VS-KBPC808PBF

VS-KBPC8 Series www.vishay.com Vishay Semiconductors Single Phase Rectifier Bridge, 8 A FEATURES • Suitable for printed circuit board or chassis mounting • Compact construction • High surge current capability • Fully characterized data • Wide temperature range • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 D-72 DESCRIPTION PRIMARY CHARACTERISTICS IO 8.0 A VRRM 50 V to 1000 V Package D-72 Circuit configuration Single phase bridge The VS-KBPC series of single phase rectifier bridge consists of four silicon junctions connected as a full bridge. These device are intended for general use in industrial and consumer equipment.  MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS Resistive load IO IFSM I2t VRRM VALUES UNITS 8 Capacitive load A 6.4 TC 50 50 Hz 125 60 Hz 137 50 Hz 110 60 Hz 100 Range TJ °C A A2s 50 to 1000 V -55 to +150 °C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS PART NUMBER VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V VS-KBPC8005 50 80 VS-KBPC801 100 150 VS-KBPC802 200 300 VS-KBPC804 400 500 VS-KBPC806 600 700 VS-KBPC808 800 900 VS-KBPC810 1000 1100 Revision: 18-May-2018 Document Number: 93586 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-KBPC8 Series www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER SYMBOL Maximum DC output current IO Maximum peak one cycle,  non-repetitive surge current TEST CONDITIONS VALUES TC = 50 °C, resistive or inductive load IFSM TC = 50 °C, capacitive load 6.4 t = 10 ms, 20 ms 125 t = 8.3 ms, 16.7 ms UNITS 8.0 Following any rated load condition and with rated VRRM reapplied t = 10 ms A 137 78 t = 8.3 ms Initial TJ = TJ maximum 100 % VRRM reapplied 71 Maximum I2t capability for fusing I2t t = 8.3 ms 1000 Maximum I2t capability for fusing I2t t = 0.1 to 10 ms, no voltage reapplied 1105 Maximum peak forward voltage per diode VFM IFM = 3.0 A, TJ = 25 °C 1.0 V TJ = 25 °C, 100 % VRRM 10 μA Typical peak reverse leakage per diode t = 10 ms IRM Operating frequency range Maximum repetitive peak reverse  voltage range TJ = 150 °C, 100 % VRRM A2s 110 A2s 1.0 mA f 400 to 1000 Hz VRRM 50 to 1000 V THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Operating and storage temperature range Thermal resistance, junction to case SYMBOL VALUES TJ, TStg -55 to +150 °C RthJC 6 K/W Approximate weight 9 Maximum Peak Surge Current (A) Average Output Current (A) 10 KBPC8... 8 7 Resistive load 6 5 4 Capacitive load 3 2 1 0 0 20 40 60 80 100 120 140 160 UNITS 6 g 0.21 oz. 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 KBPC8 50 Hz 0.01 0.1 1.0 Maximum Allowable Ambient Temperature (°C) Pulse Train Duration (s) Fig. 1 - Current Ratings Fig. 2 - Non-Repetitive Surge Ratings 10 LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95250 Revision: 18-May-2018 Document Number: 93586 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors D-72 DIMENSIONS in millimeters (inches): KBPC6, KBPC8 15.75 (0.620) 14.75 (0.580) Ø 3.80 (Ø 0.150) 5.33 (0.210) 4.33 (0.170) ~ + 15.75 (0.620) 14.75 (0.580) 10.8 (0.425) 10.0 (0.394) ~ 25.4 (1.000) MIN. 10.8 (0.425) 10.0 (0.394) Ø 1.10 (Ø 0.043) Ø 0.90 (Ø 0.035) DIMENSIONS in millimeters (inches): KBPC1 15.7 (0.62) 16.7 (0.66) Ø 3.8 (Ø 0.15) Ø 4.2 (Ø 0.16) 5.5 (0.22) 6.5 (0.26) + ~ 15.7 (0.62) 16.7 (0.66) 10 (0.39) 11 (0.43) ~ 22 (0.87) MIN. 10 (0.39) 11 (0.43) Ø 0.7 (Ø 0.028) Ø 0.9 (Ø 0.035) Revision: 20-Jan-16 Document Number: 95250 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000