Isolation resistance
175
°C
Creepage distance
≥8
mm
Clearance distance
≥8
mm
DTI
≥ 0.4
mm
Input to output test voltage, method B
VIORM x 1.875 = VPR, 100 % production test
with tM = 1 s, partial discharge < 5 pC
VPR
1969
Vpeak
Input to output test voltage, method A
VIORM x 1.6 = VPR, 100 % production test
with tM = 10 s, partial discharge < 5 pC
VPR
1680
Vpeak
Insulation thickness
Environment (pollution degree in accordance to DIN VDE 0109)
2
Note
• As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of protective circuits.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Axis Title
Axis Title
100
10000
10000
35
Tamb = 0 °C
10
Tamb = 25 °C
Tamb = 50 °C
100
Tamb = 85 °C
25
IFLH
1000
IFHL
1st line
2nd line
1000
2nd line
VO - Output Voltage (V)
Tamb = -40 °C
Tamb = -25 °C
1st line
2nd line
2nd line
IF - Forward Current (mA)
30
20
15
100
10
Tamb = 110 °C
5
10
1
0.8
1.0
1.2
1.4
1.6
1.8
VCC = 15 V to 32 V,
VEE = 0 V
10
0
0
1
2
3
4
5
6
VF - Forward Voltage (V)
IF - Forward Current (mA)
Fig. 6 - Forward Current vs. Forward Voltage
Fig. 7 - Output Voltage vs. Forward Current
Rev. 1.7, 10-Aug-2022
Document Number: 82656
5
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life November-2022 - Alternative Device: VOD3120A
VOL3120
www.vishay.com
Vishay Semiconductors
Axis Title
Axis Title
2
IFHL
100
1
VCC = 15 V to 32 V,
VEE = 0 V
10
0
-40
-20
0
20
40
60
80
-1
Tamb = 110 °C
-2
-3
100
-4
IF = 7 mA to 16 mA,
Iout = -100 mA,
VCC = 15 V to 32 V,
VEE = 0 V
-5
10
-6
100 120
0
0.5
1.0
1.5
2.0
2.5
3.0
Tamb - Ambient Temperature (°C)
IOH - High Level Output Current (A)
Fig. 8 - Threshold Current vs. Ambient Temperature
Fig. 11 - High Level Voltage Drop vs. High Level Output Current
Axis Title
Axis Title
10000
1st line
2nd line
1000
100
26
IF = 10 mA, Iout = -100 mA,
VCC = 32 V, VEE = 0 V
10
24
-40
-20
0
20
40
60
80
2nd line
(VOL - VEE) - Low Level Voltage Drop (V)
30
28
10000
6
VF = 0 V,
VCC = 15 V to 32 V,
VEE = 0 V
5
Tamb = -40 °C
4
1000
Tamb = 25 °C
3
1st line
2nd line
32
2nd line
VOH - High Level Output Voltage (V)
1000
Tamb = 25 °C
Tamb = -40 °C
1st line
2nd line
1000
2nd line
(VOH - VCC) - High Level Voltage Drop (V)
IFLH
1st line
2nd line
2nd line
IFLH, IFHL - Threshold Current (mA)
4
3
10000
0
10000
5
Tamb = 110 °C
100
2
1
10
0
100 120
0
0.5
1.0
1.5
2.0
2.5
3.0
Tamb - Ambient Temperature (°C)
IOL - Low Level Output Current (A)
Fig. 9 - High Level Output Voltage vs. Ambient Temperature
Fig. 12 - Low Level Voltage Drop vs. Low Level Output Current
Axis Title
Axis Title
0.4
100
0.2
10
0
-40
-20
0
20
40
60
80
100 120
Rg = 10 Ω, Cg = 10 nF,
f = 10 kHz, duty cycle = 50 %,
VCC = 32 V, VEE = 0 V
400
1000
300
1st line
2nd line
1000
2nd line
tPHL, tPLH - Propagation Delay (ns)
0.8
1st line
2nd line
2nd line
VOL - Low Level Output Voltage (V)
VF = 0 V, Iout = 100 mA,
VCC = 15 V to 32 V, VEE = 0 V
0.6
10000
500
10000
1.0
tPHL
200
100
tPLH
100
10
0
5
7
9
11
13
15
Tamb - Ambient Temperature (°C)
IF - Forward Current (mA)
Fig. 10 - Low Level Output Voltage vs. Ambient Temperature
Fig. 13 - Propagation Delay vs. Forward Current
Rev. 1.7, 10-Aug-2022
Document Number: 82656
6
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life November-2022 - Alternative Device: VOD3120A
VOL3120
www.vishay.com
Vishay Semiconductors
Axis Title
Axis Title
10000
tPHL
200
100
tPLH
100
10
0
-40
-20
0
20
40
60
80
Rg = 10 Ω,
f = 10 kHz, duty cycle = 50 %,
IF = 9 mA, VCC = 32 V, VEE = 0 V
400
1000
300
tPHL
200
100
tPLH
100
10
0
100 120
0
20
40
80
100
Cg - Load Capacitance (nF)
Fig. 14 - Propagation Delay vs. Ambient Temperature
Fig. 17 - Propagation Delay vs. Load Capacitance
Axis Title
Axis Title
10000
tPHL
200
100
tPLH
100
10
0
15
20
25
IF = 7 mA to 16 mA for ICCH,
VF = 0 V for ICCL,
VEE = 0 V
4
1000
3
1st line
2nd line
1000
300
2nd line
ICC - Supply Current (mA)
Rg = 10 Ω, Cg = 10 nF,
f = 10 kHz, duty cycle = 50 %,
IF = 10 mA, VEE = 0 V
400
10000
5
1st line
2nd line
2
ICCH
100
1
ICCL
0
30
15
10
20
25
30
VCC - Supply Voltage (V)
VCC - Supply Voltage (V)
Fig. 15 - Propagation Delay vs. Supply Voltage
Fig. 18 - Supply Current vs. Supply Voltage
Axis Title
Axis Title
10000
IF = 9 mA, Cg = 10 nF,
f = 10 kHz, duty cycle = 50 %,
VCC = 15 V, VEE = 0 V
400
1000
1st line
2nd line
tPHL
300
200
100
tPLH
100
10000
5
2nd line
ICC - Supply Current (mA)
500
IF = 7 mA to 16 mA for ICCH,
VF = 0 V for ICCL,
VCC = 32 V, VEE = 0 V
4
1000
3
2
1st line
2nd line
2nd line
tPHL, tPLH - Propagation Delay (ns)
60
Tamb - Ambient Temperature (°C)
500
2nd line
tPHL, tPLH - Propagation Delay (ns)
1st line
2nd line
1000
300
2nd line
tPHL, tPLH - Propagation Delay (ns)
Rg = 10 Ω, Cg = 10 nF,
f = 10 kHz, duty cycle = 50 %,
IF = 10 mA, VCC = 32 V, VEE = 0 V
400
10000
500
1st line
2nd line
2nd line
tPLH, tPHL - Propagation Delay (ns)
500
ICCH
100
1
ICCL
10
0
0
10
20
30
40
50
10
0
-40
-20
0
20
40
60
80
100 120
Rg - Load Resistance (Ω)
Tamb - Ambient Temperature (°C)
Fig. 16 - Propagation Delay vs. Load Resistance
Fig. 19 - Supply Current vs. Ambient Temperature
Rev. 1.7, 10-Aug-2022
Document Number: 82656
7
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life November-2022 - Alternative Device: VOD3120A
VOL3120
www.vishay.com
Vishay Semiconductors
+ 0.30
- 0.40
10.20
3.80 typ.
7.50 ± 0.20
0.20
+ 0.10
- 0.05
0.10 ± 0.10
4.10 max.
2.50
2.80 max.
PACKAGE DIMENSIONS (in millimeters)
3
0.45 ± 0.1
0.70
2.54 nom.
+ 0.30
- 0.40
Leads coplanarity 0.10 max.
1.27 nom.
Possible footprint
4
3
3
0.90
2.54
5
8.20
10.80
1
2
Pin no. 1 identification
Fig. 20 - Package Drawing
PACKAGE MARKING
3120X1
V YWW 68
Fig. 21 - Example of VOL3120-X001T
Notes
• “YWW” is the date code marking (Y = year code, WW = week code)
• “X1” is only marked on option “1” parts
• • Tape and reel suffix (T) is not part of the package marking
Rev. 1.7, 10-Aug-2022
Document Number: 82656
8
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life November-2022 - Alternative Device: VOD3120A
VOL3120
www.vishay.com
Vishay Semiconductors
PACKING INFORMATION (tape and reel)
Top cover tape
Embossed carrier
Embossment
17998
Fig. 22 - Tape and Reel Shipping Medium
2.00 ± 0.10
4.00 ± 0.10
1.55 ± 0.05
1.75 ± 0.10
0.30 ± 0.05
7.50 ± 0.10
Y
1.50
8.00 ± 0.10
+ 0.20
0.00
4.30 ± 0.10
16.00 ± 0.30
Y
CL
2.75 ± 0.10
3.20 ± 0.10
Section Y - Y
Note:
1. Cumulative tolerance of 10 spocket holes is ± 0.20.
Fig. 23 - Tape and Reel Packing (2000 pieces on reel)
SOLDER PROFILE
HANDLING AND STORAGE CONDITIONS
ESD level: HBM class 2
Axis Title
10000
300
Floor life: unlimited
Max. 260 °C
255 °C
240 °C
217 °C
Conditions: Tamb < 30 °C, RH < 85 %
245 °C
Moisture sensitivity level 1, according to J-STD-020
1000
200
Max. 30 s
1st line
2nd line
2nd line
Temperature (°C)
250
150
Max. 120 s
100
Max. 100 s
Max. ramp down 6 °C/s
100
Max. ramp up 3 °C/s
50
10
0
0
50
100
150
200
250
300
Time (s)
19841
Fig. 24 - Lead (Pb)-free Reflow Solder Profile
According to J-STD-020
Rev. 1.7, 10-Aug-2022
Document Number: 82656
9
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
工商网监
湘ICP备2023018690号
