VS-10ETS...-M3 Series
www.vishay.com
Vishay Semiconductors
High Voltage, Input Rectifier Diode, 10 A
FEATURES
Base
cathode
2
2
• Very low forward voltage drop
• 150 °C max. operating junction temperature
• Glass passivated pellet chip junction
• Designed and qualified
JEDEC®-JESD 47
1
1
Cathode
3
3
Anode
according
to
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
2L TO-220AC
APPLICATIONS
• Input rectification
PRIMARY CHARACTERISTICS
IF(AV)
10 A
VR
800 V to 1200 V
VF at IF
1.1 V
IFSM
160 A
TJ max.
150 °C
Package
2L TO-220AC
Circuit configuration
Single
• Vishay Semiconductors switches and output rectifiers
which are available in identical package outlines
DESCRIPTION
High voltage rectifiers optimized for very low forward
voltage drop with moderate leakage.
These devices are intended for use in main rectification
(single or three phase bridge).
OUTPUT CURRENT IN TYPICAL APPLICATIONS
APPLICATIONS
SINGLE-PHASE BRIDGE
THREE-PHASE BRIDGE
UNITS
12.0
16.0
A
Capacitive input filter TA = 55 °C, TJ = 125 °C
common heatsink of 1 °C/W
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
IF(AV)
CHARACTERISTICS
VALUES
UNITS
10
A
Sinusoidal waveform
VRRM
800/1200
V
IFSM
160
A
VF
10 A, TJ = 25 °C
TJ
1.1
V
-40 to +150
°C
VRSM, MAXIMUM NON-REPETITIVE
PEAK REVERSE VOLTAGE
V
IRRM
AT 150 °C
mA
VOLTAGE RATINGS
PART NUMBER
VRRM, MAXIMUM PEAK
REVERSE VOLTAGE
V
VS-10ETS08-M3
800
900
VS-10ETS12-M3
1200
1300
0.5
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Maximum average forward current
IF(AV)
Maximum peak one cycle
non-repetitive surge current
IFSM
Maximum I2t for fusing
I2t
Maximum I2t for fusing
I2t
TEST CONDITIONS
VALUES
TC = 105 °C, 180° conduction half sine wave
10
10 ms sine pulse, rated VRRM applied
135
10 ms sine pulse, no voltage reapplied
160
10 ms sine pulse, rated VRRM applied
91
10 ms sine pulse, no voltage reapplied
130
t = 0.1 ms to 10 ms, no voltage reapplied
1300
UNITS
A
A2s
A2s
Revision: 23-Nov-17
Document Number: 96212
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-10ETS...-M3 Series
www.vishay.com
Vishay Semiconductors
ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum forward voltage drop
VFM
Forward slope resistance
rt
Threshold voltage
VF(TO)
Maximum reverse leakage current
IRM
TEST CONDITIONS
VALUES
UNITS
1.1
V
20
m
0.82
V
10 A, TJ = 25 °C
TJ = 150 °C
TJ = 25 °C
0.05
VR = Rated VRRM
TJ = 150 °C
mA
0.50
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum junction and storage temperature range
TEST CONDITIONS
TJ, TStg
VALUES
UNITS
-40 to +150
°C
Maximum thermal resistance, junction to case
RthJC
Maximum thermal resistance, junction to ambient
(PCB mount)
RthJA
62
TS
240
Soldering temperature
DC operation
2.5
Approximate weight
Marking device
°C/W
°C
2
g
0.07
oz.
10ETS08
Case style 2L TO-220AC
10ETS12
150
150
Maximum Allowable
Case Temperature (°C)
140
Maximum Allowable
Case Temperature (°C)
10ETS.. Series
RthJC (DC) = 2.5 °C/W
130
Ø
Conduction angle
120
110
100
60°
90
90°
180°
30°
10ETS.. Series
RthJC(DC) = 2.5 °C/W
140
130
Ø
Conduction period
120
110
DC
100
120°
30°
120°
80
60°
180°
90°
90
0
2
4
6
8
10
12
0
2
4
6
8
10
12
14
16
Average Forward Current (A)
Average Forward Current (A)
Fig. 1 - Current Rating Characteristics
Fig. 2 - Current Rating Characteristics
18
Revision: 23-Nov-17
Document Number: 96212
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-10ETS...-M3 Series
www.vishay.com
Vishay Semiconductors
180°
120°
90°
60°
30°
14
12
10
RMS limit
8
6
Ø
4
Conduction angle
2
10ETS.. Series
TJ = 150 °C
0
0
2
4
6
8
150
Peak Half Sine Wave Forward Current (A)
Maximum Average
Forward Power Loss (W)
16
10
At any rated load condition and with
rated Vrrm applied following surge.
Initial Tj = 150°C
at 60 Hz 0.0083s
at 50 Hz 0.0100s
140
130
120
110
100
90
80
70
60
50
30
1
Average Forward Current (A)
10
100
Number of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 3 - Forward Power Loss Characteristics
Fig. 5 - Maximum Non-Repetitive Surge Current
180
20
DC
180°
120°
90°
60°
30°
16
14
12
Maximum non-repetitive surge current
versus pulse train duration.
Initial Tj = Tj max.
No voltage reapplied
Rated Vrrm reapplied
160
Peak Half Sine Wave
Forward Current (A)
18
Maximum Average
Forward Power Loss (W)
VS-10ETS.. Series
40
10
8
Ø
6
Conduction period
4
10ETS.. Series
TJ = 150 °C
RMS limit
2
140
120
100
80
60
40
VS-10ETS.. Series
20
0
0
0
2
4
6
8
10
12
14
16
0.01
0.1
1
10
Fig. 4 - Forward Power Loss Characteristics
Fig. 6 - Maximum Non-Repetitive Surge Current
Instantaneous Forward Current (A)
Average Forward Current (A)
Pulse Train Duration (s)
100
TJ = 25 °C
TJ = 150 °C
10
10ETS.. Series
1
0
0.5
1.0
1.5
2.0
2.5
3.0
Instantaneous Forward Voltage (V)
Fig. 7 - Forward Voltage Drop Characteristics
Revision: 23-Nov-17
Document Number: 96212
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-10ETS...-M3 Series
www.vishay.com
Vishay Semiconductors
ZthJC - Transient
Thermal Impedance (°C/W)
10
Steady state value
(DC operation)
1
D = 0.50
D = 0.33
D = 0.25
D = 0.17
D = 0.08
Single pulse
10ETS.. Series
0.1
0.0001
0.001
0.01
0.1
1
10
Square Wave Pulse Duration (s)
Fig. 8 - Thermal Impedance ZthJC Characteristics
ORDERING INFORMATION TABLE
Device code
VS-
10
E
T
S
12
-M3
1
2
3
4
5
6
7
1
-
Vishay Semiconductors product
2
-
Current rating (10 = 10 A)
3
-
Circuit configuration:
E = single
4
-
Package:
T = 2L TO-220AC
5
-
Type of silicon:
S = standard recovery rectifier
6
-
7
-
08 = 800 V
12 = 1200 V
Voltage code x 100 = VRRM
Environmental digit:
-M3 = halogen-free, RoHS-compliant, and terminations lead (Pb)-free
ORDERING INFORMATION (Example)
PREFERRED P/N
QUANTITY PER T/R
MINIMUM ORDER QUANTITY
PACKAGING DESCRIPTION
VS-10ETS08-M3
50
1000
Antistatic plastic tubes
VS-10ETS12-M3
50
1000
Antistatic plastic tubes
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?96156
Part marking information
www.vishay.com/doc?95391
Revision: 23-Nov-17
Document Number: 96212
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
www.vishay.com
Vishay Semiconductors
2L TO-220AC
DIMENSIONS in millimeters and inches
A
0.014 M B A M
(6)
E
A
ØP
Q
B
A
(6)
(E)
A1
Thermal pad
1
(H1)
H1
C
D2
(6) D
2
D
D
L1 (2)
C
(6)
c
2xb
D1
2 x b2
Detail B
Detail B
A2
L
E1 (6)
C
(b, b2)
Base metal
A
c1 (4)
c
2x e
Plating
View A - A
e1
b1, b3
(4)
Section C - C and D - D
0.015 M B A M
Lead tip
Conforms to JEDEC® outline TO-220AC
SYMBOL
A
A1
A2
b
b1
b2
b3
c
c1
D
D1
MILLIMETERS
MIN.
MAX.
4.25
4.65
1.14
1.40
2.50
2.92
0.69
1.01
0.38
0.97
1.20
1.73
1.14
1.73
0.36
0.61
0.36
0.56
14.85
15.35
8.38
9.02
INCHES
MIN.
MAX.
0.167
0.183
0.045
0.055
0.098
0.115
0.027
0.040
0.015
0.038
0.047
0.068
0.045
0.068
0.014
0.024
0.014
0.022
0.585
0.604
0.330
0.355
NOTES
4
4
4
3
SYMBOL
D2
E
E1
e
e1
H1
L
L1
ØP
Q
MILLIMETERS
MIN.
MAX.
11.68
13.30
10.11
10.51
6.86
8.89
2.41
2.67
4.88
5.28
6.09
6.48
13.52
14.02
3.32
3.82
3.54
3.91
2.60
3.00
INCHES
MIN.
MAX.
0.460
0.524
0.398
0.414
0.270
0.350
0.095
0.105
0.192
0.208
0.240
0.255
0.532
0.552
0.131
0.150
0.139
0.154
0.102
0.118
NOTES
6, 7
3, 6
6
6
2
Notes
(1) Dimensioning and tolerancing as per ASME Y14.5M-1994
(2) Lead dimension and finish uncontrolled in L1
(3) Dimension D, D1, and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured
at the outermost extremes of the plastic body
(4) Dimension b1, b3, and c1 apply to base metal only
(5) Controlling dimensions: inches
(6) Thermal pad contour optional within dimensions E, H1, D2, and E1
(7) Outline conforms to JEDEC® TO-220, except D2
Revision: 13-Jun-2019
Document Number: 96156
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2019
1
Document Number: 91000