VS-KBPC102

VS-KBPC1, VS-KBPC6 Series www.vishay.com Vishay Semiconductors Single Phase Rectifier Bridge, 3 A, 6 A FEATURES • Suitable for printed circuit board or chassis mounting • Compact construction • High surge current capability • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION D-72 The VS-KBPC series of single phase rectifier bridge consists of four silicon junctions connected as a full bridge. These devices are intended for general use in industrial and consumer equipment. PRIMARY CHARACTERISTICS IO(AV) 3.0 A to 6.0 A VRRM 50 V to 1000 V Package D-72 Circuit configuration Single phase bridge MAJOR RATINGS AND CHARACTERISTICS SYMBOL IO IFSM I2t VRRM CHARACTERISTICS VALUES KBPC1 VALUES KBPC6 UNITS 3 6 A TC 50 50 °C 50 Hz 50 125 60 Hz 55 137 50 Hz 12.5 78 60 Hz 11.4 71 Range TJ A A2s 50 to 1000 V -40 to +150 °C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V VRMS, MAXIMUM RECOMMENDED RMS SUPPLY VOLTAGE V VS-KBPC1005 50 50 20 VS-KBPC101 100 100 40 VS-KBPC102 200 200 80 VS-KBPC104 400 400 125 VS-KBPC106 600 600 250 VS-KBPC108 800 800 380 VS-KBPC110 1000 1000 500 VS-KBPC6005 50 50 20 VS-KBPC601 100 100 40 VS-KBPC602 200 200 80 VS-KBPC604 400 400 125 VS-KBPC606 600 600 250 VS-KBPC608 800 800 380 VS-KBPC610 1000 1000 500 PART NUMBER Revisio: 18-May-2018 Document Number: 93585 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-KBPC1, VS-KBPC6 Series www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER SYMBOL Maximum DC output current IO Maximum peak one cycle,  non-repetitive surge current IFSM Maximum I2t capability for fusing Maximum I2t Maximum peak forward voltage per diode Typical peak reverse leakage per diode VALUES KBPC6 6.0 TC = 50 °C, resistive or inductive load 3.0 2.4 4.7 t = 10 ms, 20 ms 50 125 55 137 t = 10 ms 12.5 78 t = 8.3 ms 11.4 71 17.7 110 Following any rated load condition and with rated VRRM reapplied Initial TJ = TJ maximum 100 % VRRM reapplied t = 10 ms UNITS A A2s t = 8.3 ms 16.1 1000 I2t t = 0.1 ms to 10 ms, no voltage reapplied 177 1105 VFM IFM = 0.5 x IO, TJ = 25 °C 1.1 1.2 V TJ = 25 °C, 100 % VRRM 10 10 μA TJ = 150 °C, 100 % VRRM 1.0 1.0 mA IRM Operating frequency range Maximum repetitive peak reverse  voltage range VALUES KBPC1 TC = 50 °C, capacitive load t = 8.3 ms, 16.7 ms I2t capability for fusing TEST CONDITIONS A2s f 40 to 1000 Hz VRRM 50 to 1000 V THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER VALUES KBPC1 SYMBOL Operating and storage temperature range TJ, TStg Thermal resistance, junction to case RthJC 4.0 °C - - 5 6 g 0.18 0.21 oz. K/W 8 KBPC1... KBPC6... 3.5 Average Output Current (A) Average Output Current (A) UNITS -40 to +150 Approximate weight 3.0 Resistive, inductive load 2.5 2.0 Capacitive load 1.5 1.0 0.5 0.0 7 6 Resistive, inductive load 5 4 Capacitive load 3 2 1 0 0 93585_01 VALUES KBPC6 20 40 60 80 100 120 140 160 Maximum Allowable Case Temperature (°C) Fig. 1 - Case Temperature Ratings 0 93585_02 20 40 60 80 100 120 140 160 Maximum Allowable Case Temperature (°C) Fig. 2 - Case Temperature Ratings Revisio: 18-May-2018 Document Number: 93585 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-KBPC1, VS-KBPC6 Series Vishay Semiconductors 60 Maximum Peak Output Current (A) Maximum Peak Output Current (A) www.vishay.com KBPC1... 50 From any rated load condition 40 30 20 10 0 10-2 93585_03 10-1 1 Pulse Train Duration (s) 10 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 10-2 93585_04 Fig. 3 - Non-Repetitive Surge Ratings KBPC6... From any rated load condition 10-1 1 10 Pulse Train Duration (s) Fig. 4 - Non-Repetitive Surge Ratings CIRCUIT CONFIGURATION + IO(av) ~ ~ LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95250 Revisio: 18-May-2018 Document Number: 93585 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors D-72 DIMENSIONS in millimeters (inches): KBPC6, KBPC8 15.75 (0.620) 14.75 (0.580) Ø 3.80 (Ø 0.150) 5.33 (0.210) 4.33 (0.170) ~ + 15.75 (0.620) 14.75 (0.580) 10.8 (0.425) 10.0 (0.394) ~ 25.4 (1.000) MIN. 10.8 (0.425) 10.0 (0.394) Ø 1.10 (Ø 0.043) Ø 0.90 (Ø 0.035) DIMENSIONS in millimeters (inches): KBPC1 15.7 (0.62) 16.7 (0.66) Ø 3.8 (Ø 0.15) Ø 4.2 (Ø 0.16) 5.5 (0.22) 6.5 (0.26) + ~ 15.7 (0.62) 16.7 (0.66) 10 (0.39) 11 (0.43) ~ 22 (0.87) MIN. 10 (0.39) 11 (0.43) Ø 0.7 (Ø 0.028) Ø 0.9 (Ø 0.035) Revision: 20-Jan-16 Document Number: 95250 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000