VS-40EPS16-M3

VS-40EPS16-M3, VS-40APS16-M3 www.vishay.com Vishay Semiconductors High Voltage, Input Rectifier Diode, 40 A FEATURES • Very low forward voltage drop • 150 °C max. operating junction temperature 1 • Glass passivated pellet chip junction 1 2 3 3 TO-247AC 2L TO-247AC 3L Base cathode according to Available • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Base cathode + 2 • Designed and qualified JEDEC®-JESD 47 APPLICATIONS 2 • Input rectification • Vishay Semiconductors switches and output rectifiers which are available in identical package outlines 1 Cathode 3 Anode VS-40EPS16-M3 1 3 Anode Anode VS-40APS16-M3 DESCRIPTION High voltage rectifiers optimized for very low forward voltage drop with moderate leakage. These devices are intended for use in main rectification (single or three phase bridge). PRIMARY CHARACTERISTICS IF(AV) 40 A VR 1600 V VF at IF 1.14 V IFSM 475 A TJ max. 150 °C Package TO-247AC 2L, TO-247AC 3L Circuit configuration Single MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS Sinusoidal waveform VALUES UNITS 40 A VRRM 1600 V IFSM 475 A VF 20 A, TJ = 25 °C 1.0 V -40 to +150 °C VRRM, MAXIMUM PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V IRRM AT 150 °C mA 1600 1700 1 TJ VOLTAGE RATINGS PART NUMBER VS-40EPS16-M3 VS-40APS16-M3 Revision: 27-Jul-2021 Document Number: 94344 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-40EPS16-M3, VS-40APS16-M3 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Maximum average forward current IF(AV) Maximum peak one cycle non-repetitive surge current IFSM Maximum I2t for fusing I2t Maximum I2√t for fusing I2√t TEST CONDITIONS VALUES TC = 105 °C, 180° conduction half sine wave UNITS 40 10 ms sine pulse, rated VRRM applied 400 10 ms sine pulse, no voltage reapplied 475 A 10 ms sine pulse, rated VRRM applied 800 10 ms sine pulse, no voltage reapplied 1131 t = 0.1 ms to 10 ms, no voltage reapplied A2s 11 310 A2√s VALUES UNITS ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL Maximum forward voltage drop VFM Forward slope resistance rt Threshold voltage VF(TO) Maximum reverse leakage current IRM TEST CONDITIONS 40 A, TJ = 25 °C TJ = 150 °C TJ = 25 °C V 7.6 mΩ 0.72 V 0.1 VR = Rated VRRM TJ = 150 °C 1.14 mA 1.0 THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TEST CONDITIONS TJ, TStg Maximum thermal resistance, junction to case RthJC Maximum thermal resistance, junction to ambient RthJA Typical thermal resistance, case to heatsink RthCS DC operation -40 to +150 °C °C/W 40 Mounting surface, flat, smooth, and greased 0.2 6 g 0.21 oz. minimum 6 (5) maximum 12 (10) kgf · cm (lbf · in) Case style TO-247AC 2L, TO-247AC modified, case style TO-247AC 3L Marking device 40EPS16 40APS16 150 150 140 Maximum Allowable Case Temperature (°C) VS-40EPS16 RthJC (DC) = 0.6 K/W 145 Maximum Allowable Case Temperature (°C) UNITS 0.6 Approximate weight Mounting torque VALUES 135 130 Ø Conduction angle 125 120 30° 60° 115 90° 120° 110 180° 105 VS-40EPS16 RthJC (DC) = 0.6 K/W 140 Ø 130 Conduction period 30° 120 60° 90° 120° 110 180° 100 DC 95 100 0 5 10 15 20 25 30 35 40 45 0 10 20 30 40 50 60 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Rating Characteristics Fig. 2 - Current Rating Characteristics 70 Revision: 27-Jul-2021 Document Number: 94344 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-40EPS16-M3, VS-40APS16-M3 www.vishay.com Vishay Semiconductors Maximum Average Forward Power Loss (W) Instantaneous Forward Current (A) 60 55 180° 120° 90° 60° 30° 50 45 40 35 RMS limit 30 25 20 Ø 15 Conduction angle 10 VS-40EPS16 TJ = 150 °C 5 0 0 10 15 20 25 30 40 35 100 TJ = 25 °C 10 TJ = 150 °C VS-40EPS16 1 0.5 1.5 2.5 Average Forward Current (A) Instantaneous Forward Voltage (V) Fig. 3 - Forward Power Loss Characteristics Fig. 5 - Forward Voltage Drop Characteristics 500 DC 180° 120° 90° 60° 30° 70 60 50 Maximum non-repetitive surge current versus pulse train duration. Initial TJ = 150 °C No voltage reapplied Rated VRRM reapplied 450 Peak Half Sine Wave Forward Current (A) 80 Maximum Average Forward Power Loss (W) 5 1000 RMS limit 40 Ø 30 Conduction period 20 VS-40EPS16 TJ = 150 °C 10 400 350 300 250 200 150 0 VS-40EPS16 100 0 10 20 30 40 60 50 70 0.01 0.1 1 Average Forward Current (A) Pulse Train Duration (s) Fig. 4 - Forward Power Loss Characteristics Fig. 6 - Maximum Non-Repetitive Surge Current ZthJC - Transient Thermal Impedance (°C/W) 1 Steady state value (DC operation) 0.1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Single pulse 0.01 0.001 0.01 VS-40EPS16 0.1 1 Square Wave Pulse Duration (s) Fig. 7 - Thermal Impedance ZthJC Characteristics Revision: 27-Jul-2021 Document Number: 94344 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-40EPS16-M3, VS-40APS16-M3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 40 E P S 16 -M3 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 3 - Current rating (40 = 40 A) Circuit configuration: A = single diode, 3 pins E = single diode, 2 pins 4 - 5 - Package: P = TO-247AC 2L / TO-247AC 3L Type of silicon: 6 - Voltage rating (16 = 1600 V) 7 - Environmental digit: S = standard recovery rectifier -M3 = halogen-free, RoHS-compliant, and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION VS-40EPS16-M3 25 500 Antistatic plastic tubes VS-40APS16-M3 25 500 Antistatic plastic tubes LINKS TO RELATED DOCUMENTS Dimensions Part marking information TO-247AC 2L www.vishay.com/doc?96144 TO-247AC 3L www.vishay.com/doc?96138 TO-247AC modified www.vishay.com/doc?95541 TO-247AC 2L www.vishay.com/doc?95648 TO-247AC 3L www.vishay.com/doc?95007 TO-247AC modified www.vishay.com/doc?95442 Revision: 27-Jul-2021 Document Number: 94344 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors TO-247AC modified - 50 mils L/F DIMENSIONS in millimeters and inches A A (3) (6) Ø P E B (2) R/2 A2 S (Datum B) Ø K M DBM Ø P1 A D2 Q 2xR (2) D1 (4) D 1 4 D 3 2 Thermal pad (5) L1 C L A See view B 2 x b2 3xb A1 b4 (b1, b3, b5) Plating View A - A C 2x e 0.10 M C A M (4) E1 Base metal D DE (c) c1 E C C (b, b2, b4) (4) Section C - C, D - D, E - E SYMBOL A A1 A2 b b1 b2 b3 b4 b5 c c1 D D1 MILLIMETERS MIN. MAX. 4.65 5.31 2.21 2.59 1.17 1.37 0.99 1.40 0.99 1.35 1.65 2.39 1.65 2.34 2.59 3.43 2.59 3.38 0.38 0.89 0.38 0.84 19.71 20.70 13.08 - INCHES MIN. MAX. 0.183 0.209 0.087 0.102 0.046 0.054 0.039 0.055 0.039 0.053 0.065 0.094 0.065 0.092 0.102 0.135 0.102 0.133 0.015 0.035 0.015 0.033 0.776 0.815 0.515 - View B NOTES 3 4 SYMBOL D2 E E1 e ØK L L1 ØP Ø P1 Q R S MILLIMETERS MIN. MAX. 0.51 1.35 15.29 15.87 13.46 5.46 BSC 0.254 14.20 16.10 3.71 4.29 3.56 3.66 7.39 5.31 5.69 4.52 5.49 5.51 BSC INCHES MIN. MAX. 0.020 0.053 0.602 0.625 0.53 0.215 BSC 0.010 0.559 0.634 0.146 0.169 0.14 0.144 0.291 0.209 0.224 0.178 0.216 0.217 BSC NOTES 3 Notes (1) Dimensioning and tolerance per ASME Y14.5M-1994 (2) Contour of slot optional (3) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Thermal pad contour optional with dimensions D1 and E1 (5) Lead finish uncontrolled in L1 (6) Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEDEC® outline TO-247 with exception of dimension c and Q Revision: 20-Apr-17 Document Number: 95541 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors TO-247AC 3L DIMENSIONS in millimeters and inches A A E (3) B A2 S R/2 (2) (Datum B) Ø P (6) Ø P1 Ø K M DBM A Q D2 2 x R (2) D1 (4) D Thermal pad 2 1 4 D 3 L1 (5) C L A See view B 2 x b2 3xb 0.10 M C A M C 2x e A1 b4 E1 (4) 0.01 M D B M (b1, b3, b5) Plating View A - A Base metal D DE (c) c1 (b, b2, b4) C A A1 A2 b b1 b2 b3 b4 b5 c c1 D D1 MILLIMETERS MIN. MAX. 4.65 5.31 2.21 2.59 1.17 1.37 0.99 1.40 0.99 1.35 1.65 2.39 1.65 2.34 2.59 3.43 2.59 3.38 0.38 0.89 0.38 0.84 19.71 20.70 13.08 - C (4) View B Section C - C, D - D, E - E SYMBOL E INCHES MIN. MAX. 0.183 0.209 0.087 0.102 0.046 0.054 0.039 0.055 0.039 0.053 0.065 0.094 0.065 0.092 0.102 0.135 0.102 0.133 0.015 0.035 0.015 0.033 0.776 0.815 0.515 - NOTES 3 4 SYMBOL D2 E E1 e ØK L L1 ØP Ø P1 Q R S MILLIMETERS MIN. MAX. 0.51 1.35 15.29 15.87 13.46 5.46 BSC 0.254 14.20 16.10 3.71 4.29 3.56 3.66 7.39 5.31 5.69 4.52 5.49 5.51 BSC INCHES MIN. MAX. 0.020 0.053 0.602 0.625 0.53 0.215 BSC 0.010 0.559 0.634 0.146 0.169 0.14 0.144 0.291 0.209 0.224 0.178 0.216 0.217 BSC NOTES 3 Notes (1) Dimensioning and tolerancing per ASME Y14.5M-1994 (2) Contour of slot optional (3) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Thermal pad contour optional with dimensions D1 and E1 (5) Lead finish uncontrolled in L1 (6) Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEDEC® outline TO-247 with exception of dimension Q Revision: 20-Jun-17 Document Number: 96138 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors TO-247AC 2L DIMENSIONS in millimeters and inches A A E (3) B A2 S R/2 (2) (Datum B) Ø P (6) Ø P1 Ø K M DBM A Q D2 2 x R (2) D1 (4) D Thermal pad 2 1 4 D 3 L1 (5) C L A See view B 2 x b2 2xb 0.10 M C A M C 2x e A1 E1 (4) 0.01 M D B M (b1, b3) Plating View A - A Base metal D D (c) c1 (b, b2) C (4) View B Section C - C, D - D SYMBOL A A1 A2 b b1 b2 b3 c c1 D D1 D2 MILLIMETERS MIN. MAX. 4.65 5.31 2.21 2.59 1.17 1.37 0.99 1.40 0.99 1.35 1.65 2.39 1.65 2.34 0.38 0.89 0.38 0.84 19.71 20.70 13.08 0.51 1.35 C INCHES MIN. MAX. 0.183 0.209 0.087 0.102 0.046 0.054 0.039 0.055 0.039 0.053 0.065 0.094 0.065 0.092 0.015 0.035 0.015 0.033 0.776 0.815 0.515 0.020 0.053 NOTES SYMBOL 3 4 E E1 e ØK L L1 ØP Ø P1 Q R S MILLIMETERS MIN. MAX. 15.29 15.87 13.46 5.46 BSC 0.254 14.20 16.10 3.71 4.29 3.56 3.66 7.39 5.31 5.69 4.52 5.49 5.51 BSC INCHES MIN. MAX. 0.602 0.625 0.53 0.215 BSC 0.010 0.559 0.634 0.146 0.169 0.14 0.144 0.291 0.209 0.224 0.178 0.216 0.217 BSC NOTES 3 Notes (1) Dimensioning and tolerancing per ASME Y14.5M-1994 (2) Contour of slot optional (3) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Thermal pad contour optional with dimensions D1 and E1 (5) Lead finish uncontrolled in L1 (6) Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEDEC® outline TO-247 with exception of dimension Q Revision: 07-Dec-17 Document Number: 96144 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 09-Jul-2021 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-40APS16PBF