VS-95PF(R)...(W) High Voltage Series
www.vishay.com
Vishay Semiconductors
Standard Recovery Diodes
Generation 2 DO-5 (DO-203AB) (Stud Version), 95 A
FEATURES
95PF(R)...
95PF(R)...W
• High surge current capability
• Designed for a wide range of applications
• Stud cathode and stud anode version
• Wire version available
• Low thermal resistance
• Designed and qualified for multiple level
DO-5 (DO-203AB)
DO-5 (DO-203AB)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
• Converters
PRIMARY CHARACTERISTICS
IF(AV)
95 A
Package
DO-5 (DO-203AB)
Circuit configuration
Single
• Power supplies
• Machine tool controls
• Welding
• Any high voltage input rectification bridge
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER
TEST CONDITIONS
IF(AV)
I2t
VRRM
UNITS
95
A
TC
128
°C
149
A
50 Hz
1700
60 Hz
1800
50 Hz
14 500
60 Hz
13 500
Range
1400 to 1600
V
-55 to +150
°C
IRRM MAXIMUM
AT TJ = 150 °C
mA
IF(RMS)
IFSM
VALUES
TJ
A
A2s
ELECTRICAL SPECIFICATIONS
VOLTAGE RATINGS
TYPE
NUMBER
VS-95PF(R)...(W)
VOLTAGE
CODE
VRRM, MAXIMUM REPETITIVE
PEAK REVERSE VOLTAGE
V
VRSM, MAXIMUM NON-REPETITIVE
PEAK REVERSE VOLTAGE
V
140
1400
1650
160
1600
1900
4.5
Revision: 11-Jan-18
Document Number: 93533
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-95PF(R)...(W) High Voltage Series
www.vishay.com
Vishay Semiconductors
FORWARD CONDUCTION
PARAMETER
SYMBOL
Maximum average forward current
at case temperature
Maximum RMS forward current
IF(AV)
TEST CONDITIONS
180° conduction, half sine wave
IF(RMS)
t = 10 ms
Maximum peak, one cycle forward,
non-repetitive surge current
IFSM
t = 10 ms
Maximum
I2t
for fusing
No voltage
reapplied
t = 8.3 ms
t = 10 ms
Maximum
I2t
for fusing
Low level value of threshold voltage
Low level value of forward
slope resistance
Maximum forward voltage drop
°C
149
A
1450
Sinusoidal half wave,
initial TJ = 150 °C
A
1500
14 500
13 500
10 500
100 % VRRM
reapplied
t = 8.3 ms
I2t
A
128
1800
100 % VRRM
reapplied
t = 8.3 ms
UNITS
95
1700
No voltage
reapplied
t = 8.3 ms
t = 10 ms
I2t
VALUES
A2s
9400
t = 0.1 ms to 10 ms, no voltage reapplied
145 000
A2s
VF(TO)
(16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum
0.73
V
rf
(16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum
2.4
m
VFM
Ipk = 267 A, TJ = 25 °C, tp = 400 μs rectangular wave
1.40
V
VALUES
UNITS
-55 to +150
°C
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum junction and storage
temperature range
TEST CONDITIONS
TJ, TStg
Maximum thermal resistance,
junction to case
RthJC
DC operation
0.27
Thermal resistance,
case to heatsink
RthCS
Mounting surface, smooth, flat and greased
0.25
Not lubricated thread, tighting on nut (1)
3.4
(30)
Lubricated thread, tighting on nut (1)
2.3
(20)
K/W
Maximum allowable
mounting torque (+ 0 %, - 10 %)
Not lubricated thread, tighting on hexagon
4.2
(37)
(2)
3.2
(28)
Lubricated thread, tighting on hexagon (2)
Approximate weight
Case style
N·m
(lbf · in)
See dimensions - link at the end of datasheet
15.8
g
0.56
oz.
DO-5 (DO-203AB)
Notes
(1) Recommended for pass-through holes
(2) Torque must be applicable only to hexagon and not to plastic structure, recommended for holed heatsink
RthJC CONDUCTION
CONDUCTION ANGLE
SINUSOIDAL CONDUCTION
RECTANGULAR CONDUCTION
180°
0.14
0.10
120°
0.16
0.17
90°
0.21
0.22
60°
0.30
0.31
30°
0.50
0.50
TEST CONDITIONS
UNITS
TJ = TJ maximum
K/W
Note
• The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC
Revision: 11-Jan-18
Document Number: 93533
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-95PF(R)...(W) High Voltage Series
www.vishay.com
Vishay Semiconductors
1800
95PF(R) Series
140 to 160
RthJC = 0.27 K/W
150
Maximum Non Repetitive Surge Current
Versus Pulse Train Duration.
Initial Tj = Tj Max.
No Voltage Reapplied
1400
Rated Vrrm Reapplied
Peak Half Sine Wave Forward Current (A)
Maximum Allowable Case Temperature (°C)
160
140
180° Sine
130
120
1600
1200
1000
800
600
400
140 to 160
110
0
95PF(R) Series
Series
85HF(R)
200
0.01
10 20 30 40 50 60 70 80 90 100
Fig. 1 - Current Ratings Characteristics
1000
At Any Rated Load Condition And With
Rated Vrrm Applied Following Surge.
Initial Tj = Tj Max.
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
1400
1200
1000
800
600
1
Fig. 3 - Maximum Non-Repetitive Surge Current
Instantaneous Forward Current (A)
Peak Half Sine Wave Forward Current (A)
1600
0.1
Pulse Train Duration (s)
Average Forward Current (A)
95PF(R)
85HF(R) Series
Series
140 to 160
Tj = Tj Max
100
Tj = 25°C
10
95PF(R)
85HF (R)Series
Series
140 to 160
400
1
1
10
100
0
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 2 - Maximum Non-Repetitive Surge Current
1
1.5
2
2.5
Fig. 4 - Forward Voltage Drop Characteristics
(K/W)
1
Steady State Value
RthJC = 0.27 K/W
(DC Operation)
thJC
Transient Thermal Impedance Z
0.5
Instantaneous Forward Voltage (V)
0.1
95PF(R)
95PF(R) Series
Series
140 to 160
0.01
0.0001 0.001
0.01
0.1
1
10
Square Wave Pulse Duration (s)
Fig. 5 - Thermal Impedance ZthJC Characteristics
Revision: 11-Jan-18
Document Number: 93533
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-95PF(R)...(W) High Voltage Series
www.vishay.com
Vishay Semiconductors
ORDERING INFORMATION TABLE
Device code
VS-
95
PF
R
160
W
1
2
3
4
5
6
1
-
Vishay Semiconductors product
2
-
95 = standard device
3
-
PF = plastic package
4
-
None = stud normal polarity (cathode to stud)
R = stud reverse polarity (anode to stud)
5
-
6
-
Voltage code x 10 = VRRM (see Voltage Ratings table)
None = standard terminal
(see dimensions for 95PF(R)... - link at the end of datasheet)
W = wire terminal
(see dimensions for 95PF(R)...W - link at the end of datasheet)
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95345
Revision: 11-Jan-18
Document Number: 93533
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
www.vishay.com
Vishay Semiconductors
DO-203AB (DO-5) for 50PF(R)...(W), 80PF(R)...(W),
and 95PF(R)...(W) Series
DIMENSIONS FOR 80PF(R), 50PF(R), AND 95PF(R) SERIES in millimeters
6.45 MIN.
Ø3
4.2 MAX.
1.2 MAX.
3.5 MIN.
4 MIN.
Plastic cap.
25.4 MAX.
11.45 MAX.
2.4 REF.
11 ± 0.4
1/4"28-UNF-2A
17.25 MAX.
Ø 15.95 MAX.
Ø 17.15 MAX.
18.9
+ 0.1
0.0
Revision: 20-Apr-16
Document Number: 95345
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
www.vishay.com
Vishay Semiconductors
DIMENSIONS FOR 80PF(R)...(W), 50PF(R)...(W), AND 95PF(R)...(W) SERIES in millimeters
2.05 MAX.
Plastic cap.
25.4 MAX.
11.45 MAX.
2.4 REF.
11 ± 0.4
1/4"-28-UNF-2A
17.25 MAX.
Ø 15.95 MAX.
Ø 17.15 MAX.
18.9
+ 0.1
0.0
Revision: 20-Apr-16
Document Number: 95345
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
www.vishay.com
Vishay Semiconductors
DIMENSIONS FOR 52PF(R), 82PF(R), AND 97PF(R) SERIES in millimeters
11.20 - 12.20
Ø 6.80 - 7.00
6.6 mm2 external lead with
blue or red sleeve insulation
115.00 - 123.00
127.40 - 134.40
Plastic cap.
11.05 - 11.45
2.4 REF.
10.60 - 11.40
1/4"-28-UNF-2A
Revision: 20-Apr-16
Document Number: 95345
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000