VS-40L15CT-1-M3

VS-40L15CTS-M3, VS-40L15CT-1-M3 www.vishay.com Vishay Semiconductors High Performance Schottky Rectifier, 2 x 20 A FEATURES • • • • • • 125 °C TJ operation (VR < 5 V) Center tap module Optimized for OR-ing applications Ultralow forward voltage drop High frequency operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance • Guard ring for enhanced ruggedness and long term reliability • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C 2 1 1 3 D2PAK (TO-263AB) 2 Base common cathode 2 TO-262AA 3 Base common cathode 2 • Designed and qualified according to JEDEC®-JESD 47 2 1 Common 3 Anode cathode Anode 2 1 Common 3 Anode cathode Anode VS-40L15CTS-M3 VS-40L15CT-1-M3 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION The center tap Schottky rectifier module has been optimized for ultralow forward voltage drop specifically for the OR-ing of parallel power supplies. The proprietary barrier technology allows for reliable operation up to 125 °C junction temperature. Typical applications are in parallel switching power supplies, converters, reverse battery protection, and redundant power subsystems. PRIMARY CHARACTERISTICS IF(AV) 2 x 20 A VR 15 V VF at IF 0.33 V IRM max. 600 mA at 100 °C TJ max. 125 °C EAS 10 mJ Package D2PAK (TO-263AB), TO-262AA Circuit configuration Common cathode MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS Rectangular waveform VRRM VALUES UNITS 40 A 15 V A IFSM tp = 5 μs sine 700 VF 19 Apk, TJ = 125 °C (per leg, typical) 0.25 V -55 to +125 °C VS-40L15CTS-M3 VS-40L15CT-1-M3 UNITS 15 V TJ VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM TEST CONDITIONS TJ = 100 °C Revision: 21-Dec-2021 Document Number: 95733 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-40L15CTS-M3, VS-40L15CT-1-M3 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current, see fig. 5 SYMBOL per leg per device IF(AV) TEST CONDITIONS VALUES 50 % duty cycle at TC = 85 °C, rectangular waveform 5 μs sine or 3 μs rect. pulse UNITS 20 40 Following any rated load condition and with rated VRRM applied A 700 Maximum peak one cycle non-repetitive surge current per leg, see fig. 7 IFSM Non-repetitive avalanche energy per leg EAS TJ = 25 °C, IAS = 2 A, L = 6 mH 10 mJ IAR Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical 2 A Repetitive avalanche current per leg 10 ms sine or 6 ms rect. pulse 330 ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 19 A Maximum forward voltage drop per leg See fig. 1 VFM (1) TJ = 25 °C 40 A 19 A TJ = 125 °C 40 A Reverse leakage current per leg See fig. 2 IRM (1) Threshold voltage VF(TO) Forward slope resistance rt TJ = 25 °C VR = Rated VR TJ = 100 °C TYP. MAX. - 0.41 - 0.52 0.25 0.33 0.37 0.50 - 10 - 600 TJ = TJ maximum UNITS V mA 0.182 V 7.6 mΩ Maximum junction capacitance per leg CT VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C - 2000 pF Typical series inductance per leg LS Measured lead to lead 5 mm from package body 8 - nH Maximum voltage rate of change dV/dt Rated VR 10 000 V/μs Note (1) Pulse width < 300 μs, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES Maximum junction temperature range TJ -55 to +125 Maximum storage temperature range TStg -55 to +150 Maximum thermal resistance, junction to case per leg RthJC DC operation See fig. 4 1.5 Typical thermal resistance, case to heatsink RthCS Mounting surface, smooth and greased 0.50 Maximum thermal resistance, junction to ambient RthJA DC operation Approximate weight Mounting torque Marking device minimum maximum Non-lubricated threads UNITS °C °C/W 40 2 g 0.07 oz. 6 (5) kgf ⋅ cm (lbf ⋅ in) 12 (10) Case style D2PAK (TO-263AB) 40L15CTS Case style TO-262AA 40L15CT-1 Revision: 21-Dec-2021 Document Number: 95733 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-40L15CTS-M3, VS-40L15CT-1-M3 Vishay Semiconductors 1000 1000 100 TJ = 125 °C TJ = 75 °C TJ = 25 °C 10 TJ = 100 °C IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) www.vishay.com 100 TJ = 75 °C TJ = 50 °C 10 TJ = 25 °C 1 0.1 1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 1.6 3 6 9 12 15 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 10 000 TJ = 25 °C 1000 100 0 5 10 15 20 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 PDM t1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 0.01 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.1 1 10 100 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Revision: 21-Dec-2021 Document Number: 95733 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-40L15CTS-M3, VS-40L15CT-1-M3 Vishay Semiconductors 100 14 95 12 Average Power Loss (W) Allowable Case Temperature (°C) www.vishay.com 90 85 Square wave (D = 0.50) 80 75 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 10 8 RMS Limit 6 DC 4 2 See note (1) 70 0 0 4 8 12 20 16 24 0 5 10 15 20 25 30 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current L D.U.T. IRFP460 Rg = 25 Ω Current monitor High-speed switch Freewheel diode + Vd = 25 V 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR Revision: 21-Dec-2021 Document Number: 95733 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-40L15CTS-M3, VS-40L15CT-1-M3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 40 L 15 C T S 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - Current rating (40 A) 3 - L = Schottky “L” series 4 - Voltage rating (15 V) 5 - C = common cathode 6 - T = TO-220 7 - TRL -M3 8 9 S = D2PAK (TO-263AB) -1 = TO-262AA 8 - None = tube TRL = tape and reel (left oriented - for D2PAK (TO-263AB) only) TRR = tape and reel (right oriented - for D2PAK (TO-263AB) only) 9 - -M3 = halogen-free, RoHS-compliant, and termination lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N BASE QUANTITY PACKAGING DESCRIPTION VS-40L15CTS-M3 50 Antistatic plastic tubes VS-40L15CTSTRL-M3 800 13" diameter plastic tape and reel VS-40L15CTSTRR-M3 800 13" diameter plastic tape and reel VS-40L15CT-1-M3 50 Antistatic plastic tubes LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information D2PAK (TO-263AB) www.vishay.com/doc?96164 TO-262AA www.vishay.com/doc?96165 D2PAK (TO-263AB) www.vishay.com/doc?95444 TO-262AA www.vishay.com/doc?95443 www.vishay.com/doc?96424 Revision: 21-Dec-2021 Document Number: 95733 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors D2PAK DIMENSIONS in millimeters and inches Conforms to JEDEC® outline D2 PAK (SMD-220) (2)(3) E B Pad layout A A (E) c2 11.00 MIN. (0.43) A (3) L1 4 9.65 MIN. (0.38) (D1) (3) Detail A D H 1 2 17.90 (0.70) 15.00 (0.625) (2) 3 3.81 MIN. (0.15) L2 B B 2.32 MIN. (0.08) A 2 x b2 c 2.64 (0.103) 2.41 (0.096) (3) E1 C View A - A 2xb ± 0.004 M B 0.010 M A M B Plating Base Metal (4) b1, b3 H 2x e Gauge plane c1 (4) (c) B 0° to 8° Seating plane L3 Lead tip A1 L (b, b2) L4 Section B - B and C - C Scale: None Detail “A” Rotated 90 °CW Scale: 8:1 SYMBOL MILLIMETERS MIN. MAX. INCHES MIN. MAX. NOTES SYMBOL MILLIMETERS MIN. MAX. INCHES MIN. MAX. NOTES A 4.06 4.83 0.160 0.190 D1 6.86 8.00 0.270 0.315 3 A1 0.00 0.254 0.000 0.010 E 9.65 10.67 0.380 0.420 2, 3 E1 7.90 8.80 0.311 0.346 3 b 0.51 0.99 0.020 0.039 b1 0.51 0.89 0.020 0.035 b2 1.14 1.78 0.045 0.070 b3 1.14 1.73 0.045 0.068 c 0.38 0.74 0.015 0.029 c1 0.38 0.58 0.015 0.023 c2 1.14 1.65 0.045 0.065 D 8.51 9.65 0.335 0.380 4 e 2.54 BSC 0.100 BSC H 14.61 15.88 0.575 0.625 4 L 1.78 2.79 0.070 0.110 L1 - 1.65 - 0.066 4 L2 1.27 1.78 0.050 0.070 2 L4 L3 0.25 BSC 4.78 5.28 3 0.010 BSC 0.188 0.208 Notes (1) Dimensioning and tolerancing per ASME Y14.5 M-1994 (2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body (3) Thermal pad contour optional within dimension E, L1, D1 and E1 (4) Dimension b1 and c1 apply to base metal only (5) Datum A and B to be determined at datum plane H (6) Controlling dimension: inch (7) Outline conforms to JEDEC® outline TO-263AB Revision: 08-Jul-15 Document Number: 95046 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors TO-262 DIMENSIONS in millimeters and inches Modified JEDEC® outline TO-262 (Datum A) (2) (3) E A A c2 B E A (3) L1 Seating plane D 1 2 3 C L2 B D1 (3) B C L (2) A c 3 x b2 3xb E1 A1 (3) Section A - A 2xe Plating 0.010 M A M B (4) b1, b3 Base metal Lead assignments Diodes 1. - Anode (two die)/open (one die) 2., 4. - Cathode 3. - Anode Lead tip SYMBOL c1 c (4) (b, b2) Section B - B and C - C Scale: None MILLIMETERS INCHES MIN. MAX. MIN. MAX. 0.190 NOTES A 4.06 4.83 0.160 A1 2.03 3.02 0.080 0.119 b 0.51 0.99 0.020 0.039 b1 0.51 0.89 0.020 0.035 b2 1.14 1.78 0.045 0.070 b3 1.14 1.73 0.045 0.068 c 0.38 0.74 0.015 0.029 c1 0.38 0.58 0.015 0.023 c2 1.14 1.65 0.045 0.065 D 8.51 9.65 0.335 0.380 D1 6.86 8.00 0.270 0.315 3 E 9.65 10.67 0.380 0.420 2, 3 E1 7.90 8.80 0.311 0.346 3 e L 2.54 BSC 4 4 4 2 0.100 BSC 13.46 14.10 0.530 0.555 L1 - L2 3.36 1.65 - 0.065 3.71 0.132 0.146 Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body (3) Thermal pad contour optional within dimension E, L1, D1 and E1 (4) (5) (6) 3 Dimension b1 and c1 apply to base metal only Controlling dimension: inches Outline conform to JEDEC TO-262 except A1 (maximum), b (minimum) , D1 (minimum) and L2 where dimensions derived the actual package outline Revision: 11-Jul-2019 Document Number: 95419 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000