VS-50WQ06FNTRPBF

VS-50WQ06FNPbF www.vishay.com Vishay Semiconductors High Performance Schottky Rectifier, 5.5 A FEATURES Base cathode 4, 2 • Popular D-PAK outline • Small foot print, surface mountable • Low forward voltage drop 1 Anode D-PAK (TO-252AA) 3 Anode • High frequency operation • Guard ring for enhanced ruggedness and long term reliability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C PRODUCT SUMMARY Package D-PAK (TO-252AA) IF(AV) 5.5 A VR 60 V VF at IF See Electrical table IRM 35 mA at 125 °C TJ max. 150 °C Diode variation Single die EAS 7 mJ • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION The VS-50WQ06FNPbF surface mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS VALUES UNITS 5.5 A 60 V Rectangular waveform VRRM IFSM tp = 5 μs sine 320 A VF 5 Apk, TJ = 125 °C 0.54 V TJ Range -40 to +150 °C VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VS-50WQ06FNPbF UNITS 60 V VR Maximum working peak reverse voltage VRWM ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS Maximum average forward current See fig. 5 IF(AV) Maximum peak one cycle non-repetitive surge current See fig. 7 IFSM Non-repetitive avalanche energy EAS TJ = 25 °C, IAS = 1.2 A, L = 10 mH Repetitive avalanche current IAR Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical 50 % duty cycle at TC = 132 °C, rectangular waveform 5 μs sine or 3 μs rect. pulse 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied VALUES UNITS 5.5 320 A 105 7 mJ 0.8 A Revision: 14-Jan-11 Document Number: 94234 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-50WQ06FNPbF www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 5A Maximum forward voltage drop See fig. 1 VFM (1) TJ = 25 °C 10 A 5A TJ = 125 °C 10 A Maximum reverse leakage current See fig. 2 IRM (1) Threshold voltage VF(TO) Forward slope resistance rt Typical junction capacitance CT Typical series inductance Maximum voltage rate of change LS dV/dt TJ = 25 °C VR = Rated VR TJ = 125 °C TJ = TJ maximum VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C Measured lead to lead 5 mm from package body Rated VR VALUES UNITS 0.57 0.74 V 0.54 0.68 3 mA 35 0.35 V 25.5 m 360 pF 5.0 nH 10 000 V/μs VALUES UNITS -40 to +150 °C 3.0 °C/W Note (1) Pulse width < 300 μs, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TJ (1), TStg Maximum thermal resistance,  junction to case RthJC TEST CONDITIONS DC operation See fig. 4 Approximate weight Marking device Case style D-PAK (similar to TO-252AA) 0.3 g 0.01 oz. 50WQ06FN Note (1) dP tot 1 ------------- < -------------- thermal runaway condition for a diode on its own heatsink dT J R thJA Revision: 14-Jan-11 Document Number: 94234 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-50WQ06FNPbF Vishay Semiconductors 100 100 TJ = 150 °C IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) www.vishay.com TJ = 150 °C TJ = 125 °C TJ = 25 °C 10 TJ = 125 °C 10 TJ = 100 °C 1 TJ = 75 °C 0.1 TJ = 50 °C TJ = 25 °C 0.01 0.001 1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 0 10 20 30 40 50 60 VR - Reverse Voltage (V) VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 1000 TJ = 25 °C 100 10 0 10 20 30 40 50 70 60 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 PDM t1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 t2 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 0.1 0.001 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 1 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Revision: 14-Jan-11 Document Number: 94234 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-50WQ06FNPbF Vishay Semiconductors 5 155 150 145 Average Power Loss (W) Allowable Case Temperature (°C) www.vishay.com DC 140 135 Square wave (D = 0.50) 80 % rated VR applied 130 125 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 4 3 RMS limit 2 DC 1 120 See note (1) 0 115 0 1 2 3 4 5 6 7 0 8 1 2 3 4 5 6 7 8 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) 1000 100 At any rated load condition and with rated VRRM applied following surge 1 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR Revision: 14-Jan-11 Document Number: 94234 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-50WQ06FNPbF www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 50 W Q 06 FN 1 2 3 4 5 6 1 - Vishay Semiconductors product 2 - Current rating (5.5 A) 3 - TRL PbF 7 8 Package identifier: W = D-PAK 4 - Schottky “Q” series 5 - Voltage rating (06 = 60 V) 6 - FN = TO-252AA (D-PAK) 7 - None = tube (50 pieces) TR = tape and reel TRL = tape and reel (left oriented) TRR = tape and reel (right oriented) 8 - PbF = lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95016 Part marking information www.vishay.com/doc?95059 Packaging information www.vishay.com/doc?95033 Revision: 14-Jan-11 Document Number: 94234 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors D-PAK (TO-252AA) DIMENSIONS in millimeters and inches (5) A E b3 Pad layout C A (3) 0.010 M C A B c2 A L3 (3) Ø1 4 Ø2 4 B Seating plane H D (5) 1 2 3 (2) L5 b 1 A c b2 0.06 MIN. (1.524) 0.010 M C A B 0.093 (2.38) 0.085 (2.18) (L1) Detail “C” Rotated 90 °CW Scale: 20:1 H (7) Lead tip C Gauge plane L2 SYMBOL 2 0.488 (12.40) 0.409 (10.40) 0.089 MIN. (2.28) Detail “C” 2x e 0.245 MIN. (6.23) D1 L4 3 0.265 MIN. (6.74) E1 MILLIMETERS INCHES C Seating plane C Ø L NOTES A1 SYMBOL MILLIMETERS MIN. MAX. INCHES MIN. MAX. MIN. MAX. A 2.18 2.39 0.086 0.094 e A1 - 0.13 - 0.005 H 9.40 10.41 0.370 0.410 1.40 1.78 0.055 0.070 2.29 BSC MIN. MAX. 0.090 BSC b 0.64 0.89 0.025 0.035 L b2 0.76 1.14 0.030 0.045 L1 b3 4.95 5.46 0.195 0.215 c 0.46 0.61 0.018 0.024 L3 0.89 1.27 0.035 0.050 c2 0.46 0.89 0.018 0.035 L4 - 1.02 - 0.040 3 2.74 BSC L2 0.51 BSC NOTES 0.108 REF. 0.020 BSC D 5.97 6.22 0.235 0.245 5 L5 1.14 1.52 0.045 0.060 D1 5.21 - 0.205 - 3 Ø 0° 10° 0° 10° E 6.35 6.73 0.250 0.265 5 Ø1 0° 15° 0° 15° E1 4.32 - 0.170 - 3 Ø2 25° 35° 25° 35° 3 2 Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Lead dimension uncontrolled in L5 (3) Dimension D1, E1, L3 and b3 establish a minimum mounting surface for thermal pad (4) Section C - C dimension apply to the flat section of the lead between 0.13 and 0.25 mm (0.005 and 0.10") from the lead tip (5) Dimension D, and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (6) Dimension b1 and c1 applied to base metal only (7) Datum A and B to be determined at datum plane H (8) Outline conforms to JEDEC outline TO-252AA Revision: 05-Dec-12 Document Number: 95016 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-50WQ06FNPBF VS-50WQ06FNTRLPBF VS-50WQ06FNTRPBF VS-50WQ06FNTRRPBF 50WQ06FN 50WQ06FNTR 50WQ06FNTRL 50WQ06FNTRR