VS-10BQ015-M3
www.vishay.com
Vishay Semiconductors
Schottky Rectifier, 1.0 A
FEATURES
Cathode
• Low forward voltage drop
• Guard ring for enhanced ruggedness and long
term reliability
• 125 °C TJ operation (VR < 5 V)
• Optimized for OR-ing applications
• High frequency operation
• High purity, high temperature epoxy encapsulation for
enhanced mechanical strength and moisture resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Anode
PRODUCT SUMMARY
Package
SMB
IF(AV)
1.0 A
VR
15 V
VF at IF
0.21 V
IRM
35 mA at 100 °C
DESCRIPTION
TJ max.
125 °C
Diode variation
Single die
EAS
1.0 mJ
The VS-10BQ015-M3 surface mount Schottky rectifier has
been designed for applications requiring low forward drop
and very small foot prints on PC boards. The proprietary
barrier technology allows for reliable operation up to 125 °C
junction temperature. Typical applications are in disk drives,
switching power supplies, converters, freewheeling diodes,
battery charging, and reverse battery protection.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
VALUES
UNITS
Rectangular waveform
1.0
A
15
V
IFSM
tp = 5 μs sine
140
A
VF
1.0 Apk, TJ = 125 °C
0.21
V
TJ
Range
- 55 to 125
°C
IF(AV)
CHARACTERISTICS
VRRM
VOLTAGE RATINGS
PARAMETER
Maximum DC reverse voltage
Maximum working peak reverse voltage
SYMBOL
VS-10BQ015-M3
VR
15
VRWM
25
UNITS
V
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
1.0
A
Maximum average forward current
See fig. 5
IF(AV)
Maximum peak one cycle
non-repetitive surge current
See fig. 7
IFSM
Non-repetitive avalanche energy
EAS
TJ = 25 °C, IAS = 1 A, L = 2 mH
1.0
mJ
IAR
Current decaying linearly to zero in 1 μs
Frequency limited by TJ maximum VA = 1.5 x VR typical
1.0
A
Repetitive avalanche current
Revision: 29-May-12
50 % duty cycle at TL = 134 °C, rectangular waveform
5 μs sine or 3 μs rect. pulse
10 ms sine or 6 ms rect. pulse
Following any rated load
condition and with rated
VRRM applied
140
A
40
Document Number: 93349
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-10BQ015-M3
www.vishay.com
Vishay Semiconductors
ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
1A
Maximum forward voltage drop
See fig. 1
VFM (1)
TJ = 25 °C
2A
1A
TJ = 125 °C
2A
Maximum reverse leakage current
See fig. 2
IRM
Threshold voltage
VF(TO)
Forward slope resistance
rt
Typical junction capacitance
CT
Typical series inductance
LS
Maximum voltage rate of change
dV/dt
TJ = 25 °C
VR = Rated VR
TJ = 100 °C
TJ = TJ maximum
VR = 5 VDC, (test signal range 100 kHz to 1 MHz), 25 °C
Measured lead to lead 5 mm from package body
Rated VR
VALUES
UNITS
0.33
0.39
V
0.21
0.29
0.5
mA
35
-
V
-
m
390
pF
2.0
nH
10 000
V/μs
VALUES
UNITS
Note
(1) Pulse width = 300 μs, duty cycle = 2 %
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
Maximum junction temperature range
TJ
(1)
- 55 to 125
Maximum storage temperature range
TStg
- 55 to 150
Maximum thermal resistance,
junction to lead
RthJL (2)
DC operation
See fig. 4
36
Maximum thermal resistance,
junction to ambient
RthJA
DC operation
80
Approximate weight
Marking device
Case style SMB (similar to DO-214AA)
°C
°C/W
0.10
g
0.003
oz.
1C
Notes
(1)
(2)
dP tot
1
------------- < -------------- thermal runaway condition for a diode on its own heatsink
dT J R thJA
Mounted 1" square PCB
Revision: 29-May-12
Document Number: 93349
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-10BQ015-M3
Vishay Semiconductors
10
100
IR - Reverse Current (mA)
IF - Instantaneous Forward Current (A)
www.vishay.com
TJ = 125 °C
1
TJ = 100 °C
TJ = 75 °C
Tj = 25°C
0.1
0.0
100 °C
10
75 °C
50 °C
1
25 °C
0.1
0.01
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0
0.8
3
6
9
12
15
VFM - Forward Voltage Drop (V)
VR - Reverse Voltage (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
Fig. 2 - Typical Peak Reverse Current vs.
Reverse Voltage
CT - Junction Capacitance (pF)
1000
100
10
0
3
6
12
9
15
ZthJC - Thermal Impedance (°C/W)
VR - Reverse Voltage (V)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
100
10
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
PDM
t1
t2
1
Notes:
1. Duty factor D = t1/t2
2. Peak TJ = PDM x ZthJC + TC
Single pulse
(thermal resistance)
0.1
0.00001
0.0001
0.001
0.01
0.1
1
10
100
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)
Revision: 29-May-12
Document Number: 93349
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-10BQ015-M3
Vishay Semiconductors
0.4
110
Average Power Loss (W)
Allowable Case Temperature (°C)
www.vishay.com
100
DC
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
90
80
70
Square wave (D = 0.50)
80 % rated VR applied
60
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
0.3
RMS limit
0.2
DC
0.1
see note (1)
50
0.0
0
0.3
0.6
0.9
1.2
0
1.5
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
IF(AV) - Average Forward Current (A)
Fig. 5 - Maximum Average Forward Current vs.
Allowable Lead Temperature
Fig. 6 - Maximum Average Forward Dissipation vs.
Average Forward Current
IFSM - Non-Repetitive Surge Current (A)
IF(AV) - Average Forward Current (A)
1000
At any rated load condition and
with rated VRRM applied
following surge
100
10
10
100
1000
10 000
tp - Square Wave Pulse Duration (µs)
Fig. 7 - Maximum Non-Repetitive Surge Current
Note
(1) Formula used: T = T - (Pd + Pd
C
J
REV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
Revision: 29-May-12
Document Number: 93349
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-10BQ015-M3
www.vishay.com
Vishay Semiconductors
ORDERING INFORMATION TABLE
Device code
VS-
10
B
Q
015
-M3
1
2
3
4
5
6
1
-
Vishay Semiconductors product
2
-
Current rating
3
-
B = SMB
4
-
Q = Schottky “Q” series
5
-
Voltage rating (015 = 15 V)
6
-
Environmental digit:
-M3 = Halogen-free, RoHS compliant and terminations lead (Pb)-free
ORDERING INFORMATION (Example)
PREFERRED P/N
VS-10BQ015-M3/5BT
PREFERRED PACKAGE CODE
MINIMUM ORDER QUANTITY
PACKAGING DESCRIPTION
5BT
3200
13" diameter plastic tape and reel
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95401
Part marking information
www.vishay.com/doc?95403
Packaging information
www.vishay.com/doc?95404
Revision: 29-May-12
Document Number: 93349
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000