VOM617A-X001T

VOM617A www.vishay.com Vishay Semiconductors Low Input Current, Phototransistor Output, SOP-4, Mini-Flat Package FEATURES A 1 4 C C 2 3 E • • • • • • • • • i179089 LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models Design Tools Related Documents Operating temperature from -55 °C to +110 °C SOP-4 mini-flat package Isolation test voltage, 3750 VRMS Low saturation voltage Fast switching times Low coupling capacitance End-stackable, 0.100" (2.54 mm) spacing CTR range 50 % to 600 %, IF = 5 mA Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS DESCRIPTION • • • • • The 110 °C rated VOM617A has a GaAs infrared emitting diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a 4 pin 100 mil lead pitch miniflat package. It features a high current transfer ratio, low coupling capacitance, and high isolation voltage. PLCs Telecommunication Lighting control system Solar inverters AC drives AGENCY APPROVALS These coupling devices are designed for signal transmission between two electrically separated circuits. (All parts are certified under base model VOM617A) • UL1577 • cUL • DIN EN 60747-5-5 (VDE 0884-5), available with option 1 • CQC • FIMKO ORDERING INFORMATION V O M 6 1 7 A PART NUMBER - # CTR BIN AGENCY CERTIFIED/ PACKAGE UL, cUL, FIMKO, CQC SOP-4, mini-flat VDE, UL, cUL, FIMKO, CQC (option 1) SOP-4, mini-flat X 0 0 1 VDE OPTION T # SOP-4 TAPE AND REEL ≥5 CTR (%) 5 mA 50 to 600 63 to 125 100 to 200 160 to 320 250 to 500 80 to 160 130 to 260 200 to 400 VOM617AT VOM617A-2T VOM617A-3T VOM617A-4T VOM617A-6T VOM617A-7T VOM617A-8T VOM617A-9T 50 to 600 63 to 125 100 to 200 160 to 320 250 to 500 80 to 160 130 to 260 200 to 400 VOM617AX001T VOM617A2X001T VOM617A3X001T VOM617A4X001T VOM617A6X001T VOM617A7X001T VOM617A8X001T, VOM617A8X001T2 (1) VOM617A9X001T Notes • Available only on tape and reel (1) Product is rotated 180° in tape and reel cavity Document Number: 83446 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.4, 24-Sep-2020 VOM617A www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT DC forward current IF 60 mA Reverse voltage VR 6 V Pdiss 70 mW IFSM 2.5 A Collector emitter voltage VCEO 80 V Emitter collector voltage VECO INPUT Power dissipation tp ≤ 10 μs Surge forward current OUTPUT Collector current IC tp ≤ 1 ms Power dissipation Pdiss 7 V 50 mA 100 mA 150 mW COUPLER Total power dissipation Ptot 170 mW Operating temperature range Tamb -55 to +110 °C Storage temperature range Tstg -55 to +150 °C Tj 125 °C Tsld 260 °C Junction temperature Soldering temperature (1) Ptot - Total Power Dissipation (mW) Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability (2) See “Assembly Instructions” for surface mounted devices (www.vishay.com/doc?80054) 200 Coupled device 150 100 Phototransistor IR-diode 50 0 0 25 50 75 100 125 Tamb - Ambient Temperature (°C) Fig. 1 - Total Power Dissipation vs. Ambient Temperature Document Number: 83446 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.4, 24-Sep-2020 VOM617A www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER INPUT Forward voltage TEST CONDITION SYMBOL MIN. IF = 5 mA VF Reverse current VR = 6 V IR VR = 0 V, f = 1 MHz Cj Capacitance OUTPUT Collector emitter leakage current Collector emitter breakdown voltage Emitter collector breakdown voltage Collector emitter capacitance TYP. MAX. UNIT - 1.1 1.6 V - 0.01 10 μA - 9 - pF VCE = 20 V ICEO - 0.3 100 nA IC = 100 μA BVCEO 80 - - V IE = 10 μA BVECO 7 - - V VCE = 5 V, f = 1 MHz CCE - 2.8 - pF pF COUPLER Coupling capacitance Collector emitter saturation voltage Cut-off frequency f = 1 MHz CIO - 0.3 - IF = 10 mA, IC = 2.5 mA VCEsat - 0.12 0.4 V IF = 10 mA, VCC = 5 V, RL = 100 Ω fctr - 110 - kHz Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER IC/IF TEST CONDITION IF = 5 mA, VCE = 5 V PART SYMBOL MIN. TYP. MAX. UNIT VOM617A CTR 50 - 600 % VOM617A-2 CTR 63 - 125 % VOM617A-3 CTR 100 - 200 % VOM617A-4 CTR 160 - 320 % VOM617A-6 CTR 250 - 500 % VOM617A-7 CTR 80 - 160 % VOM617A-8 CTR 130 - 260 % VOM617A-9 CTR 200 - 400 % SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Rise and fall time tr - 3 - μs Fall time tf - 3 - μs ton - 6 - μs toff - 4 - μs tr - 7 - μs tf - 12 - μs ton - 9 - μs toff - 15 - μs NON-SATURATED Turn-on time IC = 2 mA, VCC = 5 V, RL = 100 Ω Turn-off time SATURATED Rise and fall time Fall time Turn-on time Turn-off time IF = 1.6 mA, VCC = 5 V, RL = 1.9 kΩ Document Number: 83446 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.4, 24-Sep-2020 VOM617A www.vishay.com Vishay Semiconductors VCC = 5 V Input Input pulse RL 10 % VOUT Output pulse 90 % tr Fig. 2 - Test Circuit tf t off t on Fig. 3 - Test Circuit and Waveforms SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION Climatic classification According to IEC 68 part 1 Pollution degree According to DIN VDE 0109 Comparative tracking index SYMBOL VALUE UNIT 55 / 110 / 21 2 CTI 175 Maximum rated withstanding isolation voltage According to UL1577, t = 1 min VISO 3750 Maximum transient isolation voltage According to DIN EN 60747-5-5 VIOTM 6000 Vpeak Maximum repetitive peak isolation voltage According to DIN EN 60747-5-5 VIORM 565 Vpeak VIO = 500 V, Tamb = 25 °C RIO ≥ 1012 Ω RIO ≥ Isolation resistance Output safety power VIO = 500 V, Tamb = 100 °C 1011 VRMS Ω PSO 300 mW Input safety current ISI 200 mA Input safety temperature TS 175 °C ≥5 mm Creepage distance Clearance distance Insulation thickness DTI ≥5 mm ≥ 0.4 mm Note • As per DIN EN 60747-5-5 (VDE 0884), § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits Document Number: 83446 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.4, 24-Sep-2020 VOM617A www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 14 Tamb = 110 °C Tamb = 75 °C Tamb = 25 °C Tamb = 0 °C Tamb = - 55 °C 10 IC - Collector Current (mA) IF - Forward Current (mA) 100 1 IF = 10 mA 12 10 8 6 4 0.6 0.8 1.0 1.2 1.4 1.6 0 IF = 2 mA 55 IF = 35 mA 45 IF = 30 mA 40 35 IF = 25 mA 30 IF = 20 mA 25 20 IF = 15 mA 15 10 IF = 10 mA IF = 1 mA 5 IF = 5 mA 0 0 1 2 3 4 5 6 7 8 9 10 10 000 IF = 0 mA 1000 VCE = 40 V 100 10 VCE = 24 V 0.1 VCE = 12 V 0.01 0.001 IF = 5 mA, VCE = 5 V 1.0 0.8 0.6 0.4 0.2 0 Normalized to CTR value: IF = 5 mA, VCE = 5 V, Tamb = 25 °C -60 -40 -20 20 40 60 0 20 40 60 80 100 120 Fig. 8 - Normalized Current Transfer Ratio (non-saturated) vs. Ambient Temperature 1.2 IF = 5 mA, VCE = 0.4 V 1.0 0.8 0.6 0.4 0.2 0 Normalized to CTR value: IF = 5 mA, VCE = 5 V, Tamb = 25 °C -60 -40 -20 0 0.4 Tamb - Ambient Temperature (°C) NCTR - Normalized CTR (saturated) Fig. 5 - Collector Current vs. Collector Emitter Voltage (non-saturated) -60 -40 -20 0.3 1.2 VCE - Collector Emitter Voltage (non-sat) (V) 1 0.2 Fig. 7 - Collector Current vs. Collector Emitter Voltage (saturated) NCTR - Normalized CTR (non-saturated) Fig. 4 - Forward Voltage vs. Forward Current 50 0.1 VCE - Collector Emitter Voltage (sat) (V) VF - Forward Voltage (V) IC - Collector Current (mA) IF = 1 mA 2 0 0.1 ICE0 - Leakage Current (nA) IF = 5 mA 0 20 40 60 80 100 120 80 100 120 Tamb - Ambient Temperature (°C) Tamb - Ambient Temperature (°C) Fig. 6 - Leakage Current vs. Ambient Temperature Fig. 9 - Normalized Current Transfer Ratio (saturated) vs. Ambient Temperature Document Number: 83446 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.4, 24-Sep-2020 VOM617A Vishay Semiconductors 0 0.40 IF = 10 mA 0.35 0.30 Ic = 5 mA 0.25 0.20 Ic = 2 mA 0.15 0.10 Ic = 1 mA 0.05 VCE = 5 V -20 Phase Angle (°) VCEsat - Collector Emitter Voltage (V) www.vishay.com RL = 100  -40 RL = 1000  -60 -80 -100 -120 -140 -160 0 -60 -40 -20 0 20 40 60 1 80 100 120 10 100 1000 Tamb - Ambient Temperature (°C) f - Cut-off Frequency (kHz) Fig. 10 - Collector Emitter Voltage vs. Ambient Temperature (saturated) Fig. 13 - FCTR vs. Phase Angle 1.4 VCC = 5 V Tamb = - 55 °C Tamb = 25 °C 1.0 FCTR (kHz) NCTR - Normalized CTR (non-saturated) 1000 VCE = 5 V Tamb = 0 °C 1.2 0.8 0.6 Tamb = 75 °C 0.4 Tamb = 100 °C 100 10 Normalized to: IF = 5 A, VCE = 5 V, Tamb = 25 °C 0.2 0 1 0.1 1 10 0.1 100 1 10 100 IC (mA) Fig. 11 - Normalized CTR (non-saturated) vs. Forward Current Fig. 14 - FCTR vs. Collector Current 1.2 1.0 0.8 VCE = 0.4 V Normalized to: IF = 5 mA, VCE = 5 V, Tamb = 25 °C 1000 Tamb = 0 °C VCE = 5 V, IF = 2 mA Tamb = - 55 °C 0.6 0.4 Tamb = 25 °C 0.2 Tamb = 75 °C Tamb = 100 °C 0 ton, toff Switching Time (μs) NCTR - Normalized CTR (saturated) IF - Forward Current (mA) 100 toff (μs) 10 1 ton (μs) 0.1 0.1 1 10 100 IF - Forward Current (mA) Fig. 12 - Normalized CTR (saturated) vs. Forward Current 0 5 10 15 20 RL - Load Resistance (kΩ) Fig. 15 - Switching Time vs. Load Resistance Document Number: 83446 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.4, 24-Sep-2020 VOM617A www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 2.54 ± 0.25 4 3 2 6.5 0.10 ± 0.1 2.00 ± 0.2 3.85 ± 0.3 5.30 ± 0.3 0.40 ± 0.1 7.00 0.2 ± 0.05 1 2.54 Pin one ID 0.8 4.40 ± 0.2 1 + 0.2 - 0.7 i178048 PACKAGE MARKING (example of VOM617A-3X001T) 617A3 V YWW 25X Notes • Only option 1 is reflected in the package marking with the characters “X” • Tape and reel suffix (T) is not part of the package marking TAPE AND REEL DIMENSIONS in millimeters 17.1 100 330 (13") Fig. 16 - Reel Dimensions (3000 units per reel) Document Number: 83446 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.4, 24-Sep-2020 VOM617A www.vishay.com 1.5 ± 0.1 Vishay Semiconductors 2 ± 0.1 4 ± 0.1 1.5 ± 0.1 1.75 ± 0.1 2 ± 0.1 4 ± 0.1 5.5 ± 0.1 12 ± 0.3 8 ± 0.1 8 ± 0.1 0.3 ± 0.05 2.45 ± 0.1 Fig. 17 - Tape Dimensions Fig. 18 - Tape Dimensions for 180° Rotation (T2) SOLDER PROFILE HANDLING AND STORAGE CONDITIONS ESD level: HBM class 2 Axis Title 10000 300 Floor life: unlimited Max. 260 °C 255 °C 240 °C 217 °C 250 2nd line Temperature (°C) 5.5 ± 0.1 12 ± 0.3 0.3 ± 0.05 2.45 ± 0.1 1.75 ± 0.1 Conditions: Tamb < 30 °C, RH < 85 % 245 °C Moisture sensitivity level 1, according to J-STD-020 1000 200 1st line 2nd line Max. 30 s 150 Max. 120 s 100 Max. 100 s Max. ramp down 6 °C/s 100 Max. ramp up 3 °C/s 50 10 0 0 50 100 150 200 250 300 Time (s) 19841-1 Fig. 19 - Lead (Pb)-free Reflow Solder Profile According to J-STD-020 Document Number: 83446 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.4, 24-Sep-2020 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000