VS-80APF06PBF

VS-80APF0..PbF Series, VS-80APF0..-M3 Series www.vishay.com Vishay Semiconductors Fast Soft Recovery Rectifier Diode, 80 A FEATURES Base • Glass passivated pellet chip junction cathode + 2 • 150 °C max. operating junction temperature • Low forward voltage drop and short reverse recovery time • Designed and qualified JEDEC®-JESD 47 TO-247AC 1 Anode - 3 - Anode PRODUCT SUMMARY according to • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Available APPLICATIONS Package TO-247AC IF(AV) 80 A VR 200 V, 400 V, 600 V VF at IF 1.25 V IFSM 1000 A trr 70 ns TJ max. 150 °C Diode variation Single die Snap factor 0.5 These devices are intended for use in output rectification and freewheeling in inverters, choppers and converters as well as in input rectification where severe restrictions on conducted EMI should be met. DESCRIPTION The VS-80APF0... soft recovery rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop. The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VRRM IF(AV) Sinusoidal waveform IFSM VALUES UNITS 200 to 600 V 80 A 1000 trr 1 A, - 100 A/μs VF 40 A, TJ = 25 °C TJ Range 70 ns 1.1 V -40 to +150 °C VOLTAGE RATINGS VRRM, MAXIMUM PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V VS-80APF02PbF, VS-80APF02-M3 200 300 VS-80APF04PbF, VS-80APF04-M3 400 500 VS-80APF06PbF, VS-80APF06-M3 600 700 PART NUMBER IRRM AT 150 °C mA 17 Revision: 11-Feb-16 Document Number: 93722 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-80APF0..PbF Series, VS-80APF0..-M3 Series www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Maximum average forward current IF(AV) Maximum peak one cycle non-repetitive surge current IFSM Maximum I2t for fusing I2t Maximum I2t for fusing I2t TEST CONDITIONS VALUES TC = 95 °C, 180° conduction half sine wave UNITS 80 10 ms sine pulse, rated VRRM applied 850 10 ms sine pulse, no voltage reapplied 1000 10 ms sine pulse, rated VRRM applied 3610 10 ms sine pulse, no voltage reapplied 5100 t = 0.1 ms to 10 ms, no voltage reapplied A A2s 51 000 A2s VALUES UNITS ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL Maximum forward voltage drop Forward slope resistance VFM rt Threshold voltage VF(TO) Maximum reverse leakage current IRM TEST CONDITIONS 80 A, TJ = 25 °C TJ = 150 °C TJ = 25 °C VR = Rated VRRM TJ = 150 °C 1.25 V 3.5 m 0.85 V 0.1 mA 17 RECOVERY CHARACTERISTICS PARAMETER SYMBOL Reverse recovery time trr Reverse recovery current Irr Reverse recovery charge Qrr Snap factor TEST CONDITIONS IF at 40 Apk 25 A/μs 25 °C S VALUES UNITS 190 ns 3.4 A 0.5 μC IFM trr di dt 0.5 t Qrr IRM(REC) THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TEST CONDITIONS TJ, TStg Maximum thermal resistance, junction to case RthJC Maximum thermal resistance, junction to ambient RthJA Typical thermal resistance,  case to heatsink RthCS DC operation UNITS -40 to +150 °C 0.35 °C/W 40 Mounting surface, smooth, and greased 0.2 6 g 0.21 oz. minimum 6 (5) maximum 12 (10) kgf · cm (Ibf · in) Approximate weight Mounting torque VALUES 80APF02 Marking device Case style TO-247AC 80APF04 80APF06 Revision: 11-Feb-16 Document Number: 93722 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-80APF0..PbF Series, VS-80APF0..-M3 Series www.vishay.com Vishay Semiconductors 180 RthJC (DC) = 0.35 K/W 140 130 Ø Conduction angle 120 110 30° 100 120° 60° 90 90° Maximum Average Forward Power Loss (W) Maximum Allowable Case Temperature (°C) 150 180° DC 180° 120° 90° 60° 30° 160 140 120 RMS limit 100 80 60 Ø 40 Conduction period 20 TJ = 150 °C 0 80 0 10 30 20 40 50 70 60 90 80 0 Average Forward Current (A) 60 80 100 120 140 Fig. 4 - Forward Power Loss Characteristics 1000 150 140 130 Ø Conduction period 120 110 30° 100 60° 90° 90 DC 180° 40 60 80 100 120 Peak Half Sine Wave Forward Current (A) 900 RMS limit 60 Ø 40 Conduction angle 20 TJ = 150 °C 20 30 100 40 50 60 70 80 Maximum non-repetitive surge current versus pulse train duration. Initial TJ = 150 °C No voltage reapplied Rated VRRM reapplied 800 700 600 500 400 300 0 10 10 1000 80 0 400 Number of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current 180° 120° 90° 60° 30° 100 500 1 Fig. 2 - Current Rating Characteristics 120 600 140 Average Forward Current (A) 140 700 200 80 20 Initial TJ = 150 °C at 60 Hz 0.0083 s at 50 Hz 0.0100 s 800 300 120° 0 At any rated load condition and with rated VRRM applied following surge. 900 RthJC (DC) = 0.35 K/W Peak Half Sine Wave Forward Current (A) Maximum Allowable Case Temperature (°C) 40 Average Forward Current (A) Fig. 1 - Current Rating Characteristics Maximum Average Forward Power Loss (W) 20 90 200 0.01 0.1 1 Average Forward Current (A) Pulse Train Duration (s) Fig. 3 - Forward Power Loss Characteristics Fig. 6 - Maximum Non-Repetitive Surge Current Revision: 11-Feb-16 Document Number: 93722 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-80APF0..PbF Series, VS-80APF0..-M3 Series Instantaneous Forward Current (A) www.vishay.com Vishay Semiconductors 1000 100 TJ = 25 °C TJ = 150 °C 10 80EPF.. Series 1 0 0.5 1.0 1.5 2.0 2.5 3.5 3.0 4.0 Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics 0.22 4.0 IFM = 125 A 3.5 0.18 IFM = 40 A IFM = 80 A 0.16 IFM = 20 A IFM = 10 A 0.14 0.12 0.10 0.08 0.06 Qrr - Typical Reverse Recovery Charge (µC) trr - Typical Reverse Recovery Time (µs) 0.20 0.04 IFM = 40 A 2.5 2.0 IFM = 20 A 1.5 IFM = 10 A 1.0 IFM = 1 A 0 0 40 80 120 160 200 0 40 80 120 160 200 dI/dt - Rate of Fall of Forward Current (A/µs) dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 8 - Recovery Time Characteristics, TJ = 25 °C Fig. 10 - Recovery Charge Characteristics, TJ = 25 °C 0.6 14 0.5 12 Qrr - Typical Reverse Recovery Charge (µC) trr - Typical Reverse Recovery Time (µs) IFM = 80 A 3.0 0.5 IFM = 1 A TJ = 25 °C IFM = 125 A TJ = 25 °C IFM = 80 A 0.4 IFM = 40 A 0.3 IFM = 20 A IFM = 10 A 0.2 IFM = 1 A 0.1 IFM = 80 A TJ = 150 °C 10 8 IFM = 40 A 6 IFM = 20 A IFM = 10 A 4 2 TJ = 150 °C IFM = 1 A 0 0 0 40 80 120 160 200 0 40 80 120 160 200 dI/dt - Rate of Fall of Forward Current (A/µs) dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 9 - Recovery Time Characteristics, TJ = 150 °C Fig. 11 - Recovery Charge Characteristics, TJ = 150 °C Revision: 11-Feb-16 Document Number: 93722 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-80APF0..PbF Series, VS-80APF0..-M3 Series www.vishay.com Vishay Semiconductors 45 22 IFM = 125 A TJ = 25 °C 18 40 IFM = 80 A Irr - Typical Reverse Recovery Current (A) Irr - Typical Reverse Recovery Current (A) 20 IFM = 40 A 16 14 IFM = 20 A 12 IFM = 10 A 10 8 6 IFM = 1 A 4 TJ = 150 °C 35 IFM = 80 A IFM = 40 A IFM = 20 A IFM = 10 A IFM = 1 A 30 25 20 15 10 5 2 0 0 40 0 80 120 160 200 0 40 80 120 160 200 dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 12 - Recovery Current Characteristics, TJ = 25 °C Fig. 13 - Recovery Current Characteristics, TJ = 150 °C ZthJC - Transient Thermal Impedance (K/W) dI/dt - Rate of Fall of Forward Current (A/µs) 1 Steady state value (DC operation) 0.1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Single pulse 80EPF.. Series 0.01 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 14 - Thermal Impedance ZthJC Characteristics Revision: 11-Feb-16 Document Number: 93722 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-80APF0..PbF Series, VS-80APF0..-M3 Series www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 80 A P F 06 PbF 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - Current rating (80 = 80 A) 3 - Circuit configuration: A = single diode, 3 pins 4 - 5 - Package: P = TO-247AC Type of silicon: F = fast recovery 6 - Voltage code x 100 = VRRM 7 - Environmental digit: 02 = 200 V 04 = 400 V 06 = 600 V PbF = lead (Pb)-free and RoHS-compliant -M3 = halogen-free, RoHS-compliant, and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION VS-80APF02PbF 25 500 Antistatic plastic tubes VS-80APF02-M3 25 500 Antistatic plastic tubes VS-80APF04PbF 25 500 Antistatic plastic tubes VS-80APF04-M3 25 500 Antistatic plastic tubes VS-80APF06PbF 25 500 Antistatic plastic tubes VS-80APF06-M3 25 500 Antistatic plastic tubes LINKS TO RELATED DOCUMENTS Dimensions Part marking information www.vishay.com/doc?95542 TO-247AC PbF www.vishay.com/doc?95226 TO-247AC -M3 www.vishay.com/doc?95007 Revision: 11-Feb-16 Document Number: 93722 6 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors TO-247 - 50 mils L/F DIMENSIONS in millimeters and inches A A (3) (6) Φ P E B (2) R/2 N A2 S (Datum B) Ø K M DBM Φ P1 A D2 Q 2xR (2) D1 (4) D 1 4 D 3 2 Thermal pad (5) L1 C L A See view B 2 x b2 3xb 0.10 M C A M 0.01 M D B M View A - A C 2x e A1 b4 (b1, b3, b5) Plating (4) E1 Base metal D DE (c) c1 E C C (b, b2, b4) (4) Section C - C, D - D, E - E SYMBOL A A1 A2 b b1 b2 b3 b4 b5 c c1 D D1 MILLIMETERS MIN. MAX. 4.65 5.31 2.21 2.59 1.17 1.37 0.99 1.40 0.99 1.35 1.65 2.39 1.65 2.34 2.59 3.43 2.59 3.38 0.38 0.89 0.38 0.84 19.71 20.70 13.08 - INCHES MIN. MAX. 0.183 0.209 0.087 0.102 0.046 0.054 0.039 0.055 0.039 0.053 0.065 0.094 0.065 0.092 0.102 0.135 0.102 0.133 0.015 0.035 0.015 0.033 0.776 0.815 0.515 - View B NOTES SYMBOL 3 4 D2 E E1 e ØK L L1 N ØP Ø P1 Q R S MILLIMETERS MIN. MAX. 0.51 1.35 15.29 15.87 13.46 5.46 BSC 0.254 14.20 16.10 3.71 4.29 7.62 BSC 3.56 3.66 7.39 5.31 5.69 4.52 5.49 5.51 BSC INCHES MIN. MAX. 0.020 0.053 0.602 0.625 0.53 0.215 BSC 0.010 0.559 0.634 0.146 0.169 0.3 0.14 0.144 0.291 0.209 0.224 0.178 0.216 0.217 BSC NOTES 3 Notes (1) Dimensioning and tolerancing per ASME Y14.5M-1994 (2) Contour of slot optional (3) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Thermal pad contour optional with dimensions D1 and E1 (5) Lead finish uncontrolled in L1 (6) Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEDEC® outline TO-247 with exception of dimension c and Q Revision: 21-Apr-15 Document Number: 95542 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-80APF06PBF