Packaging Information
www.vishay.com
Vishay General Semiconductor
Packaging Information
PACKAGING ORDERING CODE
ANTI-STATIC
PREFERRED
PACKAGE CODE PACKAGE CODE
51, A
PACKAGING DESCRIPTION
Bulk
52, 52T
P
SMB (DO-214AA) /SMBG (DO-215AA), 12 mm tape, 7" diameter plastic reel
2D
P
SM5-8A (DO-218AB), 24 mm tape, 13" diameter plastic reel, anode towards sprocket hole
2E, K
SM5-8A (DO-218AB), 24 mm tape, 13" diameter plastic reel, cathode towards sprocket hole
2M, P
Tube packaging for 5KP/6KA type lead formed components
53, B
26 mm horizontal taping and ammo box packaging
54, C
P
52.4 mm horizontal tape, 13" diameter paper reel
5A, 5AT
P
SMA (DO-214AC), 12 mm tape, 13" diameter plastic reel
5B, 5BT
P
SMB (DO-214AA) / SMBG (DO-215AA), 12 mm tape, 13" diameter plastic reel
5CA
P
GF1 (DO-214BA), 12 mm tape, 13" diameter plastic reel
57, 57T
P
SMC (DO-214AB) / SMCG (DO-215AB), 16 mm tape, 7" diameter plastic reel
6A
P
SlimSMA (DO-221AC), 12 mm tape, 7" diameter plastic reel
6B
P
SlimSMA (DO-221AC), 12 mm tape, 13" diameter plastic reel
9A, 9AT
P
SMC (DO-214AB) / SMCG (DO-215AB), 16 mm tape, 13" diameter plastic reel
61, 61T
P
SMA (DO-214AC), 12 mm tape, 7" diameter plastic reel
67A
P
GF1 (DO-214BA), 12 mm tape, 7" diameter plastic reel
72, E
P
Bulk pack for bridge and special axial-leaded formed devices
73, D
52.4 mm horizontal tape and ammo box packaging
77
P
DFS bridge, 16 mm tape, 13" diameter paper reel
80
P
MB-S (TO-269AA) bridge, 12 mm tape, 13" diameter paper reel
81
P
D2PAK (TO-263AB) 24 mm tape, 13" diameter reinforced hub plastic reel
8W
P
D2PAK (TO-263AB) (wire bond) 24 mm tape, 13" diameter reinforced hub plastic reel
83
P
GL34 (DO-213AA) 8 mm tape, 13" diameter plastic reel
84A
P
SMP (DO-220AA) 12 mm tape, 7" diameter plastic reel
85A
P
SMP (DO-220AA) 12 mm tape, 13" diameter plastic reel
86A
P
SMPC (TO-277A), 12 mm tape, 7" diameter plastic reel
87A
P
SMPC (TO-277A), 12 mm tape, 13" diameter plastic reel
89A
P
MicroSMP (DO-219AD), 8 mm tape, 7" diameter plastic reel
45, P
P
Anti-static tube packaging for Bridge and Power Pack
4W, P
P
Anti-static tube packaging for wire bond TO-220, ITO-220, TO-262 and TO-263
96
P
GL41 (DO-213AB), 12 mm tape, 7" diameter plastic reel
97
P
GL41 (DO-213AB), 12 mm tape, 13" diameter plastic reel
98
P
100, V
GL34 (DO-213AA), 8 mm tape, 7" diameter plastic reel
MPG06 pseudo radial tape, cathode first out of ammo pack
H
P
Tape in 7" diameter plastic reel
I
P
Tape in 13" diameter plastic reel
TR
P
SMA (DO-214AC), 12 mm tape, 7" diameter plastic reel (1)
TR3
P
SMA (DO-214AC), 12 mm tape, 13" diameter plastic reel (1)
Notes
• “P” and bold letter denotes preferred package code
• A “T” suffix added to the packaging codes for SMA, SMB and SMC products indicates that the patented folded-frame construction is used.
This does not apply to TR and TR3 codes or TRANSZORB® TVS in SMA and SMB
(1) Formerly sold by Vishay Telefunken® (Telefunken® is a registered trademark of Electro Holding GmbH)
Revision: 12-Nov-2019
Document Number: 88869
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Packaging Information
www.vishay.com
Vishay General Semiconductor
BULK PACKAGING
PREFERRED
PACKAGE
CODE
PACKAGING
DF-M, DF-S, DFL-S
45
GSIB-5S, PB
CASE TYPES
BOX SIZE
QUANTITY
INCHES
cm
EA.
Anti-static plastic tubes
17.4 length
44.1 length
50
45
Anti-static plastic tubes
24.2 length
61.5 length
20
GBU, BU
45
Anti-static plastic tubes
18.5 length
47 length
20
GBL
45
Anti-static plastic tubes
17.5 length
44.5 length
20
45, 4W
Anti-static plastic tubes
21.0 length
53.7 length
50
TO-247AD
45
Anti-static plastic tubes
20.0 length
50.8 length
30
MBS (TO-269AA)
45
Anti-static plastic tubes
20.3 x 0.41
51.5 x 1.04
100
GBL
51
Anti-static PVC tray
12.5 x 6.1 x 1.0
31.7 x 15.5 x 2.5
400
GBPC12-35W
51
Paper box
12.5 x 12.5 x 1.7
31.7 x 31.7 x 4.3
100
GBPC6
51
Paper box
7.5 x 7.5 x 1.43
19.0 x 19.0 x 3.6
100
KBL
51
Anti-static PVC tray
12.2 x 6.1 x 1.5
30.9 x 15.5 x 3.8
300
GBPC12-35
51
Paper box
12.5 x 12.5 x 1.7
31.7 x 31.7 x 4.3
100
KBU4, 6, 8
51
Anti-static PVC tray
12.2 x 6.1 x 1.5
30.9 x 15.5 x 3.8
250
WOG, 2WOG
51
Plastic bags
-
-
100
GBU / BU
51
Paper tray
13.1 x 6.6 x 1.2
33.2 x 16.8 x 3.0
250
TO-220AB / AC, ITO-220AC / AB, TO-262AA
Revision: 12-Nov-2019
Document Number: 88869
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Packaging Information
www.vishay.com
Vishay General Semiconductor
AXIAL-LEADED TAPE AND REEL PACKAGING
Inspection hole
(both sides)
A
C
Ammo pack can be opened on either side,
depending on desired device polarity
B
All axial-leaded devices are packed in accordance with EIA standard RS-296-E. The diagrams given below refer to these
specifications.
TABLE 1 - AMMO PACK PACKAGING
AVAILABLE PRODUCT
OUTLINES
PACKAGING
PREFERRED
DIMENSION DIMENSION DIMENSION QUANTITY
PACKAGE CODE
A
B
C
BOX
26 mm horizontal tape,
ammo pack
DO-41(DO-204AL), MPG06
DO-15 (DO-204AC)
P300
53, B
53, B
53, B
9.7"
(247 mm)
1.7"
(44 mm)
3.7"
(95 mm)
3.0K
1.5K
0.75K
52 mm horizontal tape,
ammo pack
DO-41(DO-204AL), MPG06
DO-15 (DO-204AC)
DO-201AD, GP20
P600
73, D
73, D
73, D
73, D
10.0"
(255 mm)
3.15"
(80 mm)
4.53"
(115 mm)
3.0K
2.0K
1.0K
0.3K
MPG06
100, V
13.4"
(340 mm)
1.8"
(47 mm)
7.9"
(200 mm)
2.0K
Pseudo / radial tape,
ammo pack
|D1 - D2| = 1.4 (0.055) Max. 0.8 (0.031) Max. Typ. 0.0
D1
D2
K
C
S
A
0.8 (0.031)
Max.
E
P
E
D Dia.
(Table 2)
Anode Lead
White Tape
B
6.0 ± 0.4
T
(0.236 ± 0.0157)
W
Dimensions A, M, K, P, S and T apply to both sides
Dimensions in millimeters (inches)
Description
Symbol
Component Pitch
A
2, 3
Inside Tape Spacing
B
2, 3
Lead to Lead Eccentricity
|D1 - D2|
Lead Extension
K
Lead Bending
E
2
Cumulative Pitch
P
3
Exposed Adhesive
S
Tape Width
T
All polarized components shall be oriented in the same direction
Fig. 1
91.9 (3.62) Dia.
50.8 (2.00) Dia.
38.1 (1.50) Dia.
14.3 (0.56) Dia.
Kraft
Paper
Cathode Lead
Colored Tape
The “C” dimension of Fig. 2 is between flanges of the component
reel and shall be 1.5 mm (0.059") to 8.00 mm (0.315") greater than
the overall taped component width “W” (Fig. 1). Where “W”
dimension is 68.2 mm (2.68") max.
Fig. 2
Revision: 12-Nov-2019
Document Number: 88869
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Packaging Information
www.vishay.com
Vishay General Semiconductor
AXIAL-LEADED TAPE AND REEL PACKAGING
TABLE 2 - REEL AND AMMO PACK TAPING SPECIFICATIONS
COMPONENT
PITCH
“A” Fig. 1
INSIDE TAPE
SPACING “B”
Fig. 1
PREFERRED
PACKAGE
CODE
UNITS
PER REEL
EA.
INCHES
mm
INCHES
DO-15 (DO-204AC)
54, C
4000
0.200
5.0
2.06
DO-201AD
54, C
1400
0.395
10.0
2.06
52.4
DO-41 (DO-204AL)
54, C
5500
0.200
5.0
2.06
52.4
DFS Surface-Mount
77
1500
-
-
GF1 (DO-214BA)
67A, H / 5CA, I
1500 / 6500
-
-
GL34 (DO-213AA)
98, H / 83, I
2500 / 9000
-
COMPONENT
CASE TYPE
GL41 (DO-213AB)
Fig. 8
REEL DIMENSION
“D” Fig. 2
LEAD BENDING
“E” Fig. 1
mm
INCHES
mm
INCHES
52.4
13.0
330
0.047
1.2
13.0
330
0.047
1.2
13.0
330
0.047
1.2
13.0
330
Fig. 8
-
7.0 / 13.0
178 / 330
Fig. 8
-
-
7.0 / 13.0
178 / 330
Fig. 8
-
-
-
7.0 / 13.0
178 / 330
Fig. 8
-
-
-
13.0
330
0.079
2.0
mm
96, H / 97, I
1500 / 5000
Fig. 5 and Fig. 6
2500
0.500
GP10E
54, C
5500
0.200
5.0
2.06
52.4
13.0
330
0.047
1.2
GP20/1.5KE
54, C
1400
0.395
10.0
2.06
52.4
13.0
330
0.047
1.2
MPG06
54, C
5500
0.200
5.0
2.06
52.4
13.0
330
0.047
1.2
P600
54, C
800
0.395
10.0
2.06
52.4
13.0
330
0.047
1.2
GP10E Radial
12.7
SMP (DO-220AA)
84A, H / 85A, I
3000 / 10 000
-
-
7.0 / 13.0
178 / 330
Fig. 8
-
SMF (DO-219AB)
H/I
3000 / 10 000
-
-
7.0 / 13.0
178 / 300
Fig. 8
-
I
2000 / 14 000
-
-
13.0
330
Fig. 8
-
89A / H
4500
-
-
7.0
178
Fig. 8
-
SMPC (TO-277A)
86A, H / 87A, I
1500 / 6500
-
-
7.0 / 13.0
178 / 330
Fig. 8
-
SMA (DO-214AC)
61, 61T, TR, H /
5A, 5AT, TR3, I
1800 / 7500
-
-
7.0 / 13.0
178 / 330
Fig. 8
-
SMB (DO-214AA) /
SMBG (DO-215AA)
52, 52T, H / 5B,
5BT, I
750 / 3200
-
-
7.0 / 13.0
178 / 330
Fig. 8
-
SMC (DO-214AB) /
SMCG (DO-215AB)
57, 57T, H / 9A,
9AT, I
850 / 3500
-
-
7.0 / 13.0
178 / 330
Fig. 8
-
2D / I
750
-
-
13.0
330
Fig. 8
-
81, 8W, I
800
-
-
13.0
330
Fig. 8
-
SMPD (TO-263AC) /
SMPA (DO-221BC)
MicroSMP (DO-219AD) /
MicroSMF (DO-219AC)
DO-218AB / AC
D2PAK (TO-263AB)
MBS (TO-269AA)
SlimSMA (DO-221AC)
SlimSMAW (DO-221AD)
SlimDPAK (TO-252AE)
FlatPAK 5 x 6
Fig. 8
80, I
3000
-
-
13.0
330
Fig. 8
-
6A, H / 6B, I
3500 / 14 000
-
-
7.0 / 13.0
178 / 330
Fig. 8
-
H, I
3500 / 14 000
-
-
7.0 / 13.0
178 / 330
Fig. 8
-
I
4500
-
-
13.0
330
Fig. 8
-
H/I
1500 / 6000
-
-
7.0 / 13.0
178 / 330
Fig. 8
-
MicroSMP (DO-219AD)
I
16 000
-
-
13.0
330
Fig. 8
-
SMPA (DO-221BC)
H
3500
-
-
7.0
178
Fig. 8
-
Note
• Package codes, 61/5A, 52/5B are matrix-frame constructions for TRANSZORB® TVS in SMA and SMB only
TABLE 3 - COMPONENT AND INSIDE HORIZONTAL TAPE SPACING
COMPONENT
BODY DIAMETER
COMPONENTS SPACING
A (LEAD TO LEAD)
INSIDE TAPE
SPACING “B”
0 mm to 5 mm
(0.0" to 0.197")
5.0 mm ± 0.5 mm
(0.197" ± 0.020")
26 mm + 1.5 mm / - 0.0 mm
(1.024" + 0.059" / - 0.0")
0 mm to 5 mm
(0.0" to 0.197")
5.0 mm ± 0.5 mm
(0.197" ± 0.020")
52.4 mm + 1.5 mm / - 0.4 mm
(2.062" + 0.059" / - 0.016")
5.01 mm to 10 mm
(0.197" to 0.394")
10 mm ± 0.5 mm
(0.394" ± 0.020")
52.4 mm + 1.5 mm / - 0.4 mm
(2.062" + 0.059" / - 0.016")
CUMULATIVE
PITCH TOLERANCE
Not to exceed 1.5 mm (0.059")
over 6 consecutive components
Revision: 12-Nov-2019
Document Number: 88869
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Packaging Information
www.vishay.com
Vishay General Semiconductor
DIMENSIONS in millimeters (inches)
1.0 MAX. (1)
(0.04)
2.54 (0.1)
2.29 (0.090)
Body DIA.
12.7 (0.50)
(Nominal)
0.66 (0.026)
0.55 (0.022)
Lead DIA.
(Center to Center)
3.2 (0.125)
2.9 (0.115)
± 1.0 (1)
(± 0.039)
1.0 (0.039) MAX.
16.0 (0.63)
MIN.
Tape
11.0
(0.433) 9.75 (0.384)
MAX. 8.50 (0.335)
3.06 (0.118)
MAX.
12.5
(0.492)
MIN.
0.6 (0.025)
0.4 (0.016)
19.0 (0.748)
17.5 (0.689)
2.0 (0.079)
MAX.
4.51 (0.178)
3.11 (0.122)
13.0 (0.51)
12.4 (0.49)
Note:
(1) Component Alignment
5.68 (0.224)
4.68 (0.184)
4.3 (0.169)
3.7 (0.146)
DIA.
User Direction Feed
Available only for MPG06 Product in Ammo Pack in Accordance with EIA Standard RS-468-A Utilizing
0.61 mm (0.024") Diameter Leads. Maximum Cumulative Pitch Tolerance: 1.0 mm (0.039")/20 Pitch.
Fig. 3 - Pseudo Radial
RADIAL TAPE PACKAGING
“C”
Arbor Hole DIA.
30 ± 5 ID
(1.181 ± 0.197)
Core DIA.
34.9 to 102
(1.37 to 4.02)
55 (2.17) MAX.
330 (13.0) MAX.
Fig. 4 - Reel Dimensions
Notes
• “C” dimension between the reel flanges shall be governed by the overall width of the taped components and shall be 1.5 mm (0.057") to
8.0 mm (0.315") greater than the overall width
• All leaded devices are packaged in accordance with EIA standard RS-468-A specification and are available on reel or in fan fold box (ammo
pack)
• All dimensions are in millimeters and (inches)
Revision: 12-Nov-2019
Document Number: 88869
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Packaging Information
www.vishay.com
Vishay General Semiconductor
SURFACE MOUNT TAPE AND REEL PACKAGING
Tape with
Components shall
Pass Around
Bending Radius
without Damage,
for Reels with Hub
Diameters
Approaching
Minimum
Dimension
Top Cover Tape
Thickness:
0.10 mm (0.004")
Max.
Bending
Radius
R Ref.
Fig. 6
Embossed Carrier
Tape
G
Component
Cavity
N
A
B
D
T
C
Fig. 5
Fig. 7
DIMENSIONS in millimeters (inches)
A
MAX.
B
MIN.
C
D
MIN.
N
MIN.
G
MAX.
T
MAX.
8 mm (0.315)
330 ± 2.0 (13.0 ± 0.079)
178 ± 2.0 (7.0 ± 0.079)
1.5 (0.059)
13.0 ± 0.20
(0.51 ± 0.008)
20.2 (0.795)
50 (1.97)
9.9 (0.389)
14.4 (0.567)
12 mm (0.472)
330 ± 2.0 (13.0 ± 0.079)
178 ± 2.0 (7.0 ± 0.079)
1.5 (0.059)
13.0 ± 0.20
(0.51 ± 0.008)
20.2 (0.795)
50 (1.97)
14.4 (0.567)
18.4 (0.724)
16 mm (0.630)
330 ± 2.0 (13.0 ± 0.079)
178 ± 2.0 (7.0 ± 0.079)
1.5 (0.059)
13.0 ± 0.20
(0.51 ± 0.008)
20.2 (0.795)
50 (1.97)
18.4 (0.724)
22.4 (0.802)
24 mm (0.945)
330 ± 2.0 (13.0 ± 0.079)
178 ± 2.0 (7.0 ± 0.079)
1.5 (0.059)
13.0 ± 0.20
(0.51 ± 0.008)
20.2 (0.795)
50 (1.97)
26.4 (1.039)
30.4 (1.197)
TAPE SIZE
Revision: 12-Nov-2019
Document Number: 88869
6
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Packaging Information
www.vishay.com
Vishay General Semiconductor
SURFACE MOUNT TAPE AND REEL PACKAGING
P0
De-Reeling Direction
10 Pitches Cumulative Tolerance on Tape ± 0.2
P2
T2
T
D0
E1
Top
Cover
Tape
A0 (2)
F
W
K0
B1 (1)
E2
B0
S1
T1
P1
Notes
(1) For machine reference only, including draft and
radii concentric around B0
(2)
D1 for components
2.0 mm x 1.2 mm and larger
See note 1 and table
TVS Polarization
DFS, DFLS, MBS,
Polarization
Rectifiers
Polarization
GL41, GL34, GF1, SMA,
SMB, SMC, SMP,
MicroSMP, SMPC,
SlimSMA, SMPA,
SlimSMAW, DO-218AB/2E
and K, MicroSMF, SMF
DO-218AB/2D and I
DO-218 AC / I
TO-263AB, TO-252,
SMPD, and SlimDPAK
FlatPAK 5 x 6
Pin 1 mark
Fig. 8
8 mm, 12 mm, 16 mm, AND 24 mm EMBOSSED TAPE in millimeters (inches)
TAPE SIZE
8 mm, 12 mm
16 mm, 24 mm
D0
1.5 ± 0.1
(0.059 ± 0.004)
E1
P0
P2
2.0 ± 0.05
(0.079 ± 0.002)
1.75 ± 0.1
4.0 ± 0.1
(0.069 ± 0.004) (0.157 ± 0.004)
2.0 ± 0.1
(0.079 ± 0.004)
A0, B0, K0
S1 MIN.
T MAX.
T1 MAX.
(1)
0.6
(0.024)
0.600
(0.024)
0.1
(0.004)
Revision: 12-Nov-2019
Document Number: 88869
7
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Packaging Information
www.vishay.com
Vishay General Semiconductor
DIMENSIONS in millimeters (inches)
CASE TYPE
TAPE SIZE B1 MAX. D1 MIN. E2 MIN.
GL34 (DO-213AA)
4.2
(0.165)
MicroSMP (DO-219AB) /
MicroSMF (DO-219AD)
3.28
(0.129)
8 (0.315)
SMF (DO-219AB)
F
P1
R REF.
6.25
(0.246)
1.0
(0.039)
-
6.05
(0.238)
T2 MAX.
2.4 (0.094)
3.5 ± 0.05
(0.138 ± 0.002)
20
(0.787)
1.919 (0.076)
1.8 (0.07)
4.0 ± 0.10
(0.157 ± 0.004)
GL34 (DO-213AA)
4.5 (0.177)
GF1 (DO-214BA)
3.25 (0.128)
8.2
(0.323)
SMA (DO-214AC)
SMP (DO-220AA)
7.0
(0.276)
SMB (DO-214AA) /
SMBG (DO-215AA)
8.2
(0.323)
5.5 ± 0.05
(0.217 ± 0.002)
16 (0.630)
24 (0.945)
SlimSMA (DO-221AC) /
SMPA (DO-221BC)
FlatPAK 5 x 6
12.3
(0.484)
2.77 (0.109)
2.64 (0.104)
SMPD (TO-263AC)
SlimSMAW (DO-221AD)
1.84 (0.072)
8.0 ± 0.10
(0.315 ± 0.004)
12.1
(0.476)
1.5
(0.059)
14.25
(0.561)
12 (0.472)
20.1
(0.791)
6.2
(0.244)
6.4
(0.252)
7.5 ± 0.1
(0.295 ± 0.004)
12.0 ± 0.10
(0.472 ± 0.004)
DFS
D2PAK (TO-263AB)
DO-218AB / AC
8.2
(0.322)
1.43 (0.056)
SMC (DO-214AB) /
SMCG (DO-215AB)
SlimDPAK (TO-252AE)
8.3
(0.327)
2.64 (0.104)
10.25
(0.404)
12 (0.472)
SMPC (TO-277A)
W MAX.
25
(0.984)
2.0 (0.079)
16.3
(0.642)
3.91 (0.154)
22.25
(0.876)
16.0 ± 0.10
11.5 ± 0.1
(0.630 ± 0.004)
(0.453 ± 0.004)
12.0 ± 0.10
(0.472 ± 0.004)
5.31 (0.209)
4.0 ± 0.10
(0.157 ± 0.004)
5.5 ± 0.05
(0.217 ± 0.002)
8.0 ± 0.10
(0.315 ± 0.004)
1.53 (0.060)
10.25
(0.404)
2.35 (0.093)
1.61 (0.063)
24.3
(0.957)
12.3
(0.484)
1.20 ± 0.10
(0.047 ± 0.004)
Notes
(1) A , B , and K are determined by the maximum dimensions of the component size. The clearance between the component and the cavity
0
0
0
must be within 0.05 mm (0.002") min. to 0.5 mm (0.02") max. for 8 mm tape and 12 mm tape, 0.15 mm (0.066") min. to 0.90 mm (0.035")
max. for 16 mm tape and 0.15 mm (0.006") min. to 1.0 mm (0.59") max. for 24 mm tape
(2) All surface mount components are packed in accordance with EIA standard 481-E
Revision: 12-Nov-2019
Document Number: 88869
8
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
2KBP005M-E4/45 2KBP005M-E4/51 2KBP01M-E4/45 2KBP01M-E4/51 2KBP02M-E4/45 2KBP02M-E4/51
2KBP04M-E4/45 2KBP04M-E4/51 2KBP06M-E4/45 2KBP06M-E4/51 2KBP08M-E4/45 2KBP08M-E4/51 2KBP10ME4/45 2KBP10M-E4/51 3KBP005M-E4/45 3KBP005M-E4/51 3KBP01M-E4/45 3KBP01M-E4/51 3KBP02M-E4/45
3KBP02M-E4/51 3KBP04M-E4/45 3KBP04M-E4/51 3KBP06M-E4/45 3KBP06M-E4/51 3KBP08M-E4/45 3KBP08ME4/51 3N253-E4/45 3N253-E4/51 3N254-E4/45 3N254-E4/51 3N255-E4/45 3N255-E4/51 3N256-E4/45 3N256E4/51 3N257-E4/45 3N257-E4/51 3N258-E4/45 3N258-E4/51 3N259-E4/45 3N259-E4/51 2KBP01M/1
2KBP005M/1 2KBP02M/1 2KBP06M/1 2KBP04M/1 2KBP08M/1 2KBP10M/1 V20100R-E3/4W VF20100R-E3/4W
VS-HFA25TB60SPBF VS-HFA25TB60STRRP P6KA10/54 P6KA10A/54 P6KA10AHE3/54 P6KA10AHE3/73
P6KA10HE3/54 P6KA10HE3/73 P6KA11AHE3/54 P6KA11AHE3/73 P6KA11HE3/54 P6KA11HE3/73 P6KA12/54
P6KA12A/54 P6KA12AHE3/54 P6KA12AHE3/73 P6KA12HE3/54 P6KA12HE3/73 P6KA13AHE3/54
P6KA13AHE3/73 P6KA13HE3/54 P6KA13HE3/73 P6KA15/54 P6KA15A/54 P6KA15AHE3/54 P6KA15AHE3/73
P6KA15HE3/54 P6KA15HE3/73 P6KA16A/54 P6KA16AHE3/54 P6KA16AHE3/73 P6KA16HE3/54 P6KA16HE3/73
P6KA18/54 P6KA18A/54 P6KA18AHE3/54 P6KA18AHE3/73 P6KA18HE3/54 P6KA18HE3/73 P6KA20/54
P6KA20A/54 P6KA20AHE3/54 P6KA20AHE3/73 P6KA20HE3/54 P6KA20HE3/73 P6KA22/54 P6KA22A/54
P6KA22AHE3/53 P6KA22AHE3/54 P6KA22AHE3/73 P6KA22HE3/54