VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series
www.vishay.com
Vishay Semiconductors
Power Silicon Rectifier Diodes,
(Stud Version), 35 A, 40 A, 60 A
FEATURES
• Low leakage current series
• Good surge current capability up to 1000 A
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
DO-5 (DO-203AB)
PRIMARY CHARACTERISTICS
IF(AV)
35 A, 40 A, 60 A
Package
DO-5 (DO-203AB)
Circuit configuration
Single
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER
IF(AV)
IFSM
I2t
TEST CONDITIONS
TC
1N3765
1N1183A
1N2128A
35 (1)
35 (1)
40 (1)
60 (1)
A
140 (1)
140 (1)
150 (1)
140 (1)
°C
50 Hz
480
380
765
860
60 Hz
500 (1)
400 (1)
800 (1)
900 (1)
50 Hz
1140
730
2900
3700
60 Hz
1040
670
2650
3400
I2√t
VRRM
1N1183
16 100
Range
TJ
50 to 600
10 300
(1)
-65 to +200
700 to 1000
41 000
(1)
-65 to +200
50 to 600
UNITS
A
A2s
A2√s
52 500
(1)
-65 to +200
50 to 600
(1)
V
-65 to +200
°C
Note
(1) JEDEC® registered values
ELECTRICAL SPECIFICATIONS
VOLTAGE RATINGS
TYPE NUMBER
VS-1N1183
VS-1N1184
VS-1N1185
VS-1N1186
VS-1N1187
VS-1N1188
VS-1N1189
VS-1N1190
VS-1N3765
VS-1N3766
VS-1N3767
VS-1N3768
VS-1N1183A
VS-1N1184A
VS-1N1185A
VS-1N1186A
VS-1N1187A
VS-1N1188A
VS-1N1189A
VS-1N1190A
VS-1N2160
VS-1N2128A
VS-1N2129A
VS-1N2130A
VS-1N2131A
VS-1N2133A
VS-1N2135A
VS-1N2137A
VS-1N2138A
VRRM, MAXIMUM REPETITIVE
PEAK REVERSE VOLTAGE
(TJ = -65 °C to +200 °C (2))
V
VRM, MAXIMUM DIRECT
REVERSE VOLTAGE
(TJ = -65 °C to +200 °C (2))
V
50 (1)
100 (1)
150 (1)
200 (1)
300 (1)
400 (1)
500 (1)
600 (1)
700 (1)
800 (1)
900 (1)
1000 (1)
50 (1)
100 (1)
150 (1)
200 (1)
300 (1)
400 (1)
500 (1)
600 (1)
700 (1)
800 (1)
900 (1)
1000 (1)
Notes
• Basic type number indicates cathode to case. For anode to case, add “R” to part number, e.g., 1N1188R, 1N3766R, 1N1186RA, 1N2135RA
(1) JEDEC® registered values
(2) For 1N1183 Series and 1N3765 Series T = -65 °C to +190 °C
C
Revision: 10-Jul-2018
Document Number: 93492
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series
www.vishay.com
Vishay Semiconductors
FORWARD CONDUCTION
PARAMETER
SYMBOL
Maximum average forward current
at case temperature
IF(AV)
TEST CONDITIONS
IFSM
Half cycle 60 Hz
sine wave or 5 ms
rectangular pulse
Half cycle 50 Hz
sine wave or 6 ms
rectangular pulse
140
40 (1)
(1)
150
(1)
60 (1)
140
(1)
480
380
765
860
500 (1)
400 (1)
800 (1)
900 (1)
A
°C
A
Following any
rated load
condition and
with ½ VRRM
applied following
surge = 0
910
1000
595
475
950
1050
1140
730
2900
3700
1040
670
2650
3400
1610
1030
4150
5250
1470
940
3750
4750
16 100
10 300
41 500
52 500
1.7 (1)
1.8 (1)
1.3 (1)
1.3 (1)
V
110
110
126
188
A
VRRM = 700
-
5.0 (1)
-
-
VRRM = 800
-
4.0 (1)
-
-
-
3.0 (1)
-
-
-
2.0 (1)
-
-
10 (1)
-
2.5 (1)
10 (1)
for fusing
t = 8.3 ms
I2t
t = 10 ms
Maximum I2t for individual
device fusing
t = 8.3 ms
Maximum I2√t for individual
device fusing
I2√t (2)
Maximum peak forward voltage
at maximum forward current (IFM)
Maximum average
reverse current
Following any
rated load
condition and
with rated
VRRM applied
35 (1)
455
t = 10 ms
Maximum
140
(1)
1N3765 1N1183A 1N2128A UNITS
570
Half cycle 60 Hz
sine wave or 5 ms
rectangular pulse
I2t
35 (1)
1-phase operation,
180° sinusoidal conduction
Half cycle 50 Hz
sine wave or 6 ms
rectangular pulse
Maximum peak one cycle
non-repetitive surge current
1N1183
VFM
IR(AV)
VRRM = 900
With rated VRRM
applied following
surge, initial
TJ = TJ maximum
With VRRM = 0
following surge,
initial
TJ = TJ maximum
t = 0.1 to 10 ms,
VRRM = 0 following surge
TJ = 25 °C
Maximum rated IF(AV) and TC
VRRM = 1000
Maximum rated IF(AV), VRRM and TC
A2s
A2√s
mA
Notes
(1) JEDEC® registered values
(2) I2t for time t = I2√t x √t
x
x
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
Maximum operating
case temperature range
SYMBOL
TEST CONDITIONS
1N1183 1N3765 1N1183A 1N2128A UNITS
TC
-65 to +190 (1)
-65 to +200
Maximum storage
temperature range
TStg
-65 to +175 (1)
-65 to +200
Maximum internal thermal
resistance, junction to case
RthJC
DC operation
Thermal resistance,
case to sink
RthCS
Mounting surface, smooth, flat and greased
°C
1.00 (1)
Not lubricated thread, tighting on hexagon
Approximate weight
JEDEC®
0.25
3.4 (30)
Lubricated thread, tighting on nut (2)
Lubricated thread, tighting on hexagon (3)
Case style
0.65 (1)
°C/W
Not lubricated thread, tighting on nut (2)
Maximum allowable
mounting torque
(+ 0 %, - 10 %)
1.1 (1)
2.3 (20)
(3)
4.2 (37)
N·m
(lbf · in)
3.2 (28)
17
g
0.6
oz.
DO-5 (DO-203AB)
Notes
(1) JEDEC registered values®
(2) Recommended for pass-through holes
(3) Recommended for holed threaded heatsinks
Revision: 10-Jul-2018
Document Number: 93492
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series
Vishay Semiconductors
190
180
Ø
170
Conduction Period
160
150
DC
140
+60 °C +120 °C
+180 °C
130
120
110
100
0
10
20
30
50
40
60
IF - Instantaneous Forward Current (A)
Maximum Allowable Case Temperature (°C)
www.vishay.com
TJ = 190 °C
101
TJ = 25 °C
1
0
1
2
3
4
5
6
IF - Instantaneous Forward Voltage (V)
Fig. 1 - Maximum Allowable Case Temperature vs.
Average Forward Current, 1N1183 and 1N3765 Series
Fig. 4 - Typical Forward Voltage vs. Forward Current,
1N1183 and 1N3765 Series
60
50
+180 °C
40
DC
30
20
Ø
10
Peak Half Sine Wave
Forward Current (Per Unit)
1.0
+60 °C +120 °C
TJ = 190 °C
At any rated load condition and with
rated VRRM applied following surge
Series
Per Unit Base-A
1N1183
500
1N3765
400
0.9
0.8
0.7
0.6
50 Hz
60 Hz
0.5
0.4
Conduction Period
0
0.3
0
10
20
30
40
50
1
20
40 60
90
Average Forward Current
Over Full Cycle (A)
+180 °C
+120 °C
+60 °C
103
102
Conduction Period
10
102
103
80
70
104
Average Forward Power Loss
Over Full Cycle (W)
Fig. 3 - Typical High Level Forward Power Loss vs.
Average Forward Current (Sinusoidal Current Waveform),
1N1183 and 1N3765 Series
DC
+180 °C
Wave
+120 °C
&
60
50
+180 °C
Wave
Wave
40
30
20
10
Ø
10
6 8 10
100
TJ = 140 °C
DC
104
4
Fig. 5 - Maximum Non-Repetitive Surge Current vs.
Number of Current Pulses, 1N1183 and 1N3765 Series
Fig. 2 - Typical Low Level Forward Power Loss vs.
Average Forward Current (Sinusoidal Current Waveform),
1N1183 and 1N3765 Series
105
2
Number of Equal Amplitude
Current Pulses (N)
Average Forward Current Over Full Cycle (A)
Average Forward Current
Over Full Cycle (A)
Typical
102
Average Forward Current Over Full Cycle (A)
70
Average Forward Power Loss
Over Full Cycle (W)
103
+60 °C
&
Wave
+Conduction Period
0
110 120 130 140 150 160 170 180 190 200
Maximum Allowable CaseTemperature (°C)
Fig. 6 - Average Forward Current vs. Maximum Allowable Case
Temperature, 1N1183A Series
Revision: 10-Jul-2018
Document Number: 93492
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series
www.vishay.com
Vishay Semiconductors
1.0
+180 °C
Wave
+180 °C
Wave
90
80
+120 °C
70
+60 °C
&
&
DC
Maximum Peak Half Sine Wave
Forward Current (Per Unit)
Average Forward Power Loss
Over Full Cycle (W)
100
Wave
Wave
60
50
40
TJ = 200 °C
30
20
+Conduction Period
10
0
10
20
30
40
50
60
0.7
0.6
60 Hz
0.5
50 Hz
0.4
70
1
2
4
6 8 10
20
40 60
Number of Equal Amplitude
Current Pulses (N)
Fig. 10 - Maximum Non-Repetitive Surge Current vs.
Number of Current Pulses, 1N1183A Series
Average Forward Current Over Full Cycle (A)
Fig. 7 - Maximum Low Level Forward Power Loss vs.
Average Forward Current, 1N1183A Series
1.0
104
+180 °C
Wave
+180 °C
Wave
+120 °C
103
+60 °C
&
&
DC
Maximum Peak Half Sine Wave
Forward Current (Per Unit)
Average Forward Power Loss
Over Full Cycle (W)
0.8
0.3
0
Wave
Wave
102
TJ = 200 °C
+Conduction Period
At any rated load condition and with
rated VRRM applied following surge
Series
Per Unit Base-A
1N2128A
900
0.9
0.8
0.7
0.6
60 Hz
0.5
0.4
50 Hz
0.3
1
10
102
10
103
1
Average Forward Current Over Full Cycle (A)
103
2
10
TJ = 25 °C
10
TJ = 200 °C
1
10-1
0
0.5
1
1.5
2
2.5
3
3.5
Instantaneous Forward Voltage (V)
Fig. 9 - Maximum Forward Voltage vs. Forward Current,
1N1183A Series
Maximum Allowable Case Temperature (°C)
104
2
4
6 8 10
20
40 60
Number of Equal Amplitude
Current Pulses (N)
Fig. 11 - Maximum Non-Repetitive Surge Current vs.
Number of Current Pulses, 1N2128A Series
Fig. 8 - Maximum High Level Forward Power Loss vs.
Average Forward Current, 1N1183A Series
Instantaneous Forward Current (A)
At any rated load condition and with
rated VRRM applied following surge
Series
Per Unit Base-A
1N1183A
800
0.9
200
+60 °C
&
+120 °C
&
+180 °C
+180 °C
180
Wave
Wave
Wave
Wave
160
140
DC
120
100
+Conduction Period
80
60
0
10
20
30
40
50
60
70
80
90 100
Average Forward Current Over Full Cycle (A)
Fig. 12 - Maximum Allowable Case Temperature vs.
Average Forward Current, 1N2128A Series
Revision: 10-Jul-2018
Document Number: 93492
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series
www.vishay.com
Vishay Semiconductors
103 +60 °C
60
50
40
30
TJ = 140 °C
+60 °C
&
+120 °C
&
+180 °C
+180 °C
Wave
Wave
Wave
Wave
+Conduction Period
20
&
+90 °C
&
+180 °C
+180 °C
Average Forward Power Loss
Over Full Cycle (W)
Average Forward Power Loss
Over Full Cycle (W)
70
DC
10
TJ = 140 °C
+Conduction
Period
102
+180 °C
+180 °C
+120 °C
&
+60 °C
&
10
10
20
30
40
104
DC
DC
0
0
105
Wave
Wave
Wave
Wave
50
102
10
103
Wave
Wave
Wave
Wave
104
103
Average Forward Current Over Full Cycle (A)
Fig. 13 - Maximum Low Level Forward Power Loss vs.
Average Forward Current, 1N2128A Series
Fig. 14 - Maximum High Level Forward Power Loss vs.
Average Forward Current, 1N2128A Series
Instantaneous Forward Current (A)
Average Forward Current Over Full Cycle (A)
104
103
102
TJ = 140 °C
101
TTJJ == 25 °C
°C
1.0
0
1
2
3
4
5
6
7
Instantaneous Forward Voltage (V)
Fig. 15 - Maximum Forward Voltage vs. Forward Current,
1N2128A Series
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95360
Revision: 10-Jul-2018
Document Number: 93492
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
www.vishay.com
Vishay Semiconductors
DO-203AB (DO-5) for
1N1183, 1N3765, 1N1183A, 1N2128A, 1N3208 Series
DIMENSIONS in millimeters (inches)
Ø 14.6 (0.57)
6.1 (0.24)
7.0 (0.28)
Ø 4.10 (0.16)
Ø 3.80 (0.15)
1.03 (0.04)
MAX.
4 (0.16) MIN.
25.4 (1.0) MAX.
10.8 (0.43)
11.4 (0.45)
10.7 (0.42)
11.5 (0.45)
1/4" 28UNF-2A
1.0 (0.04)
MAX.
17.40 (0.68) MIN.
Across flats
Revision: 19-Nov-2020
Document Number: 95360
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000