VS-12F10

VS-12F(R) Series www.vishay.com Vishay Semiconductors Standard Recovery Diodes, (Stud Version), 12 A FEATURES • High surge current capability • Stud cathode and stud anode version • Wide current range • Types up to 1200 V VRRM • Designed and qualified for industrial and consumer level • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DO-4 (DO-203AA) TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS IF(AV) 12 A Package DO-4 (DO-203AA) Circuit configuration Single • Battery charges • Converters • Power supplies • Machine tool controls MAJOR RATINGS AND CHARACTERISTICS PARAMETER TEST CONDITIONS IF(AV) I2t VRRM UNITS 12 A TC 144 °C 19 A 50 Hz 265 60 Hz 280 IF(RMS) IFSM VALUES A 50 Hz 351 60 Hz 320 Range 100 to 1200 V -65 to +175 °C IRRM MAXIMUM AT TJ = 175 °C mA TJ A2s ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VS-12F(R) VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK VOLTAGE V 10 100 150 20 200 275 40 400 500 60 600 725 80 800 950 100 1000 1200 120 1200 1400 12 Revision: 11-Jan-18 Document Number: 93487 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-12F(R) Series www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER SYMBOL Maximum average forward current  at case temperature Maximum RMS forward current IF(AV) TEST CONDITIONS 180° conduction, half sine wave IF(RMS) t = 10 ms Maximum peak, one-cycle forward, non-repetitive surge current VALUES IFSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2t Maximum I2t for fusing I2t t = 8.3 ms t = 10 ms t = 8.3 ms A 144 °C 19 A No voltage reapplied 265 100 % VRRM reapplied 225 280 Sinusoidal half wave, initial TJ = TJ maximum No voltage reapplied A 235 351 320 100 % VRRM reapplied UNITS 12 250 A2s 226 t = 0.1 to 10 ms, no voltage reapplied 3510 Low level value of threshold voltage VF(TO)1 (16.7 % x  x IF(AV) < I <  x IF(AV)), TJ = TJ maximum 0.77 High level value of threshold voltage VF(TO)2 (I >  x IF(AV)), TJ = TJ maximum 0.97 A2s V Low level value of forward  slope resistance rf1 (16.7 % x  x IF(AV) < I <  x IF(AV)), TJ = TJ maximum 10.70 High level value of forward  slope resistance rf2 (I >  x IF(AV)), TJ = TJ maximum 6.20 Ipk = 38 A, TJ = 25 °C, tp = 400 μs rectangular wave 1.26 V VALUES UNITS m Maximum forward voltage drop VFM THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction operating temperature range Maximum storage temperature range TEST CONDITIONS TJ -65 to +175 TStg -65 to +200 Maximum thermal resistance, junction to case RthJC DC operation Maximum thermal resistance, case to heatsink RthCS Mounting surface, smooth, flat and greased 2 Not lubricated threads Allowable mounting torque Lubricated threads Approximate weight Case style See dimensions - link at the end of datasheet 0.5 °C K/W 1.5 + 0 - 10 % N·m 13 lbf · in 1.2 + 0 - 10 % N·m 10 lbf · in 7 g 0.25 oz. DO-4 (DO-203AA) RthJC CONDUCTION CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION 180° 0.33 0.26 120° 0.41 0.44 90° 0.53 0.58 60° 0.78 0.81 30° 1.28 1.29 TEST CONDITIONS UNITS TJ = TJ maximum K/W Note • The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC Revision: 11-Jan-18 Document Number: 93487 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-12F(R) Series www.vishay.com 180 12F(R) Series R thJC (DC) = 2.0 K/W 12F(R) Series R thJC (DC) = 2.0 K/W 170 Conduction Angle 160 150 30° 60° 90° 120° 2 4 6 8 10 160 12 Conduction Period 150 30° 60° 90° 140 120° 180° 180° 140 0 170 Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) 180 Vishay Semiconductors DC 130 0 14 4 8 12 16 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics Maximum Average Forward Power Loss (W) 14 180° 120° 90° 60° 30° 12 10 10 K/W 12 K/W th SA =8 6K /W K/W 15 K /W -D elta R 20 K /W RMS Limit 8 R 20 6 30 K /W Conduction Angle 4 12F(R) Series TJ = 175°C 2 0 0 2 4 6 8 10 12 Average Forward Current (A) 14 25 50 75 100 Maximum Allowable Ambient Temperature (°C) Fig. 3 - Forward Power Loss Characteristics Maximum Average Forward Power Loss (W) 20 Rt DC 180° 120° 90° 60° 30° 16 12 A =6 K/W -D elta R 12 K /W 15 K /W 20 K/W RMS Limit 8 hS 8 K/ W 10 K /W Conduction Period 4 30 K/W 12F(R) Series TJ = 175°C 0 0 4 8 12 16 Average Forward Current (A) 20 25 50 75 100 Maximum Allowable Ambient Temperature (°C) Fig. 4 - Forward Power Loss Characteristics Revision: 11-Jan-18 Document Number: 93487 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-12F(R) Series Instantaneous Forward Current (A) 250 Vishay Semiconductors At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial TJ = 175°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 225 200 175 150 125 12F(R) Series 100 1 10 1000 TJ = 25°C TJ = 175°C 100 10 12F(R) Series 1 0 100 1 2 3 4 5 6 Number Of Equal Amplitude Half Cycle Current Pulses (N) Instantaneous Forward Voltage (V) Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 7 - Forward Voltage Drop Characteristics 275 ZthJC - Transient Thermal Impedance (°C/W) Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) www.vishay.com Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial TJ = 175°C No Voltage Reapplied Rated VRRM Reapplied 250 225 200 175 150 125 12F(R) Series 100 0.01 0.1 1 Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current 10 Steady State Value R thJC = 2.0 K/W (DC Operation) 1 12F(R) Series 0.1 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics ORDERING INFORMATION TABLE Device code VS- 12 F R 120 M 1 2 3 4 5 6 1 - Vishay Semiconductors product 2 - Current rating: code = IF(AV) 3 - F = standard device 4 - None = stud normal polarity (cathode to stud) 5 - Voltage code x 10 = VRRM (see Voltage Ratings table) 6 - None = stud base DO-4 (DO-203AA) 10-32UNF-2A R = stud reverse polarity (anode to stud) M = stud base DO-4 (DO-203AA) M5 x 0.8 LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95311 Revision: 11-Jan-18 Document Number: 93487 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors DO-203AA (DO-4) DIMENSIONS in millimeters (inches) + 0.3 0 + 0.01 (0.08 0) 0.8 ± 0.1 (0.03 ± 0.004) 3.30 (0.13) 4.00 (0.16) 2 5.50 (0.22) MIN. R 0.40 R (0.02) Ø 1.80 ± 0.20 (Ø 0.07 ± 0.01) 20.30 (0.80) MAX. Ø 6.8 (0.27) 10.20 (0.40) MAX. 3.50 (0.14) 11.50 (0.45) 10.70 (0.42) 10/32" UNF-2A For metric devices: M5 x 0.8 11 (0.43) Document Number: 95311 Revision: 30-Jun-08 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000