VS-8ETH03SPBF

8ETH03S/8ETH03-1 Vishay High Power Products Hyperfast Rectifier, 8 A FRED PtTM FEATURES • Hyperfast recovery time 8ETH03-1 8ETH03S • Low forward voltage drop • Low leakage current • 175 °C operating junction temperature • Designed and qualified for industrial level Base cathode 2 2 N/C D2PAK 300 V series are the state of the art hyperfast recovery rectifiers designed with optimized performance of forward voltage drop and hyperfast recovery time. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in the output rectification stage of SMPS, UPS, dc-to-dc converters as well as freewheeling diodes in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. 3 1 3 Anode 1 N/C DESCRIPTION/APPLICATIONS Anode TO-262 PRODUCT SUMMARY trr 35 ns IF(AV) 8A VR 300 V ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS MAX. UNITS 300 V Repetitive peak reverse voltage VRRM Average rectified forward current IF(AV) TC = 155 °C 8 Non-repetitive peak surge current IFSM TC = 25 °C 100 Operating junction and storage temperatures TJ, TStg A - 65 to 175 °C ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage SYMBOL VBR, VR TEST CONDITIONS MIN. TYP. MAX. 300 - - IF = 8 A - 1.0 1.25 IF = 8 A, TJ = 125 °C - 0.83 1.00 VR = VR rated - 0.02 20 TJ = 125 °C, VR = VR rated - 6.0 200 IR = 100 µA UNITS V Forward voltage VF Reverse leakage current IR Junction capacitance CT VR = 300 V - 31 - pF Series inductance LS Measured lead to lead 5 mm from package body - 8 - nH Document Number: 93933 Revision: 08-Sep-08 For technical questions, contact: diodes-tech@vishay.com µA www.vishay.com 1 8ETH03S/8ETH03-1 Vishay High Power Products Hyperfast Rectifier, 8 A FRED PtTM DYNAMIC RECOVERY CHARACTERISTICS (TC = 25 °C unless otherwise specified) PARAMETER Reverse recovery time SYMBOL trr TEST CONDITIONS MIN. TYP. MAX. IF = 1 A, dIF/dt = - 50 A/µs, VR = 30 V - - 35 TJ = 25 °C - 27 - TJ = 125 °C UNITS ns - 40 - - 2.2 - - 5.3 - TJ = 25 °C - 30 - TJ = 125 °C - 106 - MIN. TYP. MAX. UNITS TJ, TStg - 65 - 175 °C Thermal resistance, junction to case per leg RthJC - 1.45 2.5 Thermal resistance, junction to ambient per leg RthJA Typical socket mount - - 70 Thermal resistance, case to heatsink RthCS Mounting surface, flat, smooth and greased - 0.2 - - 2.0 - g - 0.07 - oz. 6.0 (5.0) - 12 (10) kgf · cm (lbf · in) Peak recovery current Reverse recovery charge IRRM Qrr TJ = 25 °C TJ = 125 °C IF = 8 A dIF/dt = - 200 A/µs VR = 200 V A nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range SYMBOL TEST CONDITIONS Weight Mounting torque Marking device www.vishay.com 2 Case style D2PAK 8ETH03S Case style TO-262 8ETH03-1 For technical questions, contact: diodes-tech@vishay.com °C/W Document Number: 93933 Revision: 08-Sep-08 8ETH03S/8ETH03-1 Hyperfast Rectifier, 8 A FRED PtTM 1000 IR - Reverse Current (µA) IF - Instantaneous Forward Current (A) 100 10 TJ = 175 °C TJ = 125 °C TJ = 25 °C 1 0.4 Vishay High Power Products TJ = 175 °C 100 TJ = 150 °C 10 TJ = 125 °C TJ = 100 °C 1 0.1 TJ = 25 °C 0.01 0.001 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 2.0 100 50 150 200 250 300 VF - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 1000 100 TJ = 25 °C 10 0 50 100 150 200 250 300 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Impedance (°C/W) 10 1 PDM 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.001 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 1 . 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 93933 Revision: 08-Sep-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 8ETH03S/8ETH03-1 Hyperfast Rectifier, 8 A FRED PtTM Vishay High Power Products 100 170 DC 160 Square wave (D = 0.50) Rated VR applied 150 IF = 8 A , TJ = 25 °C 140 See note (1) 10 100 130 0 2 4 6 8 10 12 14 1000 IF(AV) - Average Forward Current (A) dIF/dt (A/µs) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt 10 1000 8 RMS limit 6 D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 4 2 Qrr (nC) Average Power Loss (W) IF = 8 A , TJ = 125 °C trr (ns) Allowable Case Temperature (°C) 180 DC 0 0 2 4 6 8 10 12 IF = 8 A , TJ = 125 °C 100 IF = 8 A , TJ = 25 °C 10 100 1000 IF(AV) - Average Forward Current (A) dIF/dt (A/µs) Fig. 6 - Forward Power Loss Characteristics Fig. 8 - Typical Stored Charge vs. dIF/dt Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR (1) www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 93933 Revision: 08-Sep-08 8ETH03S/8ETH03-1 Hyperfast Rectifier, 8 A FRED PtTM Vishay High Power Products VR = 200 V 0.01 Ω L = 70 µH D.U.T. dIF/dt adjust D IRFP250 G S Fig. 9 - Reverse Recovery Parameter Test Circuit (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Document Number: 93933 Revision: 08-Sep-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 8ETH03S/8ETH03-1 Hyperfast Rectifier, 8 A FRED PtTM Vishay High Power Products ORDERING INFORMATION TABLE Device code 8 E T H 03 S TRL - 1 2 3 4 5 6 7 8 1 - Current rating (8 A) 2 - E = Single diode 3 - T = TO-220, D 2PAK 4 - H = Hyperfast rectifier 5 - Voltage rating (03 = 300 V) 6 - S = D2PAK 7 - None = Tube (50 pieces) -1 = TO-262 TRL = Tape and reel (left oriented, for D 2PAK package) TRR = Tape and reel (right oriented, for D 2PAK package) 8 - None = Standard production PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95014 Part marking information http://www.vishay.com/doc?95008 Packaging information http://www.vishay.com/doc?95032 www.vishay.com 6 For technical questions, contact: diodes-tech@vishay.com Document Number: 93933 Revision: 08-Sep-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1