VS-40EPS08-M3

VS-40EPS..-M3 Series www.vishay.com Vishay Semiconductors High Voltage, Input Rectifier Diode, 40 A FEATURES Base cathode • Very low forward voltage drop • 150 °C max. operating junction temperature 2 • Glass passivated pellet chip junction 1 • Designed and qualified JEDEC®-JESD 47 3 TO-247AC 2L 1 Cathode 3 Anode according to Available • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Input rectification • Vishay Semiconductors switches and output rectifiers which are available in identical package outlines PRIMARY CHARACTERISTICS IF(AV) 40 A VR 800 V to 1200 V VF at IF 1.1 V DESCRIPTION IFSM 475 A High voltage rectifiers optimized for very low forward voltage drop with moderate leakage. TJ max. 150 °C Package TO-247AC 2L Circuit configuration Single These devices are intended for use in main rectification (single or three phase bridge). MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS IF(AV) Sinusoidal waveform VRRM Range IFSM VF 40 A, TJ = 25 °C TJ VALUES UNITS 40 A 800/1200 V 475 A 1.1 V -40 to +150 °C VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V IRRM AT 150 °C mA VOLTAGE RATINGS PART NUMBER VRRM, MAXIMUM PEAK REVERSE VOLTAGE V VS-40EPS08-M3 800 900 VS-40EPS12-M3 1200 1300 1 ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Maximum average forward current IF(AV) Maximum peak one cycle non-repetitive surge current IFSM Maximum I2t for fusing I2t Maximum I2√t for fusing I2√t TEST CONDITIONS TC = 105 °C, 180° conduction half sine wave VALUES 10 ms sine pulse, rated VRRM applied 400 10 ms sine pulse, no voltage reapplied 475 10 ms sine pulse, rated VRRM applied 800 10 ms sine pulse, no voltage reapplied 1131 t = 0.1 ms to 10 ms, no voltage reapplied UNITS 40 11 310 A A2s A2√s Revision: 27-Nov-2019 Document Number: 94343 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-40EPS..-M3 Series www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL VFM Maximum forward voltage drop rt Forward slope resistance VF(TO) Threshold voltage IRM Maximum reverse leakage current TEST CONDITIONS VALUES 20 A, TJ = 25 °C 1.0 40 A, TJ = 25 °C 1.1 TJ = 150 °C TJ = 25 °C V 7.16 mΩ 0.74 V 0.1 VR = Rated VRRM TJ = 150 °C UNITS mA 1.0 THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storrage temperature range TEST CONDITIONS TJ, TStg Maximum thermal resistance, junction to case RthJC Maximum thermal resistance, junction to ambient RthJA Typical thermal resistance, case to heatsink RthCS VALUES UNITS -40 to +150 °C DC operation 0.6 40 Mounting surface, flat, smooth, and greased 0.2 Approximate weight Mounting torque 6 g 0.21 oz. minimum 6 (5) maximum 12 (10) kgf · cm (lbf · in) Marking device 40EPS08 Case style TO-247AC 2L 150 Maximum Allowable Case Temperture (°C) 140 135 130 Ø Conduction angle 125 120 30° 115 60° 90° 120° 110 40EPS12 150 VS-40EPS.. Series RthJC (DC) = 0.6 K/W 145 Maximum Allowable Case Temperature (°C) °C/W 180° 105 VS-40EPS.. Series RthJC (DC) = 0.6 K/W 140 130 Ø Conduction period 30° 120 60° 90° 120° 110 180° 100 DC 100 95 0 5 10 15 20 25 30 35 40 45 0 10 20 30 40 50 60 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Rating Characteristics Fig. 2 - Current Rating Characteristics 70 Revision: 27-Nov-2019 Document Number: 94343 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-40EPS..-M3 Series www.vishay.com Vishay Semiconductors 55 Instantaneous Forward Current (A) Maximum Average Forward Power Loss (W) 60 180° 120° 90° 60° 30° 50 45 40 RMS limit 35 30 25 Ø 20 Conduction angle 15 10 VS-40EPS.. Series TJ = 150 °C 5 0 0 5 10 15 20 25 30 35 100 TJ = 25 °C TJ = 150 °C 10 VS-40EPS.. Series 1 40 0 0.5 1.0 1.5 2.0 2.5 3.0 VFM - Forward Voltage Drop (V) Instantaneous Forward Voltage (V) Fig. 3 - Forward Power Loss Characteristics Fig. 5 - Forward Voltage Drop Chacteristics 80 500 DC 180° 120° 90° 60° 30° 70 60 50 Maximum non-repetitive surge current versus pulse train duration. Initial TJ = 150 °C No voltage reapplied Rated VRRM reapplied 450 Peak Half Sine Wave Forward Current (A) Maximum Average Forward Power Loss (W) 1000 RMS limit 40 30 Ø Conduction period 20 VS-40EPS.. Series TJ = 150°C 10 400 350 300 250 200 VS-40EPS.. Series 150 0 100 0 10 20 30 40 50 60 70 0.01 0.1 1.0 Average Forward Current (A) Pulse Train Duration (S) Fig. 4 - Forward Power Loss Characteristics Fig. 6 - Maximum Non-Repetitive Surge Current ZthJC - Transient Thermal Impedance (°C/W) 1 Steady state value: (DC operation) 0.1 Single pulse 0.01 0.001 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 0.01 VS-40EPS.. Series 0.1 1 Square Wave Pulse Duration (s) Fig. 7 - Thermal Impedance ZthJC Characteristics Revision: 27-Nov-2019 Document Number: 94343 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-40EPS..-M3 Series www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 40 E P S 12 -M3 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - Current rating (40 = 40 A) 3 - Circuit configuration: 4 - Package: 5 - P = TO-247AC 2L Type of silicon: E = single diode S = standard recovery rectifier 6 - Voltage rating 7 - Environmental digit: 08 = 800 V 12 = 1200 V -M3 = halogen-free, RoHS-compliant, and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION VS-40EPS08-M3 25 500 Antistatic plastic tubes VS-40EPS12-M3 25 500 Antistatic plastic tubes LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?96144 Part marking information www.vishay.com/doc?95648 SPICE model www.vishay.com/doc?96047 Revision: 27-Nov-2019 Document Number: 94343 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000