VOL617A

VOL617A www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package FEATURES • Low profile package A 1 4 C C 2 3 E • High collector emitter voltage, VCEO = 80 V • Isolation test voltage, 5000 VRMS • Isolation voltage VIORM = 1050 Vpeak • Low coupling capacitance • High common mode transient immunity 17295-6 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION The VOL617A has a GaAs infrared emitting diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a 4 pin LSOP wide body package. APPLICATIONS It features a high current transfer ratio, low coupling capacitance, and high isolation voltage. • Battery powered equipment The coupling device is designed for signal transmission between two electrically separated circuits. • Programmable controllers • Telecom • Industrial controls • Office machines AGENCY APPROVALS (All parts are certified under base model VOL617A) • UL1577, file no. E76222 • cUL CSA 22.2 bulletin 5A, double protection • DIN EN 60747-5-5 (VDE 0884-5), available with option 1 • BSI: EN 60065:2002, EN 60950-1:2006 • FIMKO EN60950-1 • CQC: GB8898-2011, GB4943.1-2011 ORDERING INFORMATION V O L 6 1 7 A PART NUMBER - # X CTR BIN 0 0 1 PACKAGE OPTION T LSOP-4 TAPE AND REEL 10.2 mm CTR (%) AGENCY CERTIFIED/ PACKAGE 5 mA UL, cUL, BSI, FIMKO, CQC 50 to 600 40 to 80 63 to 125 100 to 200 160 to 320 80 to 160 130 to 260 4 pin LSOP, mini-flat, long creepage VOL617AT VOL617A-1T VOL617A-2T VOL617A-3T VOL617A-4T - - UL, cUL, BSI, FIMKO, CQC, VDE (option 1) 50 to 600 40 to 80 63 to 125 100 to 200 160 to 320 80 to 160 130 to 260 4 pin LSOP, mini-flat, long creepage VOL617AX001T VOL617A1X001T VOL617A2X001T VOL617A3X001T VOL617A4X001T VOL617A7X001T VOL617A8X001T Document Number: 82424 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.0, 13-Oct-15 VOL617A www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT tp < 10 μs VR Pdiss IFSM IF Tj 6 100 1.5 60 125 V mW A mA °C VCEO VECO IC IC Pdiss Tj 80 7 50 100 150 125 V V mA mA mW °C INPUT Reverse voltage Power dissipation Forward surge current Forward current Junction temperature OUTPUT Collector emitter voltage Emitter collector voltage Collector current Ptot - Total Power Dissipation (mW) tp/T = 0.5, tp < 10 ms Power dissipation Junction temperature COUPLER 250 mW Total power dissipation Ptot -55 to +125 °C Storage temperature range Tstg -55 to +110 °C Ambient temperature range Tamb ≤ 10 s Tsld 260 °C Soldering temperature (1) Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices. 300 Coupled device 250 200 Phototransistor 150 100 IR-diode 50 0 0 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 1 - Total Power Dissipation vs. Ambient Temperature ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER INPUT Forward voltage Capacitance Reverse current OUTPUT Collector emitter leakage current Collector emitter capacitance COUPLER Collector emitter saturation voltage Coupling capacitance TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IF = 5 mA VR = 0 V, f = 1 MHz VR = 6 V VF CO IR - 1.16 45 1.5 100 V pF μA VCE = 10 V, IF = 0 A VCE = 5 V, f = 1 MHz ICEO CCE - 10 7 200 - nA pF IC = 1.0 mA, IF = 5 mA f = 1 MHz VCEsat CC - 0.25 0.25 0.4 - V pF Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Document Number: 82424 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.0, 13-Oct-15 VOL617A www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION IC/IF IF = 5 mA, VCE = 5 V PART SYMBOL MIN. TYP. MAX. UNIT VOL617A CTR 50 - 600 % VOL617A-1 CTR 40 - 80 % VOL617A-2 CTR 63 - 125 % VOL617A-3 CTR 100 - 200 % VOL617A-4 CTR 160 - 320 % VOL617A-7 CTR 80 - 160 % VOL617A-8 CTR 130 - 260 % SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Turn on time Rise time Turn off time Fall time TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT VCC = 5 V, IC = 2 mA, RL = 100 Ω VCC = 5 V, IC = 2 mA, RL = 100 Ω VCC = 5 V, IC = 2 mA, RL = 100 Ω VCC = 5 V, IC = 2 mA, RL = 100 Ω ton tr toff tf - 6 3.5 5.5 5 - μs μs μs μs VCC = 5 V Input Input pulse RL 10 % VOUT Output pulse 90 % tr tf t off t on isfh618a_10 isfh618a_12 Fig. 2 - Test Circuit Fig. 3 - Test Circuit and Waveforms SAFETY AND INSULATION RATINGS PARAMETER Partial discharge test voltage - routine test Partial discharge test voltage lot test (sample test) Maximum withstanding isolation voltage TEST CONDITION SYMBOL VALUE UNIT 100 %, ttest = 1 s Vpd 2 kV tTr = 60 s, ttest = 10 s, (see figure 4) VIOTM 8 kV Vpd 1.68 kV t = 1 min VISO 5000 VRMS VIORM 1050 Vpeak VIO = 500 VDC, Tamb = 25 °C RIO 1012 Ω VIO = 500 VDC, Tamb = 100 °C RIO 1011 Ω RIO 109 Ω Isi 130 mA PSO 265 mW Insulation voltage Insulation resistance Safety rating - maximum input current Safety rating - maximum power dissipation Rated impulse voltage VIO = 500 VDC, Tamb = 150 °C (construction test only) VIOTM 8 kV Safety rating - maximum ambient temperature Tsi 150 °C Comparative tracking index CTI 275 Clearance distance 8 Creepage distance 8 mm 0.4 mm Insulation distance (internal) DTI mm Note • According to DIN EN 60747-5-5 (VDE 0884-5), § 7.4.3.8.2, (see figure 4). This optocoupler is suitable for safe electrical isolation only within the safety ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits. Document Number: 82424 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.0, 13-Oct-15 VOL617A www.vishay.com Vishay Semiconductors VIOTM 300 t1, t2 t3 , t4 ttest tstres Phototransistor PSO (mW) 250 200 = 1 s to 10 s =1s = 10 s = 12 s Vpd 150 VIOWM VIORM 100 IR-diode Isi (mA) 50 0 0 0 25 50 75 125 100 t3 ttest t4 150 13930 Tsi - Safety Temperature (°C) tTr = 60 s t1 t2 t stres t Fig. 4 - Derating Diagram Fig. 5 - Test Pulse Diagram for Sample Test according to DIN EN 60747-5-5 TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 10 000 IF = 0 mA Tamb = 110 °C Tamb = 75 °C Tamb = 25 °C Tamb = 0 °C Tamb = - 55 °C 10 ICE0 - Leakage Current (nA) IF - Forward Current (mA) 100 1 0.1 1000 VCE = 40 V 100 10 VCE = 24 V 1 0.1 VCE = 12 V 0.01 0.001 0.6 0.8 1.0 1.2 1.4 1.6 -60 -40 -20 VF - Forward Voltage (V) 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 6 - Forward Current vs. Forward Voltage Fig. 8 - Collector Emitter Current vs. Ambient Temperature 30 55 IF = 35 mA 50 IC - Collector Current (mA) IC - Collector Current (mA) 0 45 IF = 30 mA 40 35 IF = 25 mA 30 IF = 20 mA 25 20 IF = 15 mA 15 10 IF = 10 mA IF = 1 mA 5 IF = 5 mA 1 2 3 4 5 6 7 8 IF = 25 mA 20 IF = 10 mA 15 10 IF = 5 mA IF = 1 mA 5 IF = 2 mA 0 0 0 25 9 10 VCE - Collector Emitter Voltage (V) Fig. 7 - Collector Current vs. Collector Emitter Voltage 0 0.1 0.2 0.3 0.4 VCE - Collector Emitter Voltage (V) Fig. 9 - Collector Current vs. Collector Emitter Voltage Document Number: 82424 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.0, 13-Oct-15 VOL617A Vishay Semiconductors 1.2 1.2 IF = 5 mA NCTR - Normalized CTR (sat) NCTR - Normalized CTR (non-saturated) www.vishay.com 1.0 0.8 0.6 0.4 0.2 Normalized to CTR value: IF = 5 mA, VCE = 5 V, Tamb = 25 °C -60 -40 -20 0 20 40 60 0.8 0.4 Tamb = 25 °C 0.2 Tamb = 75 °C Tamb = 100 °C 80 100 120 0.1 Fig. 10 - Normalized Current Transfer Ratio (non-saturated) vs. Ambient Temperature 100 0 VCE = 5 V RL = 100 Ω -20 1.0 Phase Angle (deg) NCTR - Normalized CTR (sat) 10 Fig. 13 - Normalized Current Transfer Ratio (saturated) vs. Forward Current 1.2 0.8 0.6 0.4 Normalized to CTR value: IF = 5 mA, VCE = 5 V, Tamb = 25 °C -40 RL = 1000 Ω -60 -80 -100 -120 -140 0 -160 -60 -40 -20 0 20 40 60 80 100 120 1 Tamb - Ambient Temperature (°C) 10 100 1000 f - Frequency (kHz) Fig. 14 - Cut-Off Frequency vs. Phase Angle Fig. 11 - Normalized Current Transfer Ratio (saturated) vs. Ambient Temperature 1.4 1000 Tamb = 0 °C 1.2 VCC = 5 V Tamb = -55 °C Tamb = 25 °C 1.0 f CTR (kHz) NCTR - Normalized CTR (NS) 1 IF - Forward Current (mA) Tamb - Ambient Temperature (°C) 0.2 Tamb = -55 - °C 0.6 0 0 Tamb = 0 °C VCE = 0.4 V Normalized to: IF = 5 mA, VCE = 5 V, Tamb = 25 °C 1.0 0.8 0.6 Tamb = 75 °C 0.4 Tamb = 100 °C 0.2 100 10 Normalized to: IF = 5 mA, VCE = 5 V 0 1 0.1 1 10 100 IF - Forward Current (mA) Fig. 12 - Normalized Current Transfer Ratio (non-saturated) vs. Forward Current 0.1 1 10 100 IC (mA) Fig. 15 - Cut-Off Frequency vs. Collector Current Document Number: 82424 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.0, 13-Oct-15 VOL617A www.vishay.com ton, toff - Switching Time (μs) 1000 Vishay Semiconductors VCE = 5 V, IF = 2 mA 100 toff (μs) 10 ton (μs) 1 0.1 0 5 10 15 20 RL - Load Resistance (kΩ) Fig. 16 - Switching Time vs. Load Resistance 1.0 VCEsat - Collector Emitter Saturation Voltage (V) 20 % used 0.8 CTR = 50 % used 0.6 0.4 0.2 10 % used 0 1 100 10 IC - Collector Current (mA) 95 11028 ton/toff - Turn-On/Turn-Off Time (µs) Fig. 17 - Collector Emitter Saturation Voltage vs. Collector Current 50 Saturated operation VS = 5 V RL = 1 kΩ 40 30 toff 20 10 ton 0 0 95 11031 5 10 15 20 IF - Forward Current (mA) Fig. 18 - Turn-On/Turn-Off Time vs. Forward Current Document Number: 82424 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.0, 13-Oct-15 VOL617A www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS (in millimeters) 2.30 max. 4.10 max. 10.20 3.80 + 0.30 - 0.40 0.20 2.00 + 0.10 - 0.05 7.50 ± 0.20 0.10 Seating plane 0.45 ± 0.1 0.70 + 0.30 - 0.40 2.54 nom. 4 3 2.54 Possible footprint 0.90 8.20 1 22533 10.80 technical drawings according to DIN specifications 2 Pin no. 1 identification PACKAGE MARKING (example of VOL617A-3X001T) 617A-3X1 V YWW 68 Notes • Only option 1 is reflected in the package marking with the characters “X1”. • Tape and reel suffix (T) is not part of the package marking. TAPE AND REEL DIMENSIONS (in millimeters) Ø 1.55 2.7 4 2 0.3 7.5 Tape slot in core 1.75 ESD sticker 10.6 16 330 (13") 5° 4.25 8 Ø 1.6 Regular, special or bar code label 17999 Fig. 19 - Reel Dimensions (3000 units per reel) 2.3 Direction of pulling out technical drawings according to DIN specification 22662 Fig. 20 - Tape Dimensions Document Number: 82424 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.0, 13-Oct-15 VOL617A www.vishay.com Vishay Semiconductors SOLDER PROFILE HANDLING AND STORAGE CONDITIONS ESD level: HBM class 2 300 255 °C 240 °C 217 °C 250 Temperature (°C) max. 260 °C 245 °C Floor life: unlimited Conditions: Tamb < 30 °C, RH < 85 % Moisture sensitivity level 1, according to J-STD-020 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s 50 max. ramp up 3 °C/s 0 0 19841 50 100 150 200 250 300 Time (s) Fig. 21 - Lead (Pb)-free Reflow Solder Profile according to J-STD-020 Document Number: 82424 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.0, 13-Oct-15 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VOL617A-1X001T VOL617A-2X001T VOL617A-3X001T VOL617A-4X001T VOL617A-1X001 VOL617A-2X001 VOL617A-3X001 VOL617A-4X001 VOL617A-3T VOL617A-2T VOL617A-4T VOL617A-1T VOL617A-8X001T