VS-25ETS08S-M3, VS-25ETS10S-M3, VS-25ETS12S-M3 Series
www.vishay.com
Vishay Semiconductors
High Voltage Surface Mount Input Rectifier Diode, 25 A
FEATURES
Base
cathode
2
• Glass passivated pellet chip junction
• Meets MSL level 1, per J-STD-020,
LF maximum peak of 245 °C
• Designed and qualified
JEDEC®-JESD 47
2
1
1
Anode
3
according
to
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
3
Anode
D2PAK (TO-263AB)
APPLICATIONS
• Input rectification
PRIMARY CHARACTERISTICS
IF(AV)
25 A
VR
800 V, 1000 V, 1200 V
VF at IF
1.14 V
IFSM
300 A
Tj max.
150 °C
Package
D2PAK (TO-263AB)
Circuit configuration
Single
• Vishay switches and output rectifiers which are available
in identical package outlines
DESCRIPTION
The VS-25ETS..S-M3 rectifier High Voltage Series has been
optimized for very low forward voltage drop, with moderate
leakage. The glass passivation technology used has reliable
operation up to 150 °C junction temperature.
OUTPUT CURRENT IN TYPICAL APPLICATIONS
APPLICATIONS
SINGLE-PHASE BRIDGE
THREE-PHASE BRIDGE
UNITS
20
23
A
Capacitive input filter TA = 55 °C, TJ = 125 °C
common heatsink of 1 °C/W
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
IF(AV)
CHARACTERISTICS
Sinusoidal waveform
VALUES
UNITS
25
A
VRRM
800 to 1200
V
IFSM
300
A
VF
10 A, TJ = 25 °C
TJ
1.0
V
-40 to +150
°C
VRSM, MAXIMUM NON-REPETITIVE
PEAK REVERSE VOLTAGE
V
IRRM AT 150 °C
mA
VOLTAGE RATINGS
PART NUMBER
VRRM, MAXIMUM PEAK
REVERSE VOLTAGE
V
VS-25ETS08S-M3
800
900
VS-25ETS10S-M3
1000
1100
VS-25ETS12S-M3
1200
1300
1
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Maximum average forward current
IF(AV)
Maximum peak one cycle
non-repetitive surge current
IFSM
Maximum I2t for fusing
I2t
Maximum I2√t for fusing
I2√t
TEST CONDITIONS
TC = 106 °C, 180° conduction half sine wave
VALUES
UNITS
25
10 ms sine pulse, rated VRRM applied
250
10 ms sine pulse, no voltage reapplied
300
10 ms sine pulse, rated VRRM applied
316
10 ms sine pulse, no voltage reapplied
442
t = 0.1 ms to 10 ms, no voltage reapplied
4420
A
A2s
A2√s
Revision: 16-Dec-2021
Document Number: 94890
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-25ETS08S-M3, VS-25ETS10S-M3, VS-25ETS12S-M3 Series
www.vishay.com
Vishay Semiconductors
ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum forward voltage drop
VFM
Forward slope resistance
rt
Threshold voltage
VF(TO)
Maximum reverse leakage current
TEST CONDITIONS
VALUES
25 A, TJ = 25 °C
TJ = 150 °C
TJ = 25 °C
IRM
V
9.62
mΩ
0.87
V
0.1
VR = Rated VRRM
TJ = 150 °C
UNITS
1.14
mA
1.0
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum junction and storage
temperature range
TEST CONDITIONS
TJ, TStg
Maximum thermal resistance,
junction to case
RthJC
Maximum thermal resistance,
junction to ambient
RthJA
Typical thermal resistance,
case to heatsink
RthCS
VALUES
UNITS
-40 to +150
°C
DC operation
0.9
Mounting surface, smooth, and greased
0.5
2
g
0.07
oz.
minimum
6 (5)
maximum
12 (10)
kgf · cm
(lbf · in)
Approximate weight
Mounting torque
°C/W
62
25ETS08S
Case style D2PAK (TO-263AB)
Marking device
25ETS10S
25ETS12S
150
150
RthJC (DC) = 0.9 K/W
140
Maximum Allowable Case
Temperature (°C)
Maximum Allowable Case
Temperature (°C)
RthJC (DC) = 0.9 K/W
Ø
130
Conduction angle
120
110
100
90
30°
60°
10
15
90°
120°
180°
80
140
Ø
130
Conduction period
120
DC
110
90°
30°
100
60°
120°
180°
90
0
5
20
25
Average Forward Current (A)
Fig. 1 - Current Rating Characteristics
30
0
5
10
15
20
25
30
35
40
Average Forward Current (A)
Fig. 2 - Current Rating Characteristics
Revision: 16-Dec-2021
Document Number: 94890
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-25ETS08S-M3, VS-25ETS10S-M3, VS-25ETS12S-M3 Series
www.vishay.com
Vishay Semiconductors
300
180°
120°
90°
60°
30°
35
30
Peak Half Sine Wave
Forward Current (A)
Maximum Average Forward
Power Loss (W)
40
25
RMS limit
20
15
10
Ø
Conduction angle
At any rated load condition and with
rated VRRM applied following surge.
Initial TJ = 150 °C
at 60 Hz 0.0083 s
at 50 Hz 0.0100 s
200
100
5
TJ = 150 °C
0
0
0
5
10
15
20
25
1
30
100
Average Forward Current (A)
Number of Equal Amplitude Half
Cycle Current Pulses (N)
Fig. 3 - Forward Power Loss Characteristics
Fig. 5 - Maximum Non-Repetitive Surge Current
60
300
DC
180°
120°
90°
60°
30°
50
40
Peak Half Sine Wave
Forward Current (A)
Maximum Average Forward
Power Loss (W)
10
RMS limit
30
20
Ø
Maximum non-repetitive surge current
versus pulse train duration.
Initial TJ = 150 °C
No voltage reapplied
Rated VRRM reapplied
200
100
Conduction period
10
TJ = 150 °C
0
0.01
0
0
10
20
30
40
0.1
1
10
Pulse Train Duration (s)
Fig. 4 - Forward Power Loss Characteristics
Fig. 6 - Maximum Non-Repetitive Surge Current
Instantaneous Forward Current (A)
Average Forward Current (A)
1000
TJ = 25 °C
100
TJ = 150 °C
10
1
0
1
2
3
4
5
Instantaneous Forward Voltage (V)
Fig. 7 - Forward Voltage Drop Characteristics
Revision: 16-Dec-2021
Document Number: 94890
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-25ETS08S-M3, VS-25ETS10S-M3, VS-25ETS12S-M3 Series
www.vishay.com
Vishay Semiconductors
ZthJC - Transient Thermal
Impedance (°C/W)
1
Steady state value
(DC operation)
D = 0.50
D = 0.33
D = 0.25
D = 0.17
D = 0.08
0.1
Single pulse
0.01
0.0001
0.001
0.01
0.1
1
10
100
Square Wave Pulse Duration (s)
Fig. 8 - Thermal Impedance ZthJC Characteristics
ORDERING INFORMATION TABLE
Device code
VS-
25
E
T
S
12
S
1
2
3
4
5
6
7
1
-
Vishay Semiconductors product
2
-
Current rating (25 = 25 A)
3
-
Circuit configuration
4
-
Package:
TRL -M3
8
9
E = single
T = D2PAK (TO-263AB)
5
-
Type of silicon:
S = standard recovery rectifier
6
-
Voltage code x 100 = VRRM
7
-
S = surface mountable
8
-
08 = 800 V
10 = 1000 V
12 = 1200 V
None = tube
TRL = tape and reel (left oriented)
TRR = tape and reel (right oriented)
9
-
-M3 = halogen-free, RoHS-compliant, and terminations lead (Pb)-free
Revision: 16-Dec-2021
Document Number: 94890
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-25ETS08S-M3, VS-25ETS10S-M3, VS-25ETS12S-M3 Series
www.vishay.com
Vishay Semiconductors
ORDERING INFORMATION (Example)
PREFERRED P/N
BASE QUANTITY
PACKAGING DESCRIPTION
VS-25ETS08S-M3
50
Antistatic plastic tube
VS-25ETS08STRR-M3
800
13" diameter reel
VS-25ETS08STRL-M3
800
13" diameter reel
VS-25ETS10S-M3
50
Antistatic plastic tube
VS-25ETS10STRR-M3
800
13" diameter reel
VS-25ETS10STRL-M3
800
13" diameter reel
VS-25ETS12S-M3
50
Antistatic plastic tube
VS-25ETS12STRR-M3
800
13" diameter reel
VS-25ETS12STRL-M3
800
13" diameter reel
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?96164
Part marking information
www.vishay.com/doc?95444
Packaging information
www.vishay.com/doc?96424
Revision: 16-Dec-2021
Document Number: 94890
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
www.vishay.com
Vishay Semiconductors
D2PAK
DIMENSIONS in millimeters and inches
Conforms to JEDEC® outline D2 PAK (SMD-220)
(2)(3)
E
B
Pad layout
A
A
(E)
c2
11.00
MIN.
(0.43)
A
(3) L1
4
9.65
MIN.
(0.38)
(D1) (3)
Detail A
D
H
1
2
17.90 (0.70)
15.00 (0.625)
(2)
3
3.81
MIN.
(0.15)
L2
B
B
2.32
MIN.
(0.08)
A
2 x b2
C
2xb
2.64 (0.103)
2.41 (0.096)
(3)
E1
c
View A - A
± 0.004 M B
0.010 M A M B
2x e
Plating
Base
Metal
(4)
b1, b3
H
Gauge
plane
L
Seating
plane
L3
A1
Lead tip
(b, b2)
L4
Section B - B and C - C
Scale: None
Detail “A”
Rotated 90 °CW
Scale: 8:1
SYMBOL
MILLIMETERS
MIN.
MAX.
INCHES
MIN.
c1 (4)
(c)
B
0° to 8°
MAX.
NOTES
SYMBOL
MILLIMETERS
MIN.
MAX.
INCHES
MIN.
MAX.
NOTES
A
4.06
4.83
0.160
0.190
D1
6.86
8.00
0.270
0.315
3
A1
0.00
0.254
0.000
0.010
E
9.65
10.67
0.380
0.420
2, 3
E1
7.90
8.80
0.311
0.346
3
b
0.51
0.99
0.020
0.039
b1
0.51
0.89
0.020
0.035
b2
1.14
1.78
0.045
0.070
b3
1.14
1.73
0.045
0.068
c
0.38
0.74
0.015
0.029
c1
0.38
0.58
0.015
0.023
c2
1.14
1.65
0.045
0.065
D
8.51
9.65
0.335
0.380
4
4
e
2.54 BSC
0.100 BSC
H
14.61
15.88
0.575
0.625
0.110
L
1.78
2.79
0.070
L1
-
1.65
-
0.066
4
L2
1.27
1.78
0.050
0.070
2
L4
L3
0.25 BSC
4.78
5.28
3
0.010 BSC
0.188
0.208
Notes
(1) Dimensioning and tolerancing per ASME Y14.5 M-1994
(2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at
the outmost extremes of the plastic body
(3) Thermal pad contour optional within dimension E, L1, D1 and E1
(4) Dimension b1 and c1 apply to base metal only
(5) Datum A and B to be determined at datum plane H
(6) Controlling dimension: inches
(7) Outline conforms to JEDEC® outline TO-263AB
Revision: 13-Jul-17
Document Number: 96164
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000