VS-8ETL06FP-N3

VS-8ETL06FP-N3 www.vishay.com Vishay Semiconductors Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 8 A FRED Pt® FEATURES • Hyperfast recovery time • Benchmark ultralow forward voltage drop • 175 °C operating junction temperature • Low leakage current 1 • Fully isolated package (VINS = 2500 VRMS) 2 • UL pending 2L TO-220 FullPAK • Designed and qualified according to JEDEC®-JESD 47 1 Cathode • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 2 Anode DESCRIPTION VS-8ETL06FP-N3 State of the art, ultralow VF, soft-switching hyperfast rectifiers optimized for Discontinuous (Critical) Mode (DCM) Power Factor Correction (PFC). PRIMARY CHARACTERISTICS IF(AV) The minimized conduction loss, optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. 8A VR 600 V VF at IF 0.81 V trr typ. 60 ns TJ max. 175 °C Package 2L TO-220 FullPAK Circuit configuration Single The device is also intended for use as a freewheeling diode in power supplies and other power switching applications. APPLICATIONS AC/DC SMPS 70 W to 400 W e.g. laptop and printer AC adaptors, desktop PC, TV and monitor, games units and DVD AC/DC power supplies. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS Repetitive peak reverse voltage VRRM Average rectified forward current IF(AV) TC = 142 °C Non-repetitive peak surge current IFSM TJ = 25 °C Repetitive peak forward current Operating junction and storage temperatures VALUES UNITS 600 V 8 A 175 IFM 16 TJ, TStg -65 to +175 °C ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage SYMBOL VBR, VR TEST CONDITIONS MIN. TYP. MAX. 600 - - IF = 8 A - 0.96 1.05 IF = 8 A, TJ = 150 °C - 0.81 0.86 VR = VR rated - 0.05 5 TJ = 150 °C, VR = VR rated - 20 100 IR = 100 μA UNITS V Forward voltage VF Reverse leakage current IR Junction capacitance CT VR = 600 V - 17 - pF Series inductance LS Measured lead to lead 5 mm from package body - 8.0 - nH μA Revision: 26-Oct-17 Document Number: 96430 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8ETL06FP-N3 www.vishay.com Vishay Semiconductors DYNAMIC RECOVERY CHARACTERISTICS (TC = 25 °C unless otherwise specified) PARAMETER SYMBOL Reverse recovery time trr MIN. TYP. MAX. IF = 1 A, dIF/dt = 100 A/μs, VR = 30 V TEST CONDITIONS - 60 100 IF = 8 A, dIF/dt = 100 A/μs, VR = 30 V - 150 250 TJ = 25 °C - 170 - - 250 - - 15 - - 20 - TJ = 125 °C Peak recovery current IF = 8 A dIF/dt = 200 A/μs VR = 390 V TJ = 25 °C IRRM TJ = 125 °C UNITS ns A TJ = 25 °C - 1.3 - TJ = 125 °C - 2.6 - MIN. TYP. MAX. UNITS TJ, TStg -65 - 175 °C Thermal resistance, junction-to-case RthJC - 3.4 4.3 °C/W Thermal resistance, junction-to-ambient per leg RthJA Typical socket mount - - 70 Thermal resistance, case-to-heatsink RthCS Mounting surface, flat, smooth, and greased - 0.5 - - 2.0 - g - 0.07 - oz. 6.0 (5.0) - 12 (10) kgf · cm (lbf · in) Reverse recovery charge Qrr μC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TEST CONDITIONS Weight Mounting torque Case style 2L TO-220 FullPAK 100 8ETL06FP 100 TJ = 175 °C IR - Reverse Current (µA) IF - Instantaneous Forward Current (A) Marking device 10 TJ = 175 °C TJ = 150 °C TJ = 25 °C 1 0.1 0.4 0.8 1.2 1.6 2.0 TJ = 150 °C 10 TJ = 125 °C TJ = 100 °C 1 TJ = 75 °C 0.1 TJ = 50 °C TJ = 25 °C 0.01 0.001 100 200 300 400 500 600 VF - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage Revision: 26-Oct-17 Document Number: 96430 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8ETL06FP-N3 www.vishay.com Vishay Semiconductors CT - Junction Capacitance (pF) 100 TJ = 25 °C 10 100 0 200 300 400 500 600 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 PDM D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 0.01 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.1 10 1 . 100 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics 12 RMS limit Average Power Loss (W) Allowable Case Temperature (°C) 180 160 DC 140 Square wave (D = 0.50) Rated VR applied 120 100 10 8 D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 6 4 2 DC See note (1) 80 0 0 2 4 6 8 10 12 14 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current 0 2 4 6 8 10 12 IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 5);  PdREV = inverse power loss = VR1 x IR (1 - D); IR at VR1 = rated VR Revision: 26-Oct-17 Document Number: 96430 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8ETL06FP-N3 www.vishay.com Vishay Semiconductors 450 5000 VR = 390 V TJ = 125 °C TJ = 25 °C 400 350 4000 3500 Qrr (nC) trr (ns) 300 250 200 3000 2500 150 2000 1500 100 50 0 100 IF = 16 A IF = 8 A 4500 IF = 16 A IF = 8 A VR = 390 V TJ = 125 °C TJ = 25 °C 1000 500 100 1000 1000 dIF/dt (A/µs) dIF/dt (A/µs) Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt Fig. 8 - Typical Stored Charge vs. dIF/dt (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM di(rec)M/dt (5) 0.75 IRRM (1) diF/dt (1) diF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) di(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 9 - Reverse Recovery Waveform and Definitions Revision: 26-Oct-17 Document Number: 96430 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8ETL06FP-N3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 8 E T L 06 FP -N3 1 2 3 4 5 6 7 8 1 - Vishay Semiconductors product 2 - Current rating (8 = 8 A) 3 - E = single 4 - T = TO-220, D2PAK (TO-263AB) 5 - L = ultralow VF hyperfast recovery 6 - Voltage rating (06 = 600 V) 7 - FP = 2L TO-220 FullPAK 8 - Environmental digit: -N3 = halogen-free, RoHS-compliant, and totally lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION VS-8ETL06FP-N3 50 1000 Antistatic plastic tube LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?96157 Part marking information www.vishay.com/doc?95392 SPICE model www.vishay.com/doc?96054 Revision: 26-Oct-17 Document Number: 96430 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors 2L TO-220 FullPAK DIMENSIONS in millimeters 3.40 Hole Ø 3.10 10.6 10.0 3.7 3.2 2.80 2.44 7.31 6.50 16.0 15.8 Mold flash bleeding 3.3 3.1 Exposed Cu 13.56 12.90 2.54 TYP. 0.61 0.38 0.9 0.7 2.85 2.65 1.20 1.47 1.30 1.05 2.54 TYP. Bottom view R 0.7 (2 places) R 0.5 4.8 4.6 5° ± 0.5° 5° ± 0.5° Revision: 06-Jul-17 Document Number: 96157 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-8ETL06FP-N3