VS-50PFR80

VS-50PF(R)...(W) Series www.vishay.com Vishay Semiconductors Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 50 A FEATURES 50PF(R)... 50PF(R)...W • High surge current capability • Designed for a wide range of applications • Stud cathode and stud anode version • Wire version available • Low thermal resistance • Designed and qualified for multiple level DO-5 (DO-203AB) DO-5 (DO-203AB) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS • Battery charges PRIMARY CHARACTERISTICS • Converters IF(AV) 50 A Package DO-5 (DO-203AB) Circuit configuration Single • Power supplies • Machine tool controls • Welding MAJOR RATINGS AND CHARACTERISTICS PARAMETER TEST CONDITIONS IF(AV) I2t VRRM UNITS 50 A TC 140 °C 78 A 50 Hz 800 60 Hz 830 IF(RMS) IFSM VALUES A 50 Hz 3200 60 Hz 2900 Range 400 to 1200 V -55 to +180 °C TJ A2s ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VS-50PF(R)...(W) VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 40 400 500 80 800 960 120 1200 1440 IRRM MAXIMUM AT TJ = 150 °C mA 9 Revision: 11-Jan-18 Document Number: 93516 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-50PF(R)...(W) Series www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER SYMBOL Maximum average forward current  at case temperature Maximum RMS forward current IF(AV) TEST CONDITIONS 180° conduction, half sine wave IF(RMS) t = 10 ms Maximum peak, one-cycle forward, non-repetitive surge current IFSM t = 8.3 ms t = 10 ms t = 8.3 ms I2t Maximum I2t for fusing t = 8.3 ms I2t Low level value of threshold voltage Low level value of forward slope resistance Maximum forward voltage drop A 140 °C 78 A 800 100 % VRRM reapplied 670 830 Sinusoidal half wave, initial TJ = 150 °C A 700 3200 2900 A2s 100 % VRRM reapplied 2050 t = 0.1 ms to 10 ms, no voltage reapplied 32 000 A2s t = 10 ms t = 8.3 ms Maximum I2t for fusing UNITS 50 No voltage  reapplied No voltage  reapplied t = 10 ms VALUES 2260 VF(TO) (16.7 % x  x IF(AV) < I <  x IF(AV)), TJ = TJ maximum 0.77 V rf (16.7 % x  x IF(AV) < I <  x IF(AV)), TJ = TJ maximum 4.30 m VFM Ipk = 125 A, TJ = 25 °C, tp = 400 μs rectangular wave 1.40 V VALUES UNITS -55 to +180 °C THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction operating and storage temperature range TEST CONDITIONS TJ, TStg Maximum thermal resistance, junction to case RthJC DC operation 0.51 Maximum thermal resistance, case to heatsink RthCS Mounting surface, smooth, flat and greased 0.25 K/W Allowable mounting torque Tighting on nut (1) Not lubricated threads 3.4 + 0 - 10 % (30) Tighting on hexagon (2) lubricated threads 2.3 + 0 - 10 % (20) Approximate weight Case style See dimensions - link at the end of datasheet N·m (lbf · in) 15.8 g 0.56 oz. DO-5 (DO-203AB) Notes (1) As general recommendation we suggest to tight on Hexagon and not on nut (2) Torque must be applicable only to Hexagon and not to plastic structure RthJC CONDUCTION CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION 180° 0.11 0.10 120° 0.16 0.16 90° 0.20 0.22 60° 0.29 0.31 30° 0.49 0.50 TEST CONDITIONS UNITS TJ = TJ maximum K/W Note • The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC Revision: 11-Jan-18 Document Number: 93516 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-50PF(R)...(W) Series Vishay Semiconductors Maximum Allowable Case Temperature (°C) 180 50PF(R) Serie RthJC = 0.51 K/W 170 160 Conduction Angle 150 140 180° 120° 130 90° 120 30° 60° 110 0 10 20 30 40 50 60 180 50PF(R) Series RthJC (DC) = 0.51 K/W 170 160 Conduction Period 150 30° 140 60° 90° 130 120° 180° DC 120 0 10 20 30 40 50 60 70 80 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics 100 180° 80 120° 90° 60° 60 30° 1 1.5 K/ W 2K /W 3K RMS Limit 40 K/ W K/W 0.7 Maximum Allowable Forward Power Loss (W) Maximum Allowable Case Temperature (°C) www.vishay.com 5K /W /W Conduction Angle 7 K /W 20 50PF(R) Series Tj = 180°C 10 K/W 0 0 10 20 30 40 50 Average Forward Current (A) 0 60 30 60 90 120 150 180 Maximum Allowable Ambient Temperature (°C) 100 180° 120° 90° 80 1 1.5 K/ W 60° 30° 60 3K 5K Conduction Period 20 50PF(R) Series Tj = 180°C W 2K /W DC RMS Limit 40 K/ K/W 0.7 Maximum Allowable Forward Power Loss (W) Fig. 3 - Forward Power Loss Characteristics 7K /W /W /W 10 K/W 0 0 20 40 60 Average Forward Current (A) 0 80 30 60 90 120 150 180 Maximum Allowable Ambient Temperature (°C) Fig. 4 - Forward Power Loss Characteristics Revision: 11-Jan-18 Document Number: 93516 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-50PF(R)...(W) Series Vishay Semiconductors 1000 800 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. 700 Initial Tj = 150°C @ 60 Hz 0.0083 s 600 @ 50 Hz 0.0100 s 500 400 300 50PF(R) Series Instantaneous Forward Current (A) Peak Haf Sine Wave Forward Current (A) www.vishay.com 100 10 50PF(R) Series 1 200 1 10 0 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Maximum Non Repetitive Surge Current Versus Pulse Train Duration. 800 Initial Tj = 150°C 700 No Voltage Reapplied Rated Vrrm Reapplied 600 500 400 300 50PF(R) Series 100 0.01 0.1 1 2 3 4 Fig. 7 - Forward Voltage Drop Characteristics Transient Thermal Impedance Z thJC (K/W) Peak Haf Sine Wave Forward Current (A) 900 1 Instantaneous Forward Voltage (V) Fig. 5 - Maximum Non-Repetitive Surge Current 200 Tj = 25°C Tj = 180°C 1 Steady State Value RthJC = 0.51 K/W (DC Operation) 0.1 50PF(R) Series 0.01 0.0001 0.001 0.01 0.1 1 10 Pulse Train Duration (s) Square Wave Pulse Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current Fig. 8 - Thermal Impedance ZthJC Characteristics Revision: 11-Jan-18 Document Number: 93516 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-50PF(R)...(W) Series www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 50 PF R 120 W 1 2 3 4 5 6 1 - 2 - Vishay Semiconductors product 50 = standard device 52 = isolated lead on standard terminal with silicone sleeve available for 1200 V only (red = reverse polarity) (blue = normal polarity) 3 - 4 - PF = plastic package None = stud normal polarity (cathode to stud) R = stud reverse polarity (anode to stud) 5 - 6 - Voltage code x 10 = VRRM (see Voltage Ratings table) None = standard terminal (see dimensions for 50PF(R)... - link at the end of datasheet) W = wire terminal (see dimensions for 50PF(R)...W - link at the end of datasheet) LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95345 Revision: 11-Jan-18 Document Number: 93516 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors DO-203AB (DO-5) for 50PF(R)...(W), 80PF(R)...(W), and 95PF(R)...(W) Series DIMENSIONS FOR 80PF(R), 50PF(R), AND 95PF(R) SERIES in millimeters 6.45 MIN. Ø3 4.2 MAX. 1.2 MAX. 3.5 MIN. 4 MIN. Plastic cap. 25.4 MAX. 11.45 MAX. 2.4 REF. 11 ± 0.4 1/4"28-UNF-2A 17.25 MAX. Ø 15.95 MAX. Ø 17.15 MAX. 18.9 + 0.1 0.0 Revision: 20-Apr-16 Document Number: 95345 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors DIMENSIONS FOR 80PF(R)...(W), 50PF(R)...(W), AND 95PF(R)...(W) SERIES in millimeters 2.05 MAX. Plastic cap. 25.4 MAX. 11.45 MAX. 2.4 REF. 11 ± 0.4 1/4"-28-UNF-2A 17.25 MAX. Ø 15.95 MAX. Ø 17.15 MAX. 18.9 + 0.1 0.0 Revision: 20-Apr-16 Document Number: 95345 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors DIMENSIONS FOR 52PF(R), 82PF(R), AND 97PF(R) SERIES in millimeters 11.20 - 12.20 Ø 6.80 - 7.00 6.6 mm2 external lead with blue or red sleeve insulation 115.00 - 123.00 127.40 - 134.40 Plastic cap. 11.05 - 11.45 2.4 REF. 10.60 - 11.40 1/4"-28-UNF-2A Revision: 20-Apr-16 Document Number: 95345 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000