VS-8ETH03SHM3

VS-8ETH03SHM3, VS-8ETH03-1HM3 www.vishay.com Vishay Semiconductors Hyperfast Rectifier, 8 A FRED Pt® FEATURES • Hyperfast recovery time • Low forward voltage drop • Low leakage current • 175 °C operating junction temperature D2PAK (TO-263AB) • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C TO-262AA Base cathode 2 • AEC-Q101 qualified 2 • Meets JESD 201 class 1 whisker test • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION / APPLICATIONS 3 1 3 Anode 1 N/C N/C Vishay Semiconductors 300 V series are the state of the art hyperfast recovery rectifiers designed with optimized performance of forward voltage drop and hyperfast recovery time. Anode VS-8ETH03-1HM3 VS-8ETH03SHM3 PRIMARY CHARACTERISTICS IF(AV) 8A VR 300 V VF at IF 0.83 V The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. trr 35 ns TJ max. 175 °C Package D2PAK (TO-263AB), TO-262AA Circuit configuration Single These devices are intended for use in the output rectification stage of SMPS, UPS, DC/DC converters as well as freewheeling diodes in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS MAX. UNITS 300 V Repetitive peak reverse voltage VRRM Average rectified forward current IF(AV) TC = 155 °C 8 Non-repetitive peak surge current IFSM TC = 25 °C 100 Operating junction and storage temperatures TJ, TStg A -55 to +175 °C ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage Forward voltage SYMBOL VBR, VR VF TEST CONDITIONS IR = 100 μA IF = 8 A MIN. TYP. MAX. 300 - - - 1.0 1.25 1.00 IF = 8 A, TJ = 125 °C - 0.83 VR = VR rated - 0.02 20 TJ = 125 °C, VR = VR rated - 6.0 200 UNITS V Reverse leakage current IR Junction capacitance CT VR = 300 V - 31 - pF Series inductance LS Measured lead to lead 5 mm from package body - 8 - nH μA Revision: 12-Jun-2023 Document Number: 96124 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8ETH03SHM3, VS-8ETH03-1HM3 www.vishay.com Vishay Semiconductors DYNAMIC RECOVERY CHARACTERISTICS (TC = 25 °C unless otherwise specified) PARAMETER SYMBOL Reverse recovery time trr Peak recovery current TEST CONDITIONS MIN. TYP. MAX. IF = 1 A, dIF/dt = - 50 A/μs, VR = 30 V - - 35 TJ = 25 °C - 27 - TJ = 125 °C - 40 - TJ = 25 °C IRRM TJ = 125 °C - 2.2 - - 5.3 - ns A - 30 - - 106 - MIN. TYP. MAX. UNITS TJ, TStg -55 - 175 °C Thermal resistance, junction to case per leg RthJC - 1.45 2.5 Thermal resistance, junction to ambient per leg RthJA Typical socket mount - - 70 Thermal resistance, case to heatsink RthCS Mounting surface, flat, smooth and greased - 0.2 - Reverse recovery charge TJ = 25 °C IF = 8 A dIF/dt = - 200 A/μs VR = 200 V UNITS Qrr TJ = 125 °C nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TEST CONDITIONS Weight Mounting torque Marking device 2.0 - g - 0.07 - oz. 6.0 (5.0) - 12 (10) kgf · cm (lbf · in) Case style D2PAK (TO-263AB) 8ETH03SH 8ETH03-1H 1000 IR - Reverse Current (µA) IF - Instantaneous Forward Current (A) - Case style TO-262 100 10 TJ = 175 °C TJ = 125 °C TJ = 25 °C 1 0.4 °C/W TJ = 175 °C 100 TJ = 150 °C 10 TJ = 125 °C TJ = 100 °C 1 0.1 TJ = 25 °C 0.01 0.001 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 50 100 150 200 250 300 VF - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage Revision: 12-Jun-2023 Document Number: 96124 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8ETH03SHM3, VS-8ETH03-1HM3 www.vishay.com Vishay Semiconductors CT - Junction Capacitance (pF) 1000 100 TJ = 25 °C 10 0 100 50 150 200 250 300 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Impedance (°C/W) 10 1 PDM D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 1 . 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics 10 Average Power Loss (W) Allowable Case Temperature (°C) 180 170 DC 160 Square wave (D = 0.50) Rated VR applied 150 140 8 RMS limit 6 D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 4 2 DC See note (1) 130 0 0 2 4 6 8 10 12 14 0 2 4 6 8 10 12 IF(AV) - Average Forward Current (A) IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Revision: 12-Jun-2023 Document Number: 96124 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8ETH03SHM3, VS-8ETH03-1HM3 www.vishay.com Vishay Semiconductors 1000 100 Qrr (nC) trr (ns) IF = 8 A , TJ = 125 °C IF = 8 A , TJ = 125 °C 100 IF = 8 A , TJ = 25 °C IF = 8 A , TJ = 25 °C 10 100 10 100 1000 1000 dIF/dt (A/µs) dIF/dt (A/µs) Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt Fig. 8 - Typical Stored Charge vs. dIF/dt Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = inverse power loss = VR1 x IR (1 - D); IR at VR1 = rated VR (1) (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM di(rec)M/dt (5) 0.75 IRRM (1) diF/dt (1) diF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) di(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 9 - Reverse Recovery Waveform and Definitions Revision: 12-Jun-2023 Document Number: 96124 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8ETH03SHM3, VS-8ETH03-1HM3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 8 E T H 03 S TRL H M3 1 2 3 4 5 6 7 8 9 10 1 - Vishay Semiconductors product 2 - Current rating (8 A) 3 - E = single diode 4 - T = TO-220, D2PAK 5 - H = hyperfast rectifier 6 - Voltage rating (03 = 300 V) 7 - 8 - S = D2PAK -1 = TO-262 None = tube (50 pieces) TRL = tape and reel (left oriented, for D2PAK package) TRR = tape and reel (right oriented, for D2PAK package) 9 - H = AEC-Q101 qualified 10 - M3 = halogen-free, RoHS-compliant, and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N BASE QUANTITY VS-8ETH03SHM3 50 PACKAGING DESCRIPTION Antistatic plastic tube VS-8ETH03-1HM3 50 Antistatic plastic tube VS-8ETH03STRRHM3 800 13" diameter reel VS-8ETH03STRLHM3 800 13" diameter reel LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information TO-263AB (D2PAK) www.vishay.com/doc?95046 TO-262AA www.vishay.com/doc?95419 TO-263AB (D2PAK) www.vishay.com/doc?95444 TO-262AA www.vishay.com/doc?95443 TO-263AB (D2PAK) www.vishay.com/doc?95032 Revision: 12-Jun-2023 Document Number: 96124 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors D2PAK DIMENSIONS in millimeters and inches Conforms to JEDEC® outline D2 PAK (SMD-220) (2)(3) E B Pad layout A A (E) c2 11.00 MIN. (0.43) A (3) L1 4 9.65 MIN. (0.38) (D1) (3) Detail A D H 1 2 17.90 (0.70) 15.00 (0.625) (2) 3 3.81 MIN. (0.15) L2 B B 2.32 MIN. (0.08) A 2 x b2 c 2.64 (0.103) 2.41 (0.096) (3) E1 C View A - A 2xb ± 0.004 M B 0.010 M A M B Plating Base Metal (4) b1, b3 H 2x e Gauge plane c1 (4) (c) B 0° to 8° Seating plane L3 Lead tip A1 L (b, b2) L4 Section B - B and C - C Scale: None Detail “A” Rotated 90 °CW Scale: 8:1 SYMBOL MILLIMETERS MIN. MAX. INCHES MIN. MAX. NOTES SYMBOL MILLIMETERS MIN. MAX. INCHES MIN. MAX. NOTES A 4.06 4.83 0.160 0.190 D1 6.86 8.00 0.270 0.315 3 A1 0.00 0.254 0.000 0.010 E 9.65 10.67 0.380 0.420 2, 3 E1 7.90 8.80 0.311 0.346 3 b 0.51 0.99 0.020 0.039 b1 0.51 0.89 0.020 0.035 b2 1.14 1.78 0.045 0.070 b3 1.14 1.73 0.045 0.068 c 0.38 0.74 0.015 0.029 c1 0.38 0.58 0.015 0.023 c2 1.14 1.65 0.045 0.065 D 8.51 9.65 0.335 0.380 4 e 2.54 BSC 0.100 BSC H 14.61 15.88 0.575 0.625 4 L 1.78 2.79 0.070 0.110 L1 - 1.65 - 0.066 4 L2 1.27 1.78 0.050 0.070 2 L4 L3 0.25 BSC 4.78 5.28 3 0.010 BSC 0.188 0.208 Notes (1) Dimensioning and tolerancing per ASME Y14.5 M-1994 (2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body (3) Thermal pad contour optional within dimension E, L1, D1 and E1 (4) Dimension b1 and c1 apply to base metal only (5) Datum A and B to be determined at datum plane H (6) Controlling dimension: inch (7) Outline conforms to JEDEC® outline TO-263AB Revision: 08-Jul-15 Document Number: 95046 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors TO-262 DIMENSIONS in millimeters and inches Modified JEDEC® outline TO-262 (Datum A) (2) (3) E A A c2 B E A (3) L1 Seating plane D 1 2 3 C L2 B D1 (3) B C L (2) A c 3 x b2 3xb E1 A1 (3) Section A - A 2xe Plating 0.010 M A M B (4) b1, b3 Base metal Lead assignments Diodes 1. - Anode (two die)/open (one die) 2., 4. - Cathode 3. - Anode Lead tip SYMBOL c1 c (4) (b, b2) Section B - B and C - C Scale: None MILLIMETERS INCHES MIN. MAX. MIN. MAX. 0.190 NOTES A 4.06 4.83 0.160 A1 2.03 3.02 0.080 0.119 b 0.51 0.99 0.020 0.039 b1 0.51 0.89 0.020 0.035 b2 1.14 1.78 0.045 0.070 b3 1.14 1.73 0.045 0.068 c 0.38 0.74 0.015 0.029 c1 0.38 0.58 0.015 0.023 c2 1.14 1.65 0.045 0.065 D 8.51 9.65 0.335 0.380 D1 6.86 8.00 0.270 0.315 3 E 9.65 10.67 0.380 0.420 2, 3 E1 7.90 8.80 0.311 0.346 3 e L 2.54 BSC 4 4 4 2 0.100 BSC 13.46 14.10 0.530 0.555 L1 - L2 3.36 1.65 - 0.065 3.71 0.132 0.146 Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body (3) Thermal pad contour optional within dimension E, L1, D1 and E1 (4) (5) (6) 3 Dimension b1 and c1 apply to base metal only Controlling dimension: inches Outline conform to JEDEC TO-262 except A1 (maximum), b (minimum) , D1 (minimum) and L2 where dimensions derived the actual package outline Revision: 11-Jul-2019 Document Number: 95419 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000