VS-E5TX1206FP-N3

VS-E5TX1206FP-N3 www.vishay.com Vishay Semiconductors Hyperfast Rectifier, 12 A FRED Pt® G5 FEATURES • Best in class forward voltage drop and switching losses trade off • Optimized for high speed operation 2 Anode 1 Cathode 1 • 175 °C maximum operating junction temperature • Polyimide passivation 2 • Fully isolated package (VINS =2500 VRMS) TO-220 FullPAK 2L • True 2 pin package • Designed and qualified according to JEDEC® - JESD 47 LINKS TO ADDITIONAL RESOURCES • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 3D 3D 3D Models Application Notes DESCRIPTION / APPLICATIONS Featuring a unique combination of low conduction and switching losses, this rectifier is the right choice for soft switched and resonant converters, as well as medium frequency hard switching converters. This device is specifically designed to improve as output rectifier for DC/DC stage in resonant converters and as PFC rectifier for aircon and industrial power supplies. PRIMARY CHARACTERISTICS IF(AV) 12 A VR 600 V VF at IF at 125 °C 1.36 V trr (typ.) 17 ns TJ max. 175 °C Package TO-220 FullPAK 2L Circuit configuration Single MECHANICAL DATA Case: TO-220 FullPAK 2L Molding compound meets UL 94 V-0 flammability rating Terminals: J-STD-002 matte tin plated leads, solderable per ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS 600 V Repetitive peak reverse voltage VRRM Average rectified forward current in DC IF(AV) TC = 110 °C, DC 12 Non-repetitive peak surge current IFSM TC = 25 °C, tp = 10 ms, sine wave 155 Operating junction and storage temperature TJ, TStg A -55 to +175 °C ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage Forward voltage SYMBOL VBR, VR VF TEST CONDITIONS MIN. TYP. MAX. 600 - - IF = 12 A - 1.66 2.23 IR = 100 μA IF = 12 A, TJ = 125 °C - 1.36 - VR = VR rated - - 10 TJ = 125 °C, VR = VR rated - - 500 UNITS V Reverse leakage current IR Junction capacitance CT VR = 600 V - 10 - pF Series inductance LS Measured to lead 5 mm from package body - 8 - nH μA Revision: 07-Jun-2022 Document Number: 96974 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-E5TX1206FP-N3 www.vishay.com Vishay Semiconductors DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER Reverse recovery time Peak recovery current SYMBOL trr IRRM Reverse recovery charge Qrr Reverse recovery time trr Peak recovery current IRRM Reverse recovery charge Qrr TEST CONDITIONS MIN. TYP. MAX. IF = 1.0 A,dIF/dt = 100 A/μs, VR = 30 V - 17 - TJ = 25 °C - 26 - TJ = 125 °C - 37 - - 11 - - 17 - TJ = 25 °C TJ = 125 °C IF = 8 A dIF/dt = 1000 A/μs VR = 400 V TJ = 25 °C - 130 - TJ = 125 °C - 380 - TJ = 25 °C - 29 - TJ = 125 °C - 43 - - 12 - - 18 - TJ = 25 °C TJ = 125 °C IF = 12 A dIF/dt = 1000 A/μs VR = 400 V UNITS ns A nC ns A TJ = 25 °C - 150 - TJ = 125 °C - 480 - MIN. TYP. MAX. UNITS - - 3.5 °C/W - 2.0 - g 6.0 (5.0) - 12 (10) kgf · cm (lbf · in) -55 - 175 °C nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Thermal resistance, junction-to-case SYMBOL TEST CONDITIONS RthJC Weight Mounting torque Maximum junction and storage temperature range Marking device TJ, TStg Case style TO-220 FullPAK 2L E5TX1206FP Revision: 07-Jun-2022 Document Number: 96974 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-E5TX1206FP-N3 Vishay Semiconductors 100 100 CT - Junction Capacitance (pF) IF - Instantaneous Forward Current (A) www.vishay.com TJ = 175 °C 10 1 TJ = 125 °C TJ = 25 °C TJ = -40 °C 10 0.1 0 0.5 1.0 1.5 2.0 2.5 1 3.0 0 100 VF - Forward Voltage Drop (V) Allowable Solder Pad Temperature (°C) IR - Reverse Current (µA) TJ = 175 °C TJ = 125 °C 1 TJ = 25 °C 0.1 0.01 0.001 0 100 200 300 400 400 500 600 Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 1000 10 300 VR - Reverse Voltage (V) Fig. 1 - Forward Voltage Drop Characteristics 100 200 500 600 180 170 160 150 DC 140 130 120 110 100 Square wave (D = 0.50) rated VR applied 90 80 0 2 VR - Reverse Voltage (V) 4 6 8 10 12 14 IF(AV) - Average Forward Current (A) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage Fig. 4 - Maximum Allowable Case Temperature vs. Average Forward Current 30 Average Power Loss (W) RMS limit 25 20 D = 0.01 D = 0.05 D = 0.10 D = 0.20 D = 0.50 DC 15 10 5 0 0 2 4 6 8 10 12 14 16 18 IF(AV) - Average Forward Current (A) Fig. 5 - Forward Power Loss Characteristics Revision: 07-Jun-2022 Document Number: 96974 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-E5TX1206FP-N3 www.vishay.com Vishay Semiconductors ZthJC - Thermal Impedance Junction to Case (°C/W) 10 1 0.50 0.20 0.10 0.05 0.02 0.01 DC 0.1 0.00001 0.0001 0.001 0.01 0.1 1 10 100 t1 - Rectangular Pulse Duration (s) Fig. 6 - Transient Thermal Impedance, Junction to Case 110 22 100 20 90 IF = 24 A IF = 24 A 16 IF = 12 A Irr (A) 70 trr (ns) VR = 400 V 18 80 60 50 TJ = 125 °C IF = 6 A IF = 12 A 14 12 10 40 30 8 20 6 TJ = 125 °C, VR = 400 V IF = 6 A 4 10 100 1000 100 1000 dIF/dt (A/µs) dIF/dt (A/µs) Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt Fig. 9 - Typical Reverse Recovery Current vs. dIF/dt 200 700 IF = 12 A, VR = 400 V, low dI/dt TJ = 125 °C VR = 400 V 600 175 IF = 24 A 125 IF = 12 A 500 trr (ns) Qrr (nC) 150 400 125 °C 25 °C 100 75 IF = 6 A 50 300 In this dI/dt range curves are not dependent from applied IF switching current, from 0.5 to 2 times IF(AV) rating 25 200 0 100 1000 10 100 dIF/dt (A/µs) dIF/dt (A/µs) Fig. 8 - Typical Reverse Recovery Charge vs. dIF/dt Fig. 10 - Typical Reverse Recovery Time vs. dIF/dt Revision: 07-Jun-2022 Document Number: 96974 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-E5TX1206FP-N3 www.vishay.com Vishay Semiconductors 250 200 5 In this dI/dt range curves are not dependent from applied IF switching current, from 0.5 to 2 times IF(AV) rating In this dI/dt range curves are not dependent from applied IF switching current, from 0.5 to 2 times IF(AV) rating 4.5 4 150 Irr (A) Qrr (nC) 3.5 125 °C 100 IF = 12 A, VR = 400 V, low dI/dt 3 2.5 125 °C 2 IF = 12 A, VR = 400 V, low dI/dt 1.5 50 25 °C 1 25 °C 0.5 0 10 0 100 10 100 dIF/dt (A/µs) dIF/dt (A/µs) Fig. 11 - Typical Reverse Recovery Charge vs. dIF/dt Fig. 12 - Typical Reverse Recovery Current vs. dIF/dt (3) trr ta IF 0 tb t0 t10 % 0.1 IRRM (2) IRRM Qrr (4) di(rec)M/dt (5) (1) diF/dt Fig. 13 - Reverse Recovery Waveform and Definitions Notes (1) di /dt - rate of change of current through zero crossing F (2) I RRM - peak reverse recovery current (3) t - reverse recovery time measured from t , crossing point of negative going I , to point t rr 0 F 10%, 0.1 IRRM (4) Q - area under curve defined by t and t rr 0 10 % t 10 % Q rr =  I ( t ) dt t0 (5) di(rec)M/dt - peak rate of change of current during tb portion of trr Revision: 07-Jun-2022 Document Number: 96974 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-E5TX1206FP-N3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- E 5 T X 12 06 FP -N3 1 2 3 4 5 6 7 8 9 1 - Vishay Semiconductors product 2 - E = single diode 3 - 5 = FRED generation 5 4 - 4 5 - Package: T = TO-220 package X = hyperfast recovery 6 - Current rating (12 = 12 A) 7 - Voltage rating (06 = 600 V) 8 - FP = TO-220 FullPAK 2L Environmental digit: N3 = halogen-free, RoHS-compliant, and totally lead (Pb)-free 9 ORDERING INFORMATION (Example) PREFERRED P/N VS-E5TX1206FP-N3 QUANTITY PER TUBE MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION 50 1000 Antistatic plastic tube LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?96157 Part marking information www.vishay.com/doc?95392 Revision: 07-Jun-2022 Document Number: 96974 6 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors 2L TO-220 FullPAK DIMENSIONS in millimeters 3.40 Hole Ø 3.10 10.6 10.0 3.7 3.2 2.80 2.44 7.31 6.50 16.0 15.8 Mold flash bleeding 3.3 3.1 Exposed Cu 13.56 12.90 2.54 TYP. 0.61 0.38 0.9 0.7 2.85 2.65 1.20 1.47 1.30 1.05 2.54 TYP. Bottom view R 0.7 (2 places) R 0.5 4.8 4.6 5° ± 0.5° 5° ± 0.5° Revision: 06-Jul-17 Document Number: 96157 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000