VS-26MT.., VS-36MT.. Series
www.vishay.com
Vishay Semiconductors
Three Phase Bridge Rectifier, 25 A, 35 A
FEATURES
• Universal, 3 way terminals: push-on, wrap
around or solder
• High thermal conductivity package, electrically
insulated case
• Center hole fixing
• Excellent power/volume ratio
• UL E300359 approved
• Nickel plated terminals solderable using lead (Pb)-free
solder; solder alloy Sn/Ag/Cu (SAC305); solder
temperature 260 °C to 275 °C
D-63
• Designed and qualified for industrial and consumer level
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
IO
25 A, 35 A
VRRM
50 V to 1600 V
Package
D-63
Circuit configuration
Three phase bridge
DESCRIPTION
A range of extremely compact, encapsulated three phase
bridge rectifiers offering efficient and reliable operation.
They are intended for use in general purpose and
instrumentation applications.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
IO
IFSM
I2t
CHARACTERISTICS
TC
VALUES
26MT..
VALUES
36MT..
25
35
A
70
60
°C
50 Hz
360
475
60 Hz
375
500
50 Hz
635
1130
60 Hz
580
1030
UNITS
A
A2s
VRRM
50 to 1600
V
TJ
-55 to +150
°C
ELECTRICAL SPECIFICATIONS
VOLTAGE RATINGS
TYPE NUMBER
VS-26MT..
VS-36MT..
VOLTAGE
CODE
VRRM, MAXIMUM REPETITIVE
PEAK REVERSE VOLTAGE
V
VRSM, MAXIMUM NON-REPETITIVE
PEAK REVERSE VOLTAGE
V
05
50
75
10
100
150
20
200
275
40
400
500
60
600
725
80
800
900
100
1000
1100
120
1200
1300
140
1400
1500
160
1600
1700
IRRM MAXIMUM
AT TJ MAXIMUM
mA
2
Revision: 15-Jan-2019
Document Number: 93565
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-26MT.., VS-36MT.. Series
www.vishay.com
Vishay Semiconductors
FORWARD CONDUCTION
PARAMETER
SYMBOL
Maximum DC output current at TC
IO
120° rect. conduction angle
t = 10 ms
Maximum peak, one-cycle
non-repetitive forward current
t = 8.3 ms
IFSM
t = 10 ms
t = 8.3 ms
t = 10 ms
Maximum I2t for fusing
I2t
Maximum I2t for fusing
I2t
VALUES
26MT..
TEST CONDITIONS
t = 8.3 ms
t = 10 ms
t = 8.3 ms
No voltage
reapplied
100 % VRRM
reapplied
No voltage
reapplied
Initial
TJ = TJ maximum
100 % VRRM
reapplied
VALUES
36MT..
UNITS
25
35
A
70
60
°C
360
475
375
500
300
400
314
420
635
1130
580
1030
450
800
410
730
I2t for time tx = I2t x tx; 0.1 tx 10 ms, VRRM = 0 V
6360
11 300
Low level of threshold voltage
VF(TO)1
(16.7 % x x IF(AV) < I < x IF(AV)), TJ maximum
0.88
0.86
High level of threshold voltage
VF(TO)2
(I > x IF(AV)), TJ maximum
1.13
1.03
Low level forward slope resistance
rt1
(16.7 % x x IF(AV) < I < x IF(AV)), TJ maximum
7.9
6.3
High level forward slope resistance
rt2
(I > x IF(AV)), TJ maximum
5.2
5.0
1.26
A
A2s
A2s
V
m
Maximum forward voltage drop
VFM
TJ = 25 °C, IFM = 40 Apk - per single junction
Maximum DC reverse current
IRRM
TJ = 25 °C, per junction at rated VRRM
100
µA
RMS isolation voltage
VINS
TJ = 25 °C, all terminal shorted; f = 50 Hz, t = 1 s
2700
V
1.19
V
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum junction and storage
temperature range
VALUES
26MT
TEST CONDITIONS
TJ, TStg
VALUES
36MT
-55 to +150
Maximum thermal resistance,
junction to case
RthJC
DC operation per bridge
(based on total power loss of bridge)
1.42
1.35
Maximum thermal resistance,
case to heatsink
RthCS
Mounting surface, smooth, flat and greased
0.2
0.2
Bridge to heatsink with screw M4
Instantaneous Forward Current (A)
160
Maximum Allowable
Case Temperature (°C)
26MT.. Series
140
120
100
+
120° (rect.)
~
80
-
60
0
5
10
15
20
25
Total Output Current (A)
Fig. 1 - Current Ratings Characteristics
30
°C
K/W
Approximate weight
Mounting torque ± 10 %
UNITS
20
g
2.0
Nm
1000
26MT.. Series
100
Per junction
10
TJ = 25 °C
TJ = 150 °C
1
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Instantaneous Forward Voltage (V)
Fig. 2 - Forward Voltage Drop Characteristics
Revision: 15-Jan-2019
Document Number: 93565
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-26MT.., VS-36MT.. Series
www.vishay.com
Vishay Semiconductors
55
50
45
20
15
10
5
15
10
10 K/W
30
25
20
R
-Δ
25
2K
/W
3K
/W
4K
/W
5K
/W
7 K/
W
35
W
30
40
K/
120° (rect.)
K/
W
7
0.
35
1
45
=
40
50
SA
Maximum Total Power Loss (W)
26MT.. Series
TJ = 150 °C
R th
Maximum Total Power Loss (W)
55
5
0
0
0
5
10
20
0
25
Total Output Current (A)
25
50
75
100
125
150
Maximum Allowable Ambient Temperature (°C)
Fig. 3 - Total Power Loss Characteristics
320
150
At any rated load condition and with
rated VRRM applied following surge.
Initial TJ = 150 °C
at 60 Hz 0.0083 s
at 50 Hz 0.0100 s
Peak Half Sine Wave
Forward Current (A)
280
260
240
36MT.. Series
Maximum Allowable
Case Temperature (°C)
300
220
200
180
160
140
120
130
110
90
120° (rect.)
+
~
70
-
100
26MT.. Series
80
50
1
10
0
100
5
400
Maximum non-repetitive surge current
versus pulse train duration.
Initial TJ = 150 °C
No voltage reapplied
Rated VRRM reapplied
Peak Half Sine Wave
Forward Current (A)
280
240
200
160
120
26MT.. Series
80
0.01
0.1
20
25
30
35
40
1
Pulse Drain Duration (s)
Fig. 5 - Maximum Non-Repetitive Surge Current
Fig. 6 - Current Ratings Characteristics
Instantaneous Forward Current (A)
Fig. 4 - Maximum Non-Repetitive Surge Current
320
15
Total Output Current (A)
Number of Equal Amplitude Half Cycle
Current Pulses (N)
360
10
1000
36MT.. Series
100
Per junction
10
TJ = 25 °C
TJ = 150 °C
1
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Instantaneous Forward Voltage (V)
Fig. 7 - Forward Voltage Drop Characteristics
Revision: 15-Jan-2019
Document Number: 93565
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-26MT.., VS-36MT.. Series
www.vishay.com
Vishay Semiconductors
80
Maximum Total Power Loss (W)
Maximum Total Power Loss (W)
80
36MT.. Series
TJ = 150 °C
70
60
50
120° (rect.)
40
30
20
10
70
R
th
SA
60
1K
50
0.
7
/W
K/
W
2K
40
-Δ
R
/W
3K
/W
4 K/
W
5 K/W
7 K/W
30
20
10 K/W
10
0
=
0
0
5
10
15
20
25
35
30
0
Total Output Current (A)
25
50
75
100
125
150
Maximum Allowable Ambient Temperature (°C)
Fig. 8 - Total Power Loss Characteristics
500
450
At any rated load condition and with
rated VRRM applied following surge.
Initial TJ = 150 °C
at 60 Hz 0.0083 s
at 50 Hz 0.0100 s
350
Maximum non-repetitive surge current
versus pulse train duration.
Initial TJ = 150 °C
No voltage reapplied
Rated VRRM reapplied
450
Peak Half Sine Wave
Forward Current (A)
Peak Half Sine Wave
Forward Current (A)
400
300
250
200
400
350
300
250
200
150
150
36MT.. Series
36MT.. Series
100
0.01
100
1
10
100
0.1
1
Pulse Drain Duration (s)
Number of Equal Amplitude Half Cycle
Current Pulses (N)
Fig. 10 - Maximum Non-Repetitive Surge Current
Fig. 9 - Maximum Non-Repetitive Surge Current
ZthJC - Transient Thermal
Impedance (K/W)
10
1
Steady state value:
RthJC = 1.42 K/W
(DC operation)
0.1
26MT.. Series
per bridge
0.01
.
0.001
0.001
.
0.01
0.1
1
10
100
Square Wave Pulse Duration (s)
Fig. 11 - Thermal Impedance ZthJC Characteristics
Revision: 15-Jan-2019
Document Number: 93565
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-26MT.., VS-36MT.. Series
www.vishay.com
Vishay Semiconductors
ZthJC - Transient Thermal
Impedance (K/W)
10
Steady state value:
RthJC = 1.35 K/W
(DC operation)
1
0.1
36MT.. Series
per bridge
0.01
.
.
0.001
0.001
0.01
0.1
1
10
100
Square Wave Pulse Duration (s)
Fig. 12 - Thermal Impedance ZthJC Characteristics
ORDERING INFORMATION TABLE
Device code
VS-
36
MT
160
1
2
3
4
1
-
Vishay Semiconductors product
2
-
Current rating code
3
-
Basic part number
4
-
Voltage code x 10 = VRRM
26 = 25 A (average)
36 = 35 A (average)
CIRCUIT CONFIGURATION
+
~
-
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95251
Revision: 15-Jan-2019
Document Number: 93565
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
www.vishay.com
Vishay Semiconductors
D-63
DIMENSIONS in millimeters (inches)
6.35 ± 0.05 (0.25 ± 0.002)
22 ± 1 (0.87 ± 0.004)
10 ± 0.3
(0.39 ± 0.01)
0.8 ± 0.1
(0.03 ± 0.0039)
24 ± 0.5 (0.950 ± 0.02)
28.5 ± 0.15 (1.12 ± 0.006)
AC2
16.0 ± 0.3
(0.63 ± 0.012)
24 ± 0.5 (0.950 ± 0.02)
AC3
Ø5
.2 (
AC1
12.25 (0.482)
max.
0.2
0)
+
Not to scale
Revision: 09-Feb-15
Document Number: 95251
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023
1
Document Number: 91000
工商网监
湘ICP备2023018690号
