VOM617A

VOM617A www.vishay.com Vishay Semiconductors Low Input Current, Phototransistor Output, SOP-4, Mini-Flat Package FEATURES A 1 4 C C 2 3 E • Operating temperature from - 55 °C to + 110 °C • SOP-4 mini-flat package • Isolation test voltage, 3750 VRMS • Low saturation voltage • Fast switching times i179089 • Low coupling capacitance • End-stackable, 0.100" (2.54 mm) spacing DESCRIPTION • CTR range 40 % to 600 %, IF = 5 mA The 110 °C rated VOM617A has a GaAs infrared emitting diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a 4 pin 100 mil lead pitch miniflat package. It features a high current transfer ratio, low coupling capacitance, and high isolation voltage. • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • PLCs • Telecommunication These coupling devices are designed for signal transmission between two electrically separated circuits. • Lighting control system • Solar inverters AGENCY APPROVALS • AC drives (All parts are certified under base model VOM617A) • UL1577, file no. E52744 • cUL tested to CSA 22.2 bulletin 5A • DIN EN 60747-5-5 (VDE 0884-5), available with option 1 • FIMKO EN 60065 and EN 60950-1 • CQC GB8898-2011, GB4943.1-2001 ORDERING INFORMATION V O M 6 1 7 A - PART NUMBER SOP-4, mini-flat VDE, UL, cUL, FIMKO, CQC SOP-4, mini-flat X 0 CTR BIN AGENCY CERTIFIED/ PACKAGE UL, cUL, FIMKO, CQC # 0 VDE OPTION 1 T SOP-4 TAPE AND REEL ≥5 CTR (%) 5 mA 50 to 600 63 to 125 100 to 200 160 to 320 250 to 500 80 to 160 130 to 260 200 to 400 VOM617AT VOM617A-2T VOM617A-3T VOM617A-4T VOM617A-6T VOM617A-7T VOM617A-8T VOM617A-9T 50 to 600 63 to 125 100 to 200 160 to 320 250 to 500 80 to 160 130 to 260 200 to 400 VOM617AX001T VOM617A2X001T VOM617A3X001T VOM617A4X001T VOM617A6X001T VOM617A7X001T VOM617A8X001T VOM617A9X001T Document Number: 83446 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.3, 11-Dec-12 VOM617A www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT DC forward current IF 60 mA Reverse voltage VR 6 V Pdiss 70 mW IFSM 2.5 A Collector emitter voltage VCEO 80 V Emitter collector voltage VECO INPUT Power dissipation tp ≤ 10 μs Surge forward current OUTPUT Collector current IC tp ≤ 1 ms Power dissipation 7 V 50 mA 100 mA Pdiss 150 mW VISO 3750 VRMS COUPLER Isolation test voltage between emitter and detector t = 1 min Total power dissipation Ptot 170 mW Operating temperature range Tamb - 55 to + 110 °C Storage temperature range Tstg - 55 to + 150 °C Tj 125 °C Tsld 260 °C Junction temperature Soldering temperature (1) Ptot - Total Power Dissipation (mW) Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) See “Assembly Instructions” for surface mounted devices (www.vishay.com/doc?80054). 200 Coupled device 150 100 Phototransistor IR-diode 50 0 0 25 50 75 100 125 Tamb - Ambient Temperature (°C) Fig. 1 - Total Power Dissipation vs. Ambient Temperature Document Number: 83446 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.3, 11-Dec-12 VOM617A www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER INPUT Forward voltage TEST CONDITION SYMBOL IF = 5 mA Reverse current VR = 6 V VR = 0 V, f = 1 MHz Capacitance OUTPUT Collector emitter leakage current Collector emitter breakdown voltage Emitter collector breakdown voltage Collector emitter capacitance MIN. TYP. MAX. VF 1.1 1.6 V IR 0.01 10 μA Cj 9 VCE = 20 V ICEO IC = 100 μA BVCEO 80 0.3 IE = 10 μA BVECO 7 VCE = 5 V, f = 1 MHz CCE UNIT pF 100 nA V V 2.8 pF COUPLER Coupling capacitance Collector emitter saturation voltage Cut-off frequency f = 1 MHz CIO 0.3 IF = 10 mA, IC = 2.5 mA VCEsat 0.12 IF = 10 mA, VCC = 5 V, RL = 100 Ω fctr 110 pF 0.4 V kHz Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER IC/IF TEST CONDITION IF = 5 mA, VCE = 5 V PART SYMBOL MIN. MAX. UNIT VOM617A CTR 50 TYP. 600 % VOM617A-2 CTR 63 125 % VOM617A-3 CTR 100 200 % VOM617A-4 CTR 160 320 % VOM617A-6 CTR 250 500 % VOM617A-7 CTR 80 160 % VOM617A-8 CTR 130 260 % VOM617A-9 CTR 200 400 % SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT NON-SATURATED Rise and fall time tr 3 μs Fall time tf 3 μs ton 6 μs toff 4 μs Turn-on time IC = 2 mA, VCC = 5 V, RL = 100 Ω Turn-off time SATURATED Rise and fall time Fall time Turn-on time Turn-off time IF = 1.6 mA, VCC = 5 V, RL = 1.9 kΩ tr 7 μs tf 12 μs ton 9 μs toff 15 μs Document Number: 83446 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.3, 11-Dec-12 VOM617A www.vishay.com Vishay Semiconductors VCC = 5 V Input Input pulse RL 10 % VOUT Output pulse 90 % tr t off t on Fig. 2 - Test Circuit tf Fig. 3 - Test Circuit and Waveforms SAFETY AND INSULATION RATINGS PARAMETER SYMBOL VALUE UNIT Output safety power PSO 300 mW Input safety current Isi 200 mW Safety temperature TS 150 °C Comparative tracking index CTI 175 MAXIMUM SAFETY RATINGS INSULATION RATED PARAMETERS Maximum withstanding isolation voltage VISO 3750 VRMS Maximum transient isolation voltage VIOTM 6000 Vpeak Maximum repetitive peak isolation voltage VIORM 565 Vpeak RIO 1012 Ω RIO 1011 Ω Insulation resistance Isolation resistance Tamb = 25 °C, VDC = 500 V Tamb = 100 °C, VDC = 500 V Climatic classification (according to IEC 68 part 1) Environment (pollution degree in accordance to DIN VDE 0109) 55/110/21 2 Internal creepage ≥5 mm External creepage ≥5 mm Clearance ≥5 mm ≥ 0.4 mm Insulation thickness Note • As per DIN EN 60747-5-5 (VDE 0884), § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. Document Number: 83446 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.3, 11-Dec-12 VOM617A www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 14 Tamb = 110 °C Tamb = 75 °C Tamb = 25 °C Tamb = 0 °C Tamb = - 55 °C 10 IC - Collector Current (mA) IF - Forward Current (mA) 100 1 0.6 0.8 1.0 1.2 1.4 8 IF = 5 mA 6 4 IF = 1 mA IF = 2 mA 2 1.6 0 0.1 0.2 0.3 0.4 VCE - Collector Emitter Voltage (sat) (V) Fig. 4 - Forward Voltage vs. Forward Current Fig. 7 - Collector Current vs. Collector Emitter Voltage (sat) IF = 35 mA 50 45 IF = 30 mA 40 35 IF = 25 mA 30 IF = 20 mA 25 20 IF = 15 mA 15 10 IF = 10 mA IF = 1 mA 5 IF = 5 mA 0 0 1 2 3 4 5 6 7 8 9 10 NCTR - Normalized CTR (non-saturated) VF - Forward Voltage (V) 55 IC - Collector Current (mA) 10 0 0.1 1.2 IF = 5 mA 1.0 0.8 0.6 0.4 0.2 0 Fig. 5 - Collector Current vs. Collector Emitter Voltage (NS) Normalized to CTR value: IF = 5 mA, VCE = 5 V, Tamb = 25 °C - 60 - 40 - 20 0 VCE - Collector Emitter Voltage (non-sat) (V) 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 8 - Normalized Current Transfer Ratio (non-sat) vs. Ambient Temperature 1.2 IF = 0 mA 1000 VCE = 40 V 100 10 VCE = 24 V 1 0.1 VCE = 12 V 0.01 NCTR - Normalized CTR (sat) 10 000 ICE0 - Leakage Current (nA) IF = 10 mA 12 IF = 5 mA 1.0 0.8 0.6 0.4 0.2 0 0.001 Normalized to CTR value: IF = 5 mA, VCE = 5 V, Tamb = 25 °C - 60 - 40 - 20 0 - 60 - 40 - 20 0 20 40 60 20 40 60 80 100 120 80 100 120 Tamb - Ambient Temperature (°C) Tamb - Ambient Temperature (°C) Fig. 6 - Leakage Current vs. Ambient Temperature Fig. 9 - Normalized Current Transfer Ratio (sat) vs. Ambient Temperature Document Number: 83446 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.3, 11-Dec-12 VOM617A Vishay Semiconductors 0 0.40 IF = 10 mA 0.35 0.30 Ic = 5 mA Ic = 2 mA 0.15 0.10 Ic = 1 mA 0.05 RL = 100 Ω - 40 0.25 0.20 VCE = 5 V - 20 Phase Angle (deg) VCEsat - Collector Emitter Voltage (V) www.vishay.com RL = 1000 Ω - 60 - 80 - 100 - 120 - 140 - 160 0.00 - 60 - 40 - 20 0 20 40 60 1 80 100 120 10 100 1000 Tamb - Ambient Temperature (°C) f - Cut-off Frequency (kHz) Fig. 10 - Collector Emitter Voltage vs. Ambient Temperature (saturated) Fig. 13 - FCTR vs. Phase Angle 1000 Tamb = 0 °C 1.2 VCC = 5 V Tamb = - 55 °C Tamb = 25 °C 1.0 FCTR (kHz) NCTR - Normalized CTR (NS) 1.4 0.8 0.6 Tamb = 75 °C 0.4 Tamb = 100 °C 10 Normalized to: IF = 5 A, VCE = 5 V, Tamb = 25 °C 0.2 0 1 0.1 1 10 0.1 100 1 10 100 IF - Forward Current (mA) IC (mA) Fig. 11 - Normalized CTR (NS) vs. Forward Current Fig. 14 - FCTR vs. Collector Current 1.2 1.0 0.8 VCE = 0.4 V Normalized to: IF = 5 mA, VCE = 5 V, Tamb = 25 °C 1000 Tamb = 0 °C VCE = 5 V, IF = 2 mA Tamb = - 55 °C 0.6 0.4 Tamb = 25 °C 0.2 Tamb = 75 °C Tamb = 100 °C 0 ton, toff Switching Time (μs) NCTR - Normalized CTR (sat) 100 100 toff (μs) 10 1 ton (μs) 0.1 0.1 1 10 100 0 5 10 15 20 IF - Forward Current (mA) RL - Load Resistance (kΩ) Fig. 12 - Normalized CTR (sat) vs. Forward Current Fig. 15 - Switching Time vs. Load Resistance Document Number: 83446 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.3, 11-Dec-12 VOM617A www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 2.54 ± 0.25 4 3 2 6.5 0.10 ± 0.1 2.00 ± 0.2 3.85 ± 0.3 5.30 ± 0.3 0.40 ± 0.1 7.00 0.2 ± 0.05 1 2.54 Pin one ID 0.8 4.40 ± 0.2 1 + 0.2 - 0.7 i178048 PACKAGE MARKING (example of VOM617A-3X001T) 617A3 V YWW 25X Notes • Only option 1 is reflected in the package marking with the characters “X”. • Tape and reel suffix (T) is not part of the package marking. TAPE AND REEL DIMENSIONS in millimeters 17.1 1.5 ± 0.1 2 ± 0.1 4 ± 0.1 1.75 ± 0.1 5.5 ± 0.1 12 ± 0.3 100 330 (13") 8 ± 0.1 0.3 ± 0.05 2.45 ± 0.1 Fig. 16 - Reel Dimensions (3000 units per reel) Fig. 17 - Tape Dimensions Document Number: 83446 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.3, 11-Dec-12 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VOM617A-1X001T VOM617A-2X001T VOM617A-3X001T VOM617A-4T VOM617A-4X001T VOM617A-5X001T VOM617A-7X001T VOM617A-8X001T VOM617A-9X001T VOM617A-X001T VOM617A-3T VOM617A-1T VOM617A-2T VOM617A-5T VOM617A-7T VOM617A-8T VOM617A-9T VOM617AT